similar to: Sip Behind Proxy

How do I route all the outgoing calls through a SIP gateway, this should send more than one outgoing call to the sip gateway at once. please show me the sample configurations on how to do this. my SIP gatway can accecpt direct IP traffic or SIP proxy traffc. Thank You Kanishka -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I am going to install asterisk on an AMD server, did any one had problems installing it on an AMD server ? Regards Kani

I've got the same problem. MusicOnHold works if I use something like: Exten => 1111,1,MusicOnHold() but if I try to answer a call and then transfer or put on hold the call, I get no music. Does anyone have any idea? Bye, Gianluca. _____ Da: Kanishka Somaratne [mailto:kani@technoportal.biz] Inviato: gioved? 17 marzo 2005 5.53 A: asterisk-users@lists.digium.com

I am trying oh323(version 0.67) , make call from sip UA to h323 gateway, can't get Call-id pass from sip UA to h323 gateway, h323 always gets call-ID sent from Asterisk as *. are there any configure to pass the correct call-id from sip UA to h323 gateway? or this is a bug in oh323 0.67? how about oh323 0.73 ? Mario On 9/29/05, Kanishka Somaratne <kani@technoportal.biz>

Hi, I'm trying to configure Sipura 2000 (behind NAT) which connects to Asterisk (public IP, no NAT) and having interesting results. When Sipura is behind Linux/NAT firewall it works great and no special NAT settings on Sipura are necessary. The issue I'm having is when Sipura is behind Linksys broadband NAT router. Sipura gets registered with Asterisk just fine, but I can't hear

Hello Asterisk-users, I'm a long time reader, first time caller. I've recently set up an Asterisk network in my house that I eventually want to use to support my small business. I bought a Sipura-3000 and I'm currently running Asterisk on a server I was already using. Everything is working nicely. I can make and receive calls. (important step) I have a basic IVR. The voicemail

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

Can anybody point or provide working configuration how to register Sipura to Asterisk over the Internet. Both Sipura and Asterisk are behind firewalls. I'll be force to use SIP as that is the only protocol that Sipura is using. Do I need to enter any "STUN Server:" setting in "SIP" tab. On Asterisk I think I only need to make changes in sip.conf isn't it? What

why can't we compile the asterisk coading in windows, it's done in c++ so it should work in windows as well

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

I'm having a problem, I'm not sure if it has todo with the fact that my phone is behind a NAT or not, but here it is.. My problem is when I call out, my asterisk system routes the call to my SIP provider, whoever, as soon as the other party answers, asterisk tries to make a native bridge for the call, and then the call drops instantly. However, if I keep asterisk in the middle (by

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a

I have Sipura 841's talking to a CVS-HEAD of August 4. If I disconnect the power to the Sipura, Asterisk does not hang up the channel. My sip.conf for this phone looks like: ; [super1] ; Sipura 841 disallow = all allow = ulaw callerid = "super1"

Hello, We have one production server that is identically configured to another production server except for the fact that they each use a different type of digium quad T1 card(one has T400P and one has TE405P). The server with the 405 has been developing delay problems with Sipura SPA-2000 phone adapters after a call has gone on for 15-30 minutes (up to 1 second audio delay). I asked Sipura and

The configuration I'm building replaces an existing PBX with Asterisk. There are 8 existing modems that people use to call in from the outside to connect to PC(s) on the inside to transfer data, etc. Callers access these modems by calling the main number and then dialing an extension for the modem they want to talk to. What are my options for supporting these modems with Asterisk? Here are

I have several SIP devices (Sipuras) that are working fine with *, except for one annoying little problem. Occassionally, after being registered for some period of time, the Sipura returns a 404 Not Found to (I assume) an INVITE request. Of course, this makes the extension appear busy. When this happens, I check the Sipura and it is thinks it is still registered and I check * and it shows

I'm still unable to get my SPA-1001 to work behind NAT with an Asterisk box out on the Internet. It works fine to my local A@H box. I've tried... many things. I'm willing to pay a $250 bounty (PayPal preferred) to anyone who can help me get it working. Any Sipura experts out there? Eric.

What is the best solution? I dont want to have modify firewall's at all or do port fowarding. Ideally I would like a solution that with either a softphone or wireless hardphone one could connect via friends, family, or hotspots without reconfiguring their devices. What are people using? STUN? SER? Thanks in advance! -blake -------------- next part -------------- An HTML attachment was

Hello list, I have several SPA-2000's and 3000's scattered about the Internet (all behind NATs). Because I do not qualify as an ITSP, Sipura will not license their "Sipura Profile Compiler" so that I can have the units remote upgrade, remote re-configure, etc (via TFTP or HTTP). This is extremely annoying. Right now if I have to make a config change to any of these

I have been trying to read everything I can find on Sipura 2000 and Asterisk. I am trying to make the Sipura-2000 act as two analog lines off my asterisk. I have followed (what I believe) the example on http://www.voxilla.com/Article39.phtml and I still can't get my Sipura to register with my Asterisk server. I can re-config my Sipura to talk to fwd, or voice-pulse connect and it works