similar to: cisco 7940 firmware upgrade

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

I have a smartnet contract for this phone, and have searched high and low for this file on the Cisco website. I need: United_States/7960-tones.xml English_United_States/7960-font.xml Every road seems to lead to the Call manager express downloads... I don't have a CME, so that's basically useles. Can anyone point me in the right direction? Mikel

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone have the 7970 xml config for sip yet? Aaron

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

I'm having issues with a Cisco 7970. It seems to ignore minor changes in its config file. Is there something like the versionstamp or some other setting I need to increment in order to get the 7970 to update each time? It does seem to download the file from the TFTP server, but it never updates the display or its settings. Thanks Tim

Does anyone know what triggers the 7970 to update its config? I was able to get it to update to SIP, but the config I used initially won't go away. I am making small changes to the SEPxxx.cnf.xml file and rebooting the phone, the phone is downloading the (TFTP) new config file, but I don't see any change on the phone itself. I've looked at the VersionStamp and incremented that, but

Dear all, I have several datasets and I want to generate pdf plots from them. I also want to generate automatically the names of the files. They are country-specific and the element mycurrentdata[1,1] contains this information. So what I do is something like this: pdf(file=paste(mycurrentdata[1,1], ".pdf", sep=""), width=...etc) The only problem I have is that some of the

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

libswfdec/swfdec_bits.h | 2 libswfdec/swfdec_font.c | 289 ++++++++++++++++++++++++++++++++++++- libswfdec/swfdec_font.h | 16 +- libswfdec/swfdec_loader.c | 144 ++++++++++++++++++ libswfdec/swfdec_loader_internal.h | 9 + libswfdec/swfdec_tag.c | 158 -------------------- libswfdec/swfdec_text.c | 12 +

libswfdec/jpeg/jpeg.c | 3 +++ libswfdec/swfdec_bits.c | 18 ++++++++++++++++-- libswfdec/swfdec_edittext.c | 3 ++- libswfdec/swfdec_font.c | 30 ++++++++++++++++++++++++------ libswfdec/swfdec_image.c | 30 ++++++++++++++---------------- libswfdec/swfdec_root_sprite.c | 2 +- libswfdec/swfdec_script.c | 19 +++++++++----------