similar to: Connecting two asterisk servers using IAX

I originally wanted to answer with something ... tzarit and kevit Readed probably before you invent rapid biz. I am asking to share any info /experience not your high spirit. Thanks for less trivial answer, G >On Wed, Oct 05, 2005 at 12:44:27PM -0700, Thameem Ansari wrote: >> I am using the inter asterisk trunking and the article in >> voip-info.org<http://voip-info.org>will

Hello, I'm a newbie to the asterisk system. I'm trying to configure a dialplan so that when I use my IAXy it will prompt me with an IVR and then send me off to different things like dial and voicemail from that. I've tried various combinations but I can't seem to get it to work properly. Here is an example: [default] exten => s,1,Answer exten => s,2,Ringing It gives me

FYI from my putting SVN-trunk briefly into production for stress-testing. Fresh checkouts from the last two days, most recently SVN-trunk-r30465, begin to show lots of errors like those appended below, after about an hour of operation. > May 26 00:29:51 NOTICE[4418]: chan_iax2.c:5001 register_verify: No registration for peer 'hackley' (from 10.17.1.2) > May 26 00:30:41

Hi Ray, I was wondering if the "qualify" option is used [in sip.conf] to keep a connection (from the SIP phone inside the firewall to the Asterisk server outside the firewall) open then would the firewall not allow two way communication without incoming port mapping/NAT (providing that the SIP phone started "talking" first)? I'm not sure about that - I'm being

Hello Folks; Again, excuse my cluelessness. I have an Asterisk server in the US - and I want to connect it to one in Europe. Here is my scenario: 1. call a phone number, my Asterisk box in the US answers 2. perhaps a 'please wait' voice message 3. it dials an extension on the other Asterisk box in Europe. I am not looking for someone to do this for me, I am just not really

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default]

Hello, I'm pretty new to asterisk (only been fighting with it on and off for about the last month), so please go easy. I've been wrestling with the documentation, forum posts, google, and my lack of telephony and VOIP knowledge, trying to get my setup to work. My current problem has me stumped saying, "There's gotta be a cleaner way to do this." Please show me the light

Hi.... I'm having a extrange problem.... I cant register with Iaxtel or call to digium... But i cant make or recive IAX calls... ( I made some one with irc users ) Any idea why? At my logs i have this from iaxtel: NOTICE[196621]: File chan_iax2.c, Line 2832 (register_verify): No registration for peer 'xmarts' (from 192.168.0.11) NOTICE[196621]: File chan_iax2.c, Line 4389

Hi everyone, I decided to have a look at SIP & NAT again and I've been at it for a [quite a] few hours but typically nothing is working for me. Actually I'm not sure if SIP and NAT can ever work but some emails on this list do suggest that someone has got it working, once, maybe. I'm experimenting with a ZyXEL 2000W [WiFi Sip phone] which supports "Outbound Proxy",

Hello, I'm trying to conect two 1.6.2.13 Asterisk server with IAX. This is my configuration: Asterisk A: iax.conf register => coiax:pass1 at 69.164.207.166 [smiax] type=friend host=dynamic trunk=yes secret=pass2 context=phones deny=0.0.0.0/0.0.0.0 permit=69.164.207.166/255.255.255.255 qualify=yes Console: iax2 registry 69.164.207.166:4569 N coiax 69.164.197.105:4569

Hi all, I've 2 * tryning to connect each other Server A is already registred on server B But server B never registers in server A I always get this: Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGREJ Timestamp: 00018ms SCall: 00004 DCall: 00003 [XXX.XXX.XXX.XX:4569] CAUSE : Registration Refused CAUSE CODE : 29 Any tip? Best regards, Marco Mouta

Dear Sanjay, Sorry sanjay i miss to explain completely. My PC2PC mean is Dialer2Dialer i want to allow call between Dialer with out any registry and authentication through IAX. so i need to setup Asterisk accept calls from any user and users can call to each other without any password and registration. please help how can i configure Asterisk using IAX in this regards. thanks, Asif Message: 9

Hi everyone, I want to call from one Asterisk to another Asterisk via SIP, but i dn't know how. I have found out something in these links: http://www.voip-info.org/wiki/index.php?page=Asterisk+config+sip.conf http://www.voip-info.org/tiki-index.php?page=Asterisk%20SIP%20Channels but I don't understand them very well. At first, I tried simply doing this: In SIP Client:

Adam, I thought Andrew Kohlsmith gave the individual good advice without intentionally malaciously spitting in the guys face. For the question, " 'Whats the ' Minimum CPU required for 60 calls? " I think a Pentium 3, high end, which is cheap right now, should do fine, but you will need either 3 T-1s or arrange for the calls to come in via SIP, but you will still need more

Ok I have an * server finally setup and acepting calls from freshtel and I am VERY impressed at how well the Freshtel.net service works but thats another subject :) I have it all setup so that I can Dial my DID number on freshtel and that gets set to my * via IAX. At the moment I have the demo configured so that I can test it all and make sure it is all working. The problem is that I

I tried to connect my * to IAXtel, but i always get this errors. chan_iax2.c:5849 socket_read: Registration of 'mnetwork' rejected: Registration Refused On dial a iax number i get: chan_iax2.c:5526 socket_read: Call rejected by 69.73.19.178: No authority found chan_iax2.c:5528 socket_read: Immediately destroying 3, having received reject chan_iax2.c:2411 iax2_hangup: We're hanging

Trying now to set up the final part of my * switch. I must admit I've had great fun over the last week or so playing with it, and would like to thank you guys for all the assistance (past and present, since I've been trawling a lot of old posts!!!). Scenario - using voiptalk.org to supply the incoming gateway, tied to an 0845 number for convenience in testing. Internal 7960 -> 7960

Hi My first post get no answer :=<, i post new with new elements. I have two Asterisk server, running on Asterisk 1.6: SRV1 = 192.168.0.5 on Asterisk 1.6.1.4 SRV2 = 192.168.0.20 on Asterisk 1.6.1.8 I want create a link for exchange call. on Srv1: iax.conf: [general] bindport=4569 bindaddr=0.0.0.0 language=fr bandwidth=low jitterbuffer=no forcejitterbuffer=no autokill=yes

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default] exten=>_.,1,Dial(IAX2/${EXTEN})