similar to: Asterisk featdmf signalling.

Hello, I'm trying to make my asterisk box to act as a telco, in order to reproduce a US environment in europe. Our telco provider is giving us those settings: ESF B8ZF Inbound = E&M Immediate Outbound sig =Wink Start Yield to Glare = Yes Those trunks are using CAS for signaling. I have tried many configs/combinations in zaptel.conf and zapata-channels.conf In zaptel.conf, when having

Dear all, I've recently encountered a strange behaviour when using R with portuguese accented characters. The most curious aspect is that using the same code with ESS under XEmacs the behaviour is different. My system is: > R.version _ platform i386-pc-mingw32 arch i386 os mingw32 system i386, mingw32 status major

Has anyone ever setup Asterisk to pass Feature Group D access while using a CIC code for outbound calls? If so can you please email the configuration you have done? I have tried to get this up and running but with no luck. I have also contacted support and I cant seem to get this going. Thanks in Advance, Jason Miller

The cell companies are "doing it" like they think makes sense. If they know your cell is off/out of range they route instantly to VM. They could give "4-10 rings" of fake effort, but why. With follow me roaming and such, they want to process the call as fast as possible. If they don't know if the cell is available, they may go through about 4 rings of searching, but

The cell companies are "doing it" like they think makes sense. If they know your cell is off/out of range they route instantly to VM. They could give "4-10 rings" of fake effort, but why. With follow me roaming and such, they want to process the call as fast as possible. If they don't know if the cell is available, they may go through about 4 rings of searching, but

I'm presently working on an office move and evaluation of telecommunications services needed at the new location. I'm presently wrastling with an issue related to portability and geography between landline carriers. Presently certain people within the organization are hopelessly in love with our 909-822-xxxx number(provided by pacbell/att). As that number is presently provisioned it

I have been having problems dialing into Verizon conferencing using my * system. If i dial using a POTS line directly, the dtmf codes for the conference room are recognized with no issues, however, verizon doesnt recognize the keys when i press them as being a valid code. I remember something a while back (unfortunately - lost all my IMAP email) - Something about verizon lines and dtmf and

I've got a new setup (different building) where Asterisk is sitting between the PBX and phone company on a E&M T1 line. Mitel PBX <-> Asterisk <-> Phone company Inbound works. Asterisk gets the in-band digits from the phone company and hands the call off to the Mitel just fine. Outbound is weird. Asterisk seems to expect that the mitel will send routing information

Hello, is there a full guide to what kewlstart is supposed to do with FXO or FXS lines ? is it only applicable to one of the interfaces FXO -or- FXS but not both ? I asked earlier if FXS lines can be made to reverse polarity, and someone else pointed out that the chipset on the FXS ports seems to support it, perhaps the driver in the asterisk zaptel interface module needs to be modified to support

I'm trying to use RDNIS with asterisk, and I don't appear to be receiving any information (the value is blank). The upstream who provides the PRI says they are passing all the info through, I don't see this value coming across. I've tried it with a Verizon call forward, as well as a Nextel with the same results for both. I'm trying to use this for Voicemail. I'm using

Hi, I've got a problem with some grandstram devices (namely a couple of budgetone 101 and an ata-486). The point is that, unless I use inband for DTMF, asterisk ignore the first digit dialed. Inband DTMF forces me to use A-law/Mu-law, which is not what I want. BTW, this appens after a Playtones(), waiting for user entering an extension. I've tried many solutions, played around with

-------- Forwarded Message -------- From: Michael Baird <mike at tc3net.com> To: Timo Sirainen <tss at iki.fi> Subject: Re: [Dovecot] strip domains Date: Wed, 12 Apr 2006 10:42:43 -0400 On Wed, 2006-04-12 at 17:17 +0300, Timo Sirainen wrote: > On Wed, 2006-04-12 at 09:48 -0400, Michael Baird wrote: > > I don't > > know why there is so much resistance to supporting

I'm having a problem with Verizon Wireless. I would be extremely surprised if I was the only one having this problem. It seems to me that Verizon Wireless might be able to use one of the Special Information Tones to allow us to solve the problem. But I really do not whether my suggestion is compliant with the ITU-T standards. Perhaps someone can give me an expert opinion on whether I

I've dug down as far as I could on www.uspto.gov for anything remotely close to what is going on with Verizon and all searches end with only two possibilities in regards to what is going on. So unless the patent was issued to someone else and Verizon bought it, these are the only two possible patents this case could be based on... US 7,142,646 B2 Voice mail integration with instant

Hi, I HAD Verizon ONLINE. I was ABLE to mount samba served machines from the internet... eg \\strange.dreamhost.com\ from my XP box. I switched to Verizon AVENUE. Now I can't. (When I go through a VPN, though, I am able to mount the directory going around Verizon Avenue's network) I'm thinking this is a port restriction that Verizon Avenue has going on. I'm trying to

After having looked around on google, voip-info, etc, I am coming here for a bit of insight from anyone who might be willing to provide some.... I am using * (it's A@H, but this should apply to any * install) to handle my home phone line. I have a TDM11B card, and my Verizon line comes in on the FXO port and my cordless phone is plugged in to the FXS port. Everything works just

Hi, I'm having a problem with Verizon Wireless, I'm hoping someone here knows the right way to phrase the trouble report so it gets to someone at Verizon who can solve the problem. We have DIDs that simultaneously ring on voip lines, and Cell numbers. Verizon voicemail is turned off. Every thing works the way it's supposed to, UNLESS one of the cellphones is turned off, or in a

Thanks for answering my question guys :) Guess I'll have to try it and find out, but will keep everyone posted... Greg -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Tuesday, January 24, 2006 7:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE:

I just went through an exercise of writing a Perl script called from my Asterisk dialplan to look at a list of area codes and exchanges to determine which ones are local (no or little cost) under my current Verizon plan. I route calls outside of my local limits to Gizmo. It works fine but when I called Verizon to change (lower) my service it was a bewildering spider web of rates structures just in

We are in the prossess of ordering a ISDN (PRI) line from Verizon. There are a couple of questions on the application that I don't understand. I'm still a newbie here but we're taking the big plunge. If someone could give me some direction here I would be greatly appreciative. The questions on their app that I don't understand are: 1.) The Verizon Co will outpulse 10