similar to: Incoming Calls causing Protocol Error (6)

Hi * :-) I found in the online WiKi docs some information on how to integrate Asterisk with "old PBX"... http://www.voip-info.org/wiki-Asterisk+legacy+integration ...but I couldn't find anything on integration with a Siemens HiCom 150E. Later on we'll migrate to a HiPath 3750 so information covering this model would be nice too... Do you know if any of the PBX listed

Hi Stephen, You said that PRI works great. We are using HiPath 3550 and Siemens digital phone which using *11, *97 etc for function keys. However Asterisk uses the the * key plus one or two digits for function keys as well(it is common key combination for functions). So is it any way to disable *11, *97 keys in HiPath system and pass this keys to Asterisk? Thanks and regards, Isaac >Hi

Hi, I recently configured Linux HA for Asterisk service (using Asterisk resource agent downloaded from link: https://github.com/ClusterLabs/resource-agents/blob/master/heartbeat/asterisk ). As per configuration it is working good but when I include "monitor_sipuri=" sip:42 at 10.3.152.103" " parameter in primitive section it is giving me an errors like listed below; root at

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been struggling with an ongoing problem the last month. Here is the layout of the wiring: T1 from ISP > DiTech Echo Cancel device > Voice Channel-Bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1 server zap card > fax channel bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1

Hello, I need help for that error message: ?chan_sip.c:14889 handle_response_invite: Failed to authenticate on INVITE to? My network is: Client1-- -----------asterisk1------asterisk2 Client2-- ? With client1, I do a call ? Asterisk1 forward the call to asterisk2 ? Asterisk2 forward the call to asterisk1 ? Asterisk1 forward the call to

Hi all. Ive recently setup two Asterisk boxes (running Asterisk@Home to be specific), and Im trying to get a trunk going between them. So far I have tried a combination of IAX and SIP configuring them through AMP and writing the config files manually, but I cant seem to get calls going between the two. I have named each box asterisk1 and asterisk2. Does anyone have some working SIP and/or IAX

Hello, My network is: Client_SS7_1-- -----------asterisk1------asterisk2 Client_SS7_2-- ? I receive a fax from Client_SS7_1 ? Asterisk1 forward the call to asterisk2 ? Asterisk2 forward the call to asterisk1 ? Then, asterisk2 forward the fax to Client_SS7_2 I want that the SIP signaling go to asterisk2, But, I need that the RTP don?t go

Hello, I've got a test setup with 2 asterisk boxes: Asterisk1 with: asterisk 11.5.1 dahdi 2.7.0.1 Digium TDM400 with 2 FXO ports Asterisk2 with: asterisk 11.5.1 dahdi 2.7.0 Digium TDM400 with 2 FXS ports Asterisk1 has the following AEL Dialplan: context remote { s => { Answer(); Dial(DAHDI/g1/7005); }; }; When a call from Asterisk2 comes in, it is correctly

Hi, I have 2 Asterisk systems and a unique scenario where I need to play a particular tone on Asterisk1 and identify the same tone on Asterisk2. Following is my call flow, Asterisk1(Plays audiofile1,Wait for 2 Sec,Plays a tone,Plays audiofile2) -> PSTN -> 3rd Party CONFERENCE SYSTEM <- PSTN <- Asterisk2(Record audiofile1,Wait for a tone,Record audiofile2). A few points to keep in

Hi!I've a question: I've 2 asterisk, I want pull the ethernet wire and then reconnect it after 5 second, using the VRRP protocol, where must I set the IP for the connection goes on the second asterisk? I want this: I call to asterisk1, then I pull the ethernet wire down, vrrp makes up the other asterisk but not the audio streaming...the callers are always pointed to asterisk1, but for the

Hi I am trying to make this setup work phone1---g729---asterisk1---sip---asterisk2---g729---phone2 I have tried several configurations but none worked I keep getting transcoding errors I have installed one g729 licence on each asterisk, but I can't verifiy because the show g729 command is not available, I use 1.2.17 Do I need 2 g729 licences per asterisk ? Do I need to register

Hi all, I need to test the following scenario: +-----------+ +-----------+ | asterisk 1| | asterisk 2| +-----------+ +-----------+ | | | | _______|__________________|___________ | | | | | | +-------+ +-------+ | ATA 1 |

Hi all I wonder how to solve this issue: Asterisk1: 2 BRI Cards, TE and NT Mode. - ISDN In (From telco) - ISDN out (to a phone) (Zap/g6) exten => 999999,1,Dial(IAX2/key@asterisk2/999999&Zap/g6/999999) Asterisk2: Just different kind of SIP Connections. exten => 999999,1,Dial(SIP/999999,20,r) exten => 999999,n,Voicemail(u999999) exten => 999999,n,Hangup Now when a call commes

Hi, I have the following situation: At a branch , there is a Cisco Call Manager with users all having Cisco phones. Now I put down a Asterisk 1.2.12 box at the branch, which talks H323 via chan_oh323 to the CCM. So calls go from the CCM, go H323 to the local Asterisk box, then I take it via SIP to another Asterisk box. From there I am hooked up to 2 different providers, for Local and

Hi, I am faced with this dilema of asterisk not sending an ACK after it receives 200 OK from OpenSER (which is a response to a reinvite request sent by asterisk. Here is my setup Carrier<->OpenSER<->Asterisk1<->Asterisk2 A user is connected with Asterisk1 (through the carrier and OpenSER). On certain dtmf events the call is forwarded to Asterisk2 using the Dial command.

Hi all, saw a few messages here, and read the part on the wiki on using asterisk to dial out via another SIP service provider, who incidently is also using Asterisk. First the details; PHONE1 Extension: 2002002001 IP Address: 192.168.128.25 ASTERISK1 Extension: 1111111111 IP Address: ASTERISK1 ASTERISK2 IP Address: ASTERISK2 Destination PSTN Extension: 2222222222 (Information changed

Hi, My configuration is SipPhone<----->asterisk1 <----->asterisk2. My asterisk version is 1.2.10. I installed chan_h323 according to 'http://astrecipes.net/?n=102'. When i call from asterisk1 to asterisk2, there is no audio. Using 'rtp debug', I can see that rtp packets are being received. Regards, Jason. #------h323.conf for both------------------------ [general]

Hi Group, I am currently facing a dead end and any help will be much appreciated. I have an a104d installed in an asterisk box, two of which is configured on ISDN pri. One is facing pstn and the other one is facing a hipath 300e Siemens. I am getting one way audio when a local on the hipath tries to make a pstn call but no issue on incoming calls from pstn going to the hipath locals. local

I am testing Fax for Asterisk. But, I meet a problem. I try to Send a Fax (.tiff) from the first asterisk (Asterisk1) to the second asterisk (Asterisk2). Asterisk1 initiates an INVITE with audio G.711. Asterisk2 accepts this INVITE. Immediately, Asterisk2 sends an re-INVITE with T.38 to Asterisk1. But, Asterisk1 responds with "488 not acceptable here". I double check t38pt_udptl = yes in

Hi, I need some information on DID and Callback. Please read-on: Question on DID (User1 Calling User2 via normal Telephone line and sending its CLI: Connectivity is as below: User1 ==PSTN==> DigiumE1/Asterisk1 ==INTERNET==> DigiumE1/Asterisk2 ==PSTN==> User2 1. Can User1 make a single stage call to User2 via Asterisk1? Currently User1 is able call User2 on Two Stage basis (Asterisk