Displaying 20 results from an estimated 10000 matches similar to: "ZAP - configure not to answer?"
2003 Oct 22
2
X100P Manually Answer
I have an X100P used, at present, largely for outgoing calls. It shares the
single incoming POTS line with a number of analog phones. Is it possible to
talk the X100P (Zap/1) to answer a ringing call only if I ask it to? I'd
like to use only the SIP phone in my office, but let the analog phones
continue to work in the rest of the house (until I can afford FXS cards
anyway..)
I can force
2004 Dec 16
3
Detect line is busy with Zap?
Hi,
I have an FXO card connected to my phone line which works in Asterisk as
Zap/1.
Is there any way of detecting whether something else is on the line
before picking up on this channel?
For example, I dont want to pick up and dial out on the line if someone
is on it using another phone (which is connected directly to the line,
rather than through Asterisk).
Also, when an incoming call comes
2004 Oct 06
1
Hello - Simple SIP configuration
I'm new in hire so Hello to everyone!
I'm beginner user of Asterisk CVS-HEAD-10/01/04-14:31:34 . I just installed
it on my Mandrake Linux 10.0 kernel 2.6.3-4mdk with sample configuration
(used make samples).
I would like to make phone connections between X-Lite (SIP) installed on
computers in LAN. How to make this? I was reading manual, and tried to make
changes in sip.conf but this all
2005 Jul 16
2
beginners question about extension context
Hi, all
I have couple of SIP phones and they are in [from-sip] context.
I also have an IAX2 phone. I have put this one in [iax-user] context.
I want to make calls between SIP and IAX2 phones. If I put them all in same
context all is fine, however when they are in different contexts they will
not call each other and I will get message (in * CLI) that particular
extension does not exist in a
2005 Jan 09
4
Asterisk Demo
Hi,
I need to setup a demo for asterisk and need some help here please. The demo
is connecting to Asterisk a Cisco 7970 SIP (ver. &.0) and a SIP client on HP
iPAQ via a wireless hotspot. I need to configure both with the same
extension with a shared line like in Cisco CallManager. This way if the
extension is called both iPAQ and the IP phone ring and the user gets to
pick up using either.
2005 Jan 13
7
How to set asterisk NOT to answer incoming lines?
How do I set asterisk not to answer incoming PSTN POTS calls? I want to
be able to use the line for outgoing calls only.
-Thanks
Tim
2004 Aug 16
1
* and answering machine
I'm using * at home and I planned on having * let the answering machine in my
kitchen to the "general" voicemail getting. However, about 6s into the call *
will hang up the line.
I found a post about OHT somethingorother, so I can probably work around it,
but I'd like to know what's happening and if there's a better way around.
Thanks!
--
-M
There are 10 kinds of
2005 Aug 05
3
Very complicated dialplans?
Hey,
how can I implement a dial plan like the following:
incoming call:
1. ring phones 1,2,3 monday to friday between 9:00 and 20:00; if no
answer after 15 sec also ring phones 4 and 5
2. ring phone 1 monday to friday between 0:00-9:00 and 20:00-24:00; if
no answer after 20 sec also ring phones 2 and 3
3. ring phone 1 saturday and sunday all day
I do not need a in detail answer for each of the
2006 Jun 25
3
Zaptel answering the Line
I have a TDM400 card with 3x FXO and 1x FXS ports on it.
At the moment I'd prefer (till I can get it working more reliable with
iaxmodem), for a faxmodem to answer one of the lines instead of the
linecard.
I've tried changing the context of that line so that the exten => s does
nothing, but that stops the line from being able to receive calls (get a
recorded This number is not
2005 Mar 07
1
Custom Development
Hey guys,
I'm looking for a programming or Development Team/Company to do some custom
coding for Asterisk. What we need is not exactly simple. In fact, I'm not
sure the extent of the coding as far as technical terms go at all.
Currently we have a "call center" with 4 phones. There will be a total of 8
people using the phones. Obviously, no more than 4 people will use
2006 Apr 27
1
Excessive Asterisk delay to answer on ZAP inboundcall
Open the console with verbose turned up. Make a test call and see where
it is hanging. That will isolate the problem.
