similar to: SuSE SLES rebuild project??

Hi all, I installed SLES 10.0b3 with XEN on some test-systems and created a SLES 10.0b3-image for use with domU''s. The installation and booting of this domU was no problem, but on some systems the host dom0 restarts if I generate some IP-traffic from the guest. This happens on an old AMD Athlon 1,3GHz, an old Intel P3 and an Intel desktop with P4 HT/VT/EM64T but not on an Intel

Hi, I need to do a test with SLES 9 running in a domU very quickly and don''t have much time. Is there anybody out there having experience in installing SLES 9 into a domU? Or way better, maybe has a already running guest installation for download? Thanks in advance, Michael -- ---------------------------------------------------------------------------------------- Michael Mey     

I'm having some problems with ocfs2 and Suse 9.2. The documentation for ocfs2 says it comes with Suse 9.2. I've installed Suse and used YAST to get to SP2. # SPident -vv Summary (using 612 packages) Product/ServicePack conflict match update (shipped) SLES-9-x86_64 0 0% 293 47.9% 44 (1597 18.3%) SLES-9-x86_64-SP1 0 0% 110

Hello everyone, I''m totally new to Xen and trying to run it on some platforms (x86, x64) using SLES (that is what I have to use for reasons other than technical). Several machines on which I tried using Xen simply fails to run normally using Xen kernel: either network communication is not functioning at all despite proper configuration (that works on non-Xen kernel), or the kernel

Hello, Whenever copying files using ssh (scp) from SLES 8 (openssh 3.4p1-263) to another box (e.g SLES 8, Solaris 8, Windows XP), the memory of the initial SLES 8 box gets depleted. To make sure this is true I use the free command whilst copying and see that the used memory reaches 90 / 100%. After the copying is finished this memory is never released. No memory tool can tell me what happened

Good day, configuration: - HP Blade Server Proliant 460C + disk array HP EVA 4000 - SUSE SLES 10 - OCFS2 file system File system device - I use linux df with this result now: /dev/sda1 5240048 1K-blocks 42838768 Used 9581280 Available 82% Use /dlf1 Mounted on ...... Yesterday I had problem with copy files on disk /dlf1 - Error: "There is not enough space on the destination", but linux

All, This is a fresh, un-f#$ked-with OpenSUSE install after adding the Tumbleweed repository and doing a dup. I installed the Hypervisor with Tools for which it prompted me for Xen or QEMU and I chose Xen. No bridge was made. When I go to create a fully virtualised machine, it nao has the error: Error: Device 0 (vif) could not be connected. Could not find the bridge, and none was specified.

Has anyone had any problems building on SuSE SLES 8 for s390 with all patches applied... After applying patches to my build server last night, building samba fails with the following... mycomp:/srv/build/samba-3.0.2a/source # make Using FLAGS = -O -I./popt -Iinclude -I/srv/build/samba-3.0.2a/source/include -I /srv/build/samba-3.0.2a/source/ubiqx -I/srv/build/samba-3.0.2a/source/smbwrapper -I.

We want to join out Linux-Server: SLES 10 SP1 x86 with Samba (samba-client-3.0.24-2.23) to our W2000 Domain. so i use the command: net join -S TQ-NET.DE -UAdministrator and i get the following Errormessage: Failed to join domain! ADS join did not work, falling back to RPC... [2008/03/12 12:07:29, 0] utils/net_rpc_join.c:net_rpc_join_newstyle(350) Error in domain join verification

Hi all, I'm having some difficulty configuring Samba correctly. Something I've noticed is that changes I make to Samba config through YAST aren't being retained in smb.conf. The smb.conf timestamp appears to change ... but that is all. Can anyone suggest what the problem could be? Does this mean I'll have to use command line configuration? Greg Shearer Greg Shearer - Senior

Hi, I have SLES 10 running (after much searching, reloading, and trial and error) a Samba PDC with LDAP. I have tried to use the many Samba as PDC documents out there, but none seemed to work. I even tried one from the Suse Site geared for SLES 10, no luck. I ended up using Yast2 to configure the server and get it running. It is accepting workstations, and user connections with one problem.

The "sles" distribution string in libguestfs represents both SLES and SLED, so map the osinfo descriptions of "sled" distributions as "sles". --- src/osinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/osinfo.c b/src/osinfo.c index 907580e..7fdaf1c 100644 --- a/src/osinfo.c +++ b/src/osinfo.c @@ -625,7 +625,7 @@ parse_distro (guestfs_h

Hi, I have the following Problem: My Rootserver stands at a hoster, I run a debian sarge and installed Xen 3 there latetly. I booted the xen Kernel - everything ok. However: when I started xend, the server instantly stopped responding. My Hosters Support said, that was due to a sort of mac spoofing protection in the switch, which disabled the Port, to which my server is connected, because there

Hi all, Just curious, Quite a while a go, i was checking for supported SW-platform. AFAIR, it was RHES and SLES Now it's only RHES-4 and FC-3 or FC-4. Not a single syllable about CentOS or SLES-9 or SLES-10 It probably just runs fine, but any chance of getting support for their *-enterprise version? (just in case of, if one needs it) Hans -- pgp-id: 926EBB12 pgp-fingerprint: BE97 1CBF

Hi all, I've just recently carried out 2 clean installs of SUSE SLES 10 (SUSE Linux Enterprise Server 10 (i586) - Kernel 2.6.16.21-0.8-smp (0)) and have found on both occasions that the YAST configuration tool for SAMBA in this release is broken. Initial configuration seems to be OK, but whenever subsequent changes are made they are not reflected in smb.conf. Just a little frustrating!

It needs to check for the minor version, not major version. Fixes commit a442d2c3217f709128f0e377f88649fb6ba90f45. --- builder/repository_main.ml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/builder/repository_main.ml b/builder/repository_main.ml index bb440563b..9932fbae4 100644 --- a/builder/repository_main.ml +++ b/builder/repository_main.ml @@ -178,7 +178,7 @@ let

Hi, I'm trying to setup some servers with Samba and Winbind. One of the servers are both a Samba server and a NFS server so I want to have the same ID:s on the files that I export with NFS. All users are all in one AD domain. The problem is that the Samba/NFS server are running SLES 10 and the others are running FreeBSD 6.2 and they get different UID:s and GID:s. All the FreeBSD servers are

I compile Samba for the first time on LINUX (SLES 10) and have a weird libpthread warning message. I dug the list to find some explanations about the way I have to handle this problem, without success. Below are the 'configure' parameters and the part of config.log about libpthread. Is there a way to not link libpthread to avoid this performance degradation ? What must I do with this

I currently manage approximately 150 hosts with a handful of ZLM policies, but I''ve had one too many policies lost by the management server to keep using this solution. I''m wondering if anyone has any experiences (good or bad) they''d be willing to share specific to using Puppet with SLES (9 and 10). What experiences have you had with package management tools? Would

Hey guys, I'm having trouble with PRIx64 and buddies in the X86 target on SLES 11. After searching, my issue seems like a generic problem with PRI support on different OS's. Here's a decent description of my problem: http://gcc.gnu.org/ml/gcc-help/2006-10/msg00221.html Any suggested methods to correct for <inttypes.h> not having the proper macros defined (besides defining