similar to: RE: Asterisk-Users Digest, Vol 15, Issue 85

Hi to all, I have been using Wildcard TDM400P with four fxs modules and it was working fine now I have added another Wildcard TDM400P with four fxs modules . So there are total 8 ports for 8 hard phones. I have modified following configurations In /etc/zaptel.conf loadzone=us defaultzone=us fxoks=1-8 in /etc/asterisk/zapata.conf context=headoffice signalling = fxo_ks

OK, I asked this about a week back and met with no repsonse at all. But perhaps its worth trying again. Does anyone on-list have * running BRI to their local telco? I'm considering this as an alternative to my TDM400p card. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc.

I have an eight channel fxo setup (2 TDM400P cards) and I have them setup. Here are my configs: Zaptel.conf: fxsks=1-8 loadzone=us defaultzone=us Zapata.conf: [trunkgroups] [channels] musiconhold=default rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callerid=xxxxxx callwaiting=yes busydetect=no callprogress=no usecallingpres=yes callwaitingcallerid=yes

OK, I've spent way more time than I wanted to on getting an x100p clone to work in Australia. I'm happy to consider other (more functional) options. Does anyone have an opinion on both the Sipura 3000 and other Digium cards (like the TDM400P)? I need something that works with no much fuzz. I know the Sipura 3000 is cheaper the the TDM400P card. All I need is to channel my POTS line

<div><BR>Hello,</div> <div>&nbsp;I bought a TDM400P, and intended to use it with my analog phone, which is RJ11 ofcourse. So, the question now, how do I plug in my RJ11 phone to the TDM400P card, which has an RJ45 interface? Also, since it's an 11B card, I also intend to bring in an analog line into the RJ45, so i am still left with the same question....how do I go

I'm looking to add a single FXO port to my Asterisk box. It looks like my options are a Digium Wildcard X100P off eBay for $6.99, or a Wildcard TDM400P with an FXO Module from Digium for $125. Can anyone explain the tradeoffs (other than the ability to put 4 FXO/FSO modules on the TDM400P). What about RTC for the system - I know the TDM400P provides it. Does the X100P? Thanks!

I would like connect two offices where one office have 4 PSTN Analog lines and another office without any PSTN. Both the offices will have two separate Asterisk server with TDM400P cards (4 ports FXS & FXO). My questions is that how to configure Asterisk to forward the PSTN calls directly to another Asterisk which has the TDM400P card without pressing the extension number. Diagram like

Here is my system: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard) CPU AMD|2500/333 ATHLON XP BARTON R(Standard) DDRAM 256M|DDR333 PC-2700 -K %(Standard) HD 40GB|WD 7200RPM 8MB WD400JB%(70) VGA ASUS|V8170MAGICII/T 64M MX440SE(58) CD ROM 56X|AOPEN CD-956 RTL(22) Besides the above parts, i have 2 X100P FXO PCI cards, and 1 TDM40B I bought 2 phones from radio

We are experiencing problems with FXO modules on TDM400P. From time to time they stop responding to incoming rings although they work fine if we use them to dial out. It's been verified at least in two different installations (using different mainboards) in two different locations. The only solution to the problem is to stop asterisk, then unload and reload kernel drivers. The problem appears

All, I've recently installed a TDM400P and am unable to get it working. It has four FXO modules on it. What I would like to do is have the first two ports as inbound from pstn and have them ring the last two ports which will be connected to regular analog phones. In Zaptel.conf I have: fxsks=1-4 In Zaptel.conf [channels] context=default switchtype=national rxwink=300 ;

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!! I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please: dahdi_scan ---------- [1] active=yes alarms=OK

I am about to try our TDM400P E model from the developer kit (not the "Lite") we just got and noticed a large number of reported problems. I had the CVS from Sep 12 (or so the CVS/Entries file has in it). My drivers seem to modprobe fine. My card show up as "Found a Wildcard FXS: Wildcard S400P Prototype (4 modules)" in dmesg and no apparent errors...yeah. Is "S400P

Hello, Over the past several weeks, we have been having an intermittant problem with our deployment of a TDM400P card (4 fxo). ?We have tried many things, and the problem still re-occurs. The Problem: Occasionally (every 48 hours), the TDM400p card will stop answering incoming calls on ALL fxo ports. ?Attempts to send outbound calls on any Zap channel will result in hearing a loud

Hi all, I was excited to see the announcement on the list regarding the fix for the echo problems on Digium FXO cards! I have 2 X101P's, TDM400P with 4 FXS modules and couple of XLite softphones. A few months back,I had gone thru the recommendation on the list to remove echo from the SIP phones(I never did have any echo on the TDM400P FXS phones), and had removed about 90% of the echo.

I think I have a bad FXS module on my TDM400P. Channel map: >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> Channel 02: FXS Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) The zaptel loads ok, but the wctdm reports No such device or address and stays loaded. The

Hi Folks, Does anybody have experiences with plugging 3 TDM400P cards in one PC?? I think about a Asterisk box handling 8 incoming analogue lines and providing 4 lines to an old analogue PBX. I read a lot about trouble with the TDM400P cards so this idea seams to be not really god, or? Ciao Joerg -- _____________________ Don't PANIC

Hi All, I'm attempting to use two X100P cards and one TDM400P card. What driver do I load for the TDM400P? Is their any documentation for this card yet? Also, I know this has come up before but I can't seem to find it in the archieve... how do I configure the second X100P card? Anyone have a working sample? Thanks in advance, Randy

Hi- I'm totally stumped configuring my TDM400P with one FXS and one FXO module. Before I got the FXO module, I used to have an X101P, and everything was working very well. Now * doesn't seem to recognize the FXO channel. I've searched the wiki and the list archives. Stock Debian 3.0 stable installation. Any advice? Thanks. -- David Here's my configuration: modprobe zaptel

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was