similar to: mISDN, HFC, W6692, one-way-voice problem

Thanks for suggetions and keep me indumb about making of Debian packages:D I will try this package "nut_2.2.0-2_i386.deb" One little questionm, shoud I use newmge-shut driver? - my ups is quite old - more then 3 years, connected through serial cable. >> PS: Arjen de Korte suspected something was wrong around my "heater" load, >> for now I have used two 150W lamps

Hi all, I'm trying to share a directory that contains files with non-ASCII characters (actually, hungarian chars, iso8859-2 or utf8 encoding, I'm not sure - the encoding of ext2) in their name. When I mount the share and try to list the contents of the directory, smbd crashes. samba version: 3.0.0rc1 The shared dir is on an ext2 partition. My system is a debian woody. iconv is installed

Hi, I have network in my office with Samba server on Debian Linux. I would like to get the folders and files in this server from my home with Windows XP. So, I done the VPN connection. I think, it works good. In the VPN connection Samba Server's ip address is 192.168.2.1 and net mask is 255.255.255.255. The client's ip address is 192.168.2.6. and netmask is 255.255.255.252. I can

Hi, we have a Samba 3.0.24 server on a Fedora Core 5 system and we use it as PDC. I have client machines with Windows XP SP2. What I want: - some machines (for example machine1) should be used only by user1 and user2 - allow user3 to use ONLY some machines (for example machine2) I tried the following: [global] include = /etc/samba/smb.conf.%m invalid users = user3 here's the

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

HI: Is there any way to raise up sound volume on fxo on TDM04B without changing tx-gain and rx-gain ? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hi!! Somebody knows why throws me an exception?? invalid date C:/Ruby/lib/ruby/1.8/date.rb:1482:in `civil'' C:/Ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.4/lib/active_support/ core_ext/string/conversions.rb:23:in `to_datetime'' C:/Ruby/lib/ruby/gems/1.8/gems/soap4r-1.5.8/lib/xsd/datatypes.rb: 579:in `screen_data''

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

I have a ISDN BRI card with hisax module (w6692) and there is a lot of echo when I make calls to outside. Between the sip softphones the echo doesn't exist, but when I call to outside through the ISDN the echo exist. Is there any sense to put echocancellation in modem.conf ? ___________________________________________________ Nueva tecnología de Yahoo! Búsquedas ¿te atreves a comparar?

I can't find solution anywhere. I googled and find people with the same problem but there was no answers on how to fix this. I have W6692 based PCI cards that uses hisax driver (card type=36). Card is working fine under asterisk with i4l modem driver for incoming calls. If I want to dial out using some sip phone I don't get ring indication. Phone is ringing and I hear only silence until

Hi all I've only been working with Asterisk for a matter of days but have already grown into a big fan =) Much as I've managed to get internal calling working fine, I have a configuration running on an old PII-233 on RH9 with a (although not badged as is a) Dynalink IS64PH/Winbond W6692 PCI Card as /dev/ttyI0. The card works fine in minitel and dials out without a problem.. However try

Hello It is all very confusing due to little information available :) I have a w6692 PCI card, so 1) What ports or modes i can use it? Currently i am plugged into a T0 port, can it be used? And what's the difference from S0? Please point me to some reading full of clues. 2) Due to lack of my understanding of the modes i can't seem to get the right protocol and layermask values for

Has anyone got chan_misdn working with passive BRI cards yet? I've tried both hfc (hfcpci.ko) and w6692 (w6692pci.ko) cards, but when I start asterisk I get the following when chan_misdn is loaded: [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found == Registered channel type 'mISDN' (This driver enables the

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

Dear RRRRRrrrrrrrrlist! I?ve got two lists which contain sets of DNA-sequences. They look something like this: List of 33 $ Cunonia_atrorubens : chr [1:247] "t" "t" "n" "t" ... $ Cunonia_balansae : chr [1:254] "t" "c" "c" "c" ... $ Cunonia_capensis : chr

There are ~4300 uses of pr_warn and ~250 uses of the older pr_warning in the kernel source tree. Make the use of pr_warn consistent across all kernel files. This excludes all files in tools/ as there is a separate define pr_warning for that directory tree and pr_warn is not used in tools/. Done with 'sed s/\bpr_warning\b/pr_warn/' and some emacsing. Miscellanea: o Coalesce formats and

There are ~4300 uses of pr_warn and ~250 uses of the older pr_warning in the kernel source tree. Make the use of pr_warn consistent across all kernel files. This excludes all files in tools/ as there is a separate define pr_warning for that directory tree and pr_warn is not used in tools/. Done with 'sed s/\bpr_warning\b/pr_warn/' and some emacsing. Miscellanea: o Coalesce formats and

There are ~4300 uses of pr_warn and ~250 uses of the older pr_warning in the kernel source tree. Make the use of pr_warn consistent across all kernel files. This excludes all files in tools/ as there is a separate define pr_warning for that directory tree and pr_warn is not used in tools/. Done with 'sed s/\bpr_warning\b/pr_warn/' and some emacsing. Miscellanea: o Coalesce formats and

Hello list. I'm trying to rebuild the 2.6.9.67.0.20.EL kernel, but it fails even without modifications. How did I try it? Created a (non-root) build environment (not a mock ) Installed the kernel.scr.rpm and did a rpmbuild -ba --target=`uname -m` kernel-2.6.spec 2> prep-err.log | tee prep-out.log The build failed at the end: Processing files: kernel-xenU-devel-2.6.9-67.0.20.EL Checking

Hi All, I've been using NoiseNinja 2.10 (http://www.picturecode.com/nn_standalone.htm) on Linux (Debian unstable, kernel 2.6.11) using wine. It used to work fine, then Debian updated their packages, and wine broke (that's the price I pay for using Debian unstable, I guess). I then found out packages were also available from winehq.org. I've added them to my system as described