similar to: select codec based on extension

[root@iw-asterisk zaptel-1.2.1]# make gcc -I/lib/modules/2.4.21-4.ELsmp/build/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/lib/modules/2.4.21-4.ELsmp/build/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/lib/modules/2.4.21-4.ELsmp/build/drivers/net/wan -I/lib/modules/2.4.21-4.ELsmp/build/include/net -DMODVERSIONS -include

Hi All I'm trying to get two Asterisk servers to talk to each other using IAX(2). I've read the WiKi and the docs and tried the examples..... I can't get it to work (I have 2 x 7960's registering on one server and 1 x 7960 registering on the other). I've set them up as follows... The two servers are set up as friends and have consecutive IP address's. The setup is

My PBX seems to have just started showing wierd codec negotiation problems. I'm not all of a sudden getting this on certain phone numbers on my system: Feb 8 22:19:19 NOTICE[1125329728]: channel.c:1683 ast_set_read_format: Unable to find a path from ULAW to G729A Feb 8 22:19:19 NOTICE[1125329728]: channel.c:1650 ast_set_write_format: Unable to find a path from G729A to ULAW --

I am experiencing a problem that from list archive it appears others are running into. When I dial from Cisco 7960 via the * to Free World Dialup destinations that supports G.729 the call fails. The major error from the debug log is Jan 15 00:11:14 NOTICE[22545]: channel.c:1481 ast_set_read_format: Unable to find a path from G729A to ULAW Jan 15 00:11:14 NOTICE[22545]: channel.c:1451

I receive the following error when I try to call another H323 extension from another H323 when going through *. NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to find a path from 1 to 8 NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to find a path from 8 to 1 WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit frame type 1,

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

Hi all, I have a Cent OS 5 box with a fairly full install which I'm trying to strip down. Since this machine will be running headless I would like to remove all of the X11 stuff which is installed on it. However, it seems that the "redhat-lsb" package, which I would like to keep, is dependent on X11 - redhat-lsb depends on /usr/bin/lpr - /usr/bin/lpr is provided by cups -

I have a ATA 186 with SIP firmware 3.1 when I changed the configurations to use the g.726 codec I received many erros and the calls doesn't work. I changed the fields: - LBRCodec: 6 <- the code for g.726 - TXCodec: 6 - RxCodec: 6 The errors: Jul 9 13:15:37 NOTICE[1192491824]: rtp.c:500 ast_rtp_read: Unable to calculate samples for format G726 Jul 9 13:15:37 NOTICE[1192491824]:

Hi, Asterisk is new for me. I had a working configuration, but suddenly I can't call anymore with my voip provider. I am not aware that I changed anything in the configuration, but who knows. Can somebody explain me what is happening here? I changed username, password and number. -- Executing Dial("Zap/2-1",

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

Dear All, I just setup the Asterisk with E100P which it's no problem in Dial In but I have problem when outdial. The connection method is like this : E1 PRI <-SIGNAL-1-> MaxLink (PBX) <-SIGNAL-2-> E100P <-> Asterisk <--> SIP \-----> Analog PHone Now when I tried to dial out by SIP X-Lite on Windows, it shows me Connect, Trying,

Whenever I take an inbound call I am getting the following errors: NOTICE[4719]: channel.c:1698 ast_set_write_format: Unable to find a path from speex to gsm NOTICE[4719]: channel.c:1731 ast_set_read_format: Unable to find a path from gsm to speex What typically generates this issue? ~Dan

Hello, I've successfully installed Asterisk from last CVS and configured it for using with DLINK-DG104S as mgcp CPE and PGW2200 as external sip server. All are work fine at G711 codecs, but then I disable all codecs except g729 some calls failed (Not all calls. Some calls passed at g729 succesfully). All my devices configred to use only g729 and I don't see other codecs at mgcp or sip

Hello everyone! I tried to send a fax over SIP with an Asterisk Server in the middle (no Digium Cards, etc. installed, everything is SIP only, the PSTN-Gateway is external). Whenever I start sending a Fax to a PSTN destination, the Call gets answered and asterisk tries to build a native bridging: -- Attempting native bridge of SIP/sip.westend.com-082fd1b8 and SIP/xxx-3ef8 Then the following

I know this is slightly off topic, but I was wondering if anyone can help with a problem getting my PAP2's to connect to Asterisk. I use a provisioning file, and I recently re-wrote the files for each PAP2. I had a small typo and the PAPs logged it as a corrupt file. I corrected the file, however, Line 1 on both of the PAP2's now wont register. Line 2 works fine though. I've done the

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

This was submitted to the Dev list last week, but there was no response, and perhaps it wasn't the right group. I am developing an application in which I need asterisk to pass on an incoming call to a separate IVR server. The problem is that asterisk appears to hang up while the IVR is playing back a sequence of recorded voice and systhesized voice prompts. My setup is: Analog line

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

We are having lots of problems with stanaphone. It used to work ok, but now it's terrible. As of this moment, can't make outbound or inbound calls. Anyone has it working? Please provide sip.conf example commands.. Thank you -- Leandro Rzezak leandror@gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I am trying to connect linphone 0.12.2 to an * 0.9.1 box over a LAN using the console version of linphone. both boxs are using the latest alsa drivers on a LFS kernal 2.4. I am running into errors with codec compatability between linphone and *. A point to note is that I am able to connect to asterisk using other sip phones noteably sjphone however linephone is giving me