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
> bounces@lists.digium.com] On Behalf Of Giorgio Incantalupo
> Sent: Thursday, April 27, 2006 11:16 AM
> To: Asterisk Users Mailing List - Non-Commercial
2005 Jun 14
8
Making Asterisk NOT Pickup a Line when Ringing?
Hi,
What do I need to do to get asterisk to NOT pickup a Zap channel when
it rings? The channel in question is used for outbound calls only,
and all incoming calls are answered by an analog phone elsewhere in
the building that does not run through asterisk... so.. either make it
not answer.. or make it delay for like 90 seconds.. I've tried
wait's.. but it still seems to pickup the
2006 Feb 27
7
TDM400P digium card
Okay everyone -
I'm moving away from using sipura 841 phones. I'm starting to test with
Polycom IP 501 phones. We plan to upgrade our server to a dual t1 but,
for now we have a digium tdm400P with 4 analog lines coming into it. So
my question is will upgrading the IP phones with my existing digium
tdm400 card be enough to satisfy my users ? or is it really a combo
deal needing to
2006 Apr 20
1
How to stop Asterisk picking up my incoming calls?
2006 Feb 01
3
Dumb Dialout Question
I'm still trying to learn some parts of Asterisk, so sorry in advance for the dumb question!
How do I set up an extension to dial out to the PSTN through my ZAP interfaces? I want the ability to have a ring group that will ring all of the phones in an office and then ring cell phones if nobody answers. I'm sure this is simple to do but I'm at a loss.
I have tried the following
2011 Oct 12
3
FXS ports on TDM410P card...
My analog card, uses a PCI slot and a 12V power connector, is configured
with 2 FXO and 2 FXS modules. I can ring handsets connected to the FXS
ports but I can't dial out from them. Is extensions.conf where I need
to make changes?
[root at robin asterisk]# cat chan_dahdi.conf
[trunkgroups]
[channels]
[phone](!)
usecallerid = yes
hidecallerid = no
callwaiting = yes
usecallingpres = yes
2005 Feb 22
1
Astersik CVS HEAD + T1 e&m wink + IAX client doesnt detect call answered on Zap channel
Hello,
I've got very annoying behaviour from our asterisk PBX.
We have 12 channels T1 e&m wink start for TDM and using iax softphones
internally (iaxcomm, but tried firefly-thirdparty and discarded for
bad sound quality).
Slackware 9.1 w/ kernel 2.4.26+ digium TE110P card.
In some cases when call is placed from softphone to TDM, system does
not detect call answered on Zap channel and
2009 Feb 26
2
Problems with Outbound Calls
Hi everyone!
I'm quite a newbie at this Asterisk stuff so please bear with me.
We've recently decided to start training in Asterisk via AsteriskNow!
Asterisk version is 1.4.18.1 through AsteriskNow! 1.02
The box we have is paired with a Digium TE110P and we've managed to get
it to the point where incoming calls via a single DID (from NTT Japan)
can be received and answered
2007 Jul 24
2
Dial out through multiple Zap groups
Hi,
I'm trying to set a rule to dial out through multiple
Zap groups so that, say, g0 is the cheaper POTS lines
group
and must be used first. However, if g0 is busy or
disconnected then try dialing out g1.
My g0 group is made up of 4 analog lines connected to
a 4-FXO card. I disconnected the RJ-11 wires from the
FXO card
to simulate a line disconnection. So theoretically all
calls should
2008 Apr 01
4
Voicemail- Recorded Mesage Low Volume
Asterisk Users,
I am running Asterisk 1.4.11, Zaptel 1.4.5.1, and Librpi 1.4.1 on a Debian "Etch" system. On the recorded voice mail messages, the volume is really low when retrieving them with my cell phone. I tried with multiple cell phones with the volume level high and still, the same problem. I tried to increase the rxgain to 12.2 in the zapata.conf file and it had no affect on