similar to: How to register a SIP phone on Asterisk behind NAT

Hi all, What are the best and free tools for remotely adding, removing users on Asterisk server and also for monitoring the status of the Asterisk server, like how many users are logged on etc. I need tools for which I don't have to pay. Thanks, Zeeshan A Zakaria www.acabling.com <http://www.acabling.com/> -------------- next part -------------- An HTML attachment was

Kevin, Are you in the US? If so then you've probably got several carriers to choose from. In my experience analog lines have a flat expense of $20-$25 per month. That equates to about $140-$175 per month in flat fees, plus you have usage on top of that. (Your experience may vary.) I am currently experimenting with a company out of NY called Digizip (www.digizip.com) that sold me a Qwest

What kind of help do you need then? Regards, Jan -----Ursprungligt meddelande----- Fr?n: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] F?r Zach A Skickat: den 6 februari 2006 18:31 Till: 'Asterisk Users Mailing List - Non-Commercial Discussion' ?mne: RE: [Asterisk-Users] Help on queues There is no good help on wiki and voip-info.org, I've

Campon, mini-queues, see asterisk tips and tricks on voipinfo... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zach A Sent: Monday, February 06, 2006 1:01 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Help on queues I need practical examples showing

Kernel is 2.6. zaptel and ztdummy load with Linux, so I can check in lsmod that they are loaded. They load without any problem, I've loaded them manually too. Zach A -----Original Message----- From: Dovid Bender [mailto:asteriskdigium@yahoo.com] Sent: Friday, March 10, 2006 6:13 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] how to check if

Dears; I am facing a problem in disconnecting the calls, it is related to the rtptimeout (disconnecting if there is no RTP packets from both sides). My Asterisk Box is behind NAT but there is a static real IP address at the ADSL router. We call from the Mobile to the PSTN analogue numbers which are connected to Asterisk Analogue card (the telephone lines are analoge), and then we dial the

We had very similar problems to this which drove us insane for ages. Basically we use VoIP trunks (SIP) for all our inbound + outbound calls. Call quality was good however we would get random problems where people could not hear us or us hear them for about 5-10 seconds at a time. After weeks of trying to get to the bottom of the problem it appeared our VoIP trunk provider (sentiro/sip2go) had

Hi everybody, I finally want to get rid of 1-way audio problem. Please help me here. I have 3 scenarios. 1. Audio is always one way. Caller who dialed can't listen the called party but called party can listen him. In this scenatio Asterisk is on dynamic IP with dyndns FQDN. sip.conf has externip = abc.dyndns.org and localnet = xxx.xxx.xxx.xxx entry. Trunk and extensions are SIP. Where is

Hi List; I heared that IAX is good for NATing issues, but I do not know if it can help me in that senario: I have two Asterisks machines in different sites and both are behind NAT (both have private IP address), I need to link these two asterisks with IAX trunk (if it help really in such senario), but I do not know if it will work without doing special routing settings on the router (like

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

Thanks Peter and Tim. Being that said, can I be sure that for 64 bit arm architectures (e.g. arm cortex A57) the neon feature and auto-vectorization is supported as default by clang 5.0? Because for us these two features are deal breaking for compiler evaluation. Mit freundlichen Grüßen / Best regards Zeeshan Haider Chassis Systems Control, Engineering Software Coordination, Software

On Fri, Feb 3, 2017 at 12:03 PM, Renato Golin <renato.golin at linaro.org> wrote: > Adding some people that know about libcxx and/or windows on arm. > Note that if you are trying to use Windows on ARM port, I've not tested C++ support with MS ABI, onlly the itanium ABI has been tested (there are known limitations for the C++ MS ABI on Windows ARM). Furthermore, we do not

OK this is the RTFM question of the day but I need a sanity check. I have 2 Astra 51i phone and a linksys PAP2 on a single DSL connection. 2 Aastra 51i---------| |-NAT on dsl moden--(Internet)--Asterisk PAP2t----------------| The DSL modem/router which has QOS set for the src and dest to the * box the PAP2 has both lines registered @ ports 5060 and 5061 and work like a charm. one of the

One more thing, setting up clang 5,0 on windows, I have issues compiling libcxx project. Is it supported to be built with Visual studio or MinGW make files? Mit freundlichen Grüßen / Best regards Zeeshan Haider CC/ESM1 Tel. +49(711)811-47379 -----Original Message----- From: Tim Northover [mailto:t.p.northover at gmail.com] Sent: Freitag, 3. Februar 2017 18:05 To: Haider Zeeshan

Hi there, I am Software product developer at Robert Bosch, Germany. We are using armv8 64bit targets for our development. We have the need to do the cross compiling for our target on windows. I have compiled clang 5.0 from the vcs git. I have tried compiling the code with following options set: clang.exe -target armv8 -fslp-vectorize-aggressive -mfpu=neon -mfloat-abi=hard -c test.cpp As you

sorry for typo mistake in my last post. as from my orignal post two registration of the same user are as follows SIP/XYZ at 119.68.0.90:5060 SIP/XYZ at 202.16.34.10:5678 so dial command with unique-id i want to use will be Dial(SIP/XYZ at 192.168.0.20:5062-096afee8,30,rtT) Dial(SIP/XYZ at 192.168.0.12:64290-0966ab80,30,rtT) and not Dial(SIP/192.168.0.20:5062-096afee8,30,rtT)

snom 300 :"> CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Kristian Kielhofner Gesendet: Mittwoch, 1. November 2006 12:01 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: Re: [asterisk-users] Which IP phones have best voice quality,preferably under $150 Zeeshan Zakaria

Hello, we have an asterisk (1.4.21.2) with ZAP and mISDN channels, the mISDN are 2 incoming GSM Modems, each with 2 simcards. No, the mISDN line one and two are fine, but when I get a call on line 3 something with the time is wrong. Timeconditions fall through to off-hours even if the time of the call is clearly inside business hours, here a log excerpt: [Aug 26 11:04:36] VERBOSE[3112]

Hi All; I succeeded to have a success call from Polycom behind NAT while Asterisk has public IP address, but I was not able to have a succeed call (it was established, but no voice running, and then the call disconnected) if Asterisk behind NAT and Polycom behind NAT. When Asterisk behind NAT and Polycom behind NAT, I forwarded the 5060 UDP to asterisk (at asterisk router) and to Polycom IP

Hi All, I've an Asterisk Server behind a NAT. Using DNAT, I've opened port 5060 and all 10000:20000 udp. Sip configured with externalip and subnet. I've another site, also with NAT, where I map the rtp port (as defined in the client) to map to the local client (DNAT). Using Xlite, this configuration works, it requires using the quality=yes and NAT=yes/always in the sip ext