similar to: dnid support?

Hi all! I'm in the process of configuring an Asterisk server here that, based on which number was called, should send calls to different extensions: 913 - 11111 -> ext. 1 913 - 22222 -> ext. 2 913-11111 & 913-22222 being 2 (of the) numbers we have coming in to our system via our VoIP hosting provider. The config used here is based on Asterisk at home, so it includes also the

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

The problem is some calls from the PSTN have hidden caller id so if you want to change it to something else then modify chan_sip.c #define CALLERID_UNKNOWN "Asterisk" I've changed mine to: #define CALLERID_UNKNOWN "Unknown" -----Original Message----- From: Shaun Ewing [mailto:sewing@gmail.com] Sent: 22 September 2004 14:16 To: Asterisk Users Mailing List

Hi everyone! I have a problem... We have received a couple of phone numbers for voip from a local voip-provider. The work fine directly with a Cisco 7960, but so far I've not been able yet to integrate them into Asterisk. I've tried: /etc/asterisk/extensions.conf ***** [ip-incoming]

Hi everyone! situation: Asterisk-server A: 192.168.11.6 Asterisk-server B: 192.168.2.44 server B contains a register => username:password@192.168.11.6 But... when I boot it, I get: Registered to '192.168.11.6', who sees us as 10.138.3.2:4569 Why doesn't server A see server B as 192.168.2.44?? All other traffic going over these lines has no problems with this. The

Hi! When I call a colleague of mine from my Cisco (via Asterisk), they get on their display: From Evert asterisk How do I remove/change the 'asterisk' part? Regards, Evert

Hi all, In order to use the "open url" function of zoiper (it opens an url based on the asterisk $callerid(dnid)), I need rewriting of the dnid. In my dialplan I have: exten => 1000,3,Set(CALLERID(dnid)=newdnid) exten => 1000,4,Noop(${CALLERID(dnid)}) exten => 1000,5,Queue(test-queue) but the callerid(dnid) shows the extension called (the member of the test-queue) and not

Hi all, I have been looking at various alternatives for a system that runs several Linux & Windows guests. So far my favorite choice would be OpenSolaris+ZFS+RAIDZ+VirtualBox. Is this combo ready to be a host for Linux & Windows guests? Or is it not 100% stable (yet)? Greetings, Evert This message posted from opensolaris.org

Hi everyone! Who can tell me how I can access my voicemail? When I dial the voicemail on my Cisco 7960 I get access, but when trying to enter my mailbox number it seems that Asterisk doesn't 'get' any of the keys I press. DTMF problem perhaps? Any suggestions on how/where to fix this...? Regards, Evert

Hi! If I install a CAPI-compatible ISDN-card in my server, will that: a) enable me to connect that server to the public phone net b) allow me to connect an ISDN phone to the server and use it as a SIP-phone c) all of the above? Regards, Evert

Hi, I'm using videocalling on asterisk 1.4.10. When I setup the videocall with exten = n,1,h324m_gw(s at video2webanswer), I loose the variable DNID (${CALLERID(dnid)}) Before the videocall is set up, this variable is filled and after this videocall this variable is empty. Also all local variables are empty. If al look at the A-number (${CALLERID(num)} this variable is not empty

Hi, We encounter a problem with the variable CALLERID(dnid) We use E1 lines where we can make an inbound call or an outbound call on the same channel (not at the same time) If the CALLERID(dnid) is not used, than the CALLERID(dnid) will be the CALLERID(dnid) of the previous call For example: - First we get a inbound call on channel DAHDI/11-1 with CALLERID(dnid) = '655871460' We read

Hi i have an asterisk pbx with E1 port connected to another PBX. Im trying to send the DNID/DNIS to the PBX here's my dialplan exten => 8881111111,1,Dial(ZAP/g2) exten => 8881111111,n,Hangup() The PBX just get the number 2 as it's DNIS when i change it to ZAP/1 or ZAP/g1 the PBX get the number 1. What should i add to send the extension number as DNID/DNIS? Thanks! --------------

Hi, Yet another question, now that I have callerid working correctly, I'm trying to work out how to utilise the different numbers I have. I have a 100 number range allocated to my E1/PRI/OnRamp service. My incoming calls are handled like this: Advertised/published number is an analogue line terminating on a X101P. If the analog line is busy, it has a call diversion to the PRI on a TE405P

Skipped content of type multipart/alternative-------------- next part -------------- asterisk1*CLI> soft hangup Zap/1-1 Requested Hangup on channel 'Zap/1-1' == Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on 'Zap/1-1' in macro 'exten-vm' == Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' --

Dear Asterisk-Users: Question: ======== How do I get asterisk to pass DNID/RDNIS information between asterisk machines using iax2, in a Dial(IAX2...) command ? Setup: ===== I have two asterisk boxes, MASTER and SLAVE. MASTER is running 1.2.0 and SLAVE is running 1.2.1. The main box handles incoming calls on a multiple lines (both via hardware connection to our internal PBX and calls

Hi Guys I have just installed a call center onto Suse 10. I have managed to do a DBget (astdb) and extract the DNID numbers to play a DNID specific greeting. We have installed Snom 320 and the customer would like us to Send the DNID(nam) to the phone screens so that the agent will be able to answer in the correct language and with the specific customer company name (ie. Agent says

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

Hi, Does anyone has a *working* patch to set the dnid from extension when it is now supplied, cos this plugin doesn't working without it. I tried and it passes empty string. THX -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030516/aae0a7f4/attachment.htm

From a 'sip debug': Sip read: SIP/2.0 100 Trying From: "Evert"<sip:[username]@[my ext. IP]>;tag=as6e18534e To: <sip:[dialled number]@[SIP server of VoIP provider]> Call-ID: 6cbf41c25281f08b2e7bbc5043061975@[my ext. IP] CSeq: 102 INVITE Via:SIP/2.0/UDP [my ext. IP]:5060;branch=z9hG4bK4fd1045b Content-Length:0 7 headers, 0 lines Sip read: SIP/2.0 403 Forbidden