similar to: FW: Exited non-zero

I've been beating myself up over this script but clearly I'm missing something. If I enter an extension like 101 it rings through fine, but if I pick 2 for sales it hangs up with this message: == Spawn extension (sales, s, 1) exited non-zero on `Zap/1-1' Since I'm not sure what that exacly means I cannot take appropriate action. Any help would be appreciated. [default]

Hi All- I am trying to create a post call survey application. I would like to: 1. ask the caller if they want to take a survey after their call completes 2. If no, just transfer the call 3. if yes, 4. bridge up another extension 5. wait for that extension to hang-up 6. have the system (not the user) transfer the call to different extension that administers an IVR based survey. Anyone

As the thread from the other mailing list he sent this to states, it is illegal to share the file(s) he is asking for. Below is the thread from the sccp users mailing list that he sent this to. <sccp mailing list> 2006/2/28, picciuX In fact: the one you mention is not a config file; it is part of the "Locale-Installer for Cisco Call Manager". You need a valid service contract

Hi all- My TDM long distance is provided by MCI. We use account codes where MCI sends a challenge tone after receiving 1NXXNXXXXXX. Anyone have any suggestions of how to accomplish this? I can't get the soft phones to send the DTMF (the other digits go down the d-channel of our PRI). I also have not bee able to get the dial or the outgoing queue command to work. Anyone run into this?

Hi- I have a 7960 using chan_sccp which gives me a busy signal as soon as I dial the 1 in my string of 915552223333. Can't figure out why. I do have a dialplan.xml file: <DIALTEMPLATE> <TEMPLATE MATCH="*" Timeout="5"/> <TEMPLATE MATCH="#..." Timeout="5"/> </DIALTEMPLATE> Anyone have any insights?

Hello all. I have installed AsteriskNow 1.7.1 with all updates. I'm able to make outbound calls without any problem (the external calls are made via an analog line, and the receiver see the CID). However I'm unable to forward incoming calls to the destination I want. What happens is when I make an internal call I ear a "bye". Bellow is the log of the internal call: --

hello liste i have creat i trunk sip and inboun route for inbound calls the issue whe i use the DID in inboud route i have a error No DID or CID Match. but when i leave this DID field blank i can route the call without any issue how can ido in order to use DID in route inboud "i use elastix" Executing [s at from-trunk:1] NoOp("SIP/358-106-000000c0", "No DID or CID

Whenever I try to drag calls to the Parking Lot or On Hold, FOP would drop my calls. I have searched online and have found similar problem, such as the link below. I have tried their solution but still the FOP is not working correctly. I even installed the HUDLite server and is getting the same results. www.freepbx.org/forum/freepbx/users/flas...ot-transfering-calls Here is the log when I tried

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

Hello. I am running Asterisk v1.6 on Ubuntu 10.10 with FreePBX v2.8. When I call the voicemail for any of my extensions, the call just dies. On a softphone, I get no sound whatsoever; it just hangs up after a couple of seconds. On my handset attached to my SPA-3102, it get a sound like when you leave an analogue phone off the hook. I have three extensions setup and they all do the same thing.

Hi list I'm kinda new to asterisk and I'm woriking for a company that sells Asterisk solutions and appliances. I installed TrixBox on a litle PC @ home and a x100p card which is recognized as a Zaptel card, I made some in/outbound routes and they seem to work but I have a problem with SIP softphones. I created 2 estensions 1000 and 1001 they're both in different cities, when I 1000

Hello, I have setup the n-way conferencing with Asterisk and it's working when I use with my budgetone 100 phone but it doesn't work for any of the voip software or other ATA that I have. When I turned the debug on, I see that the correct keys (*0) were entered but asterisk doesn't detect the signal to trigger the features event. I have set a test extension to get the input dtmf key

i have posted this question couple of times and never really got any hits i wasn't able to provide any debug info Connected to Asterisk 1.6.0.21 currently running on phoneserver (pid = 3309) Verbosity is at least 4 == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 == Using SIP VRTP TOS bits 136 == Using SIP VRTP CoS mark 6 == Extension Changed 117[ext-local] new

Hello, My client customers complaining that their calls suddenly get hung-up, I am just investigating if the problem from my side, I had a log of a hang-up case, Does it help to know if there is a problem that can be resolved from my side? elastix*CLI> -- Hungup 'IAX2/99999-6813' == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on

I have posted my problem on the link below, but didn't get any answer. I am hoping someone here can help me with this issue. Here's my problem: I am using H323 to talk between Asterisk and Avaya IP Office 500. For some strange reason, when we are talking on a VoIP call, we get disconnected after 10+ minutes. We have two other Elastix box, but none of them are getting disconnected. From

Hello, I have an Asterisk @ Home box up and running. I'm trying to prepare the box to be the phone system in our new office. I have 3 Polycom 500's with the latest SIP firmware and all is fine, I can call Asterisk, check my voicemail, call the other handsets, transfer call, even make calls to the PSTN via voipjet. So I'm doing ok. The problem I have now is that when I reboot

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Hi, We are using asterisk 1.4.34, ubuntu 10.4, below is suspicious activity recorded in our full log. Could you help us to explain what had happened. Thanks. === my friend, 801, from his room did a test by dialing echo test in freepbx, *43: [Aug 20 14:42:46] VERBOSE[14427] logger.c: -- Executing [*43 at from-internal:1] Answer("SIP/801-000003f5", "") in new stack [Aug 20

Hi, With Asterisk 1.8.3, I can't figure out how to pass an argument to a macro which is used within an originate command. Here is my sample dialplan to illustrate: exten => 123,1,Answer() exten => 123,n,Originate(SIP/20,app,Macro,foo,bar) exten => 123,n,NoOp(This is the NoOp after the originate command) exten => 123,n,Wait(30) exten => 123,n,Hangup() [macro-foo] exten =>

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,