similar to: Empty ACK

Hello, I have a problem with the following: When I dial a PSTN number from a UAC, the call is made through a SIP Trunk (which has a connection to the PSTN) in Asterisk. The PSTN Gateway returns a 100 Ringing WITH SDP, but Asterisk forwards the 100 Ringing WITHOUT SDP: As you can see below, the SIP message from 10.254.254.1 (the PSTN Gateway) has SDP, while * (with 192.168.0.173) removes the SDP

Hello, I have a problem with the following: When I dial a PSTN number from a UAC, the call is made through a SIP Trunk (which has a connection to the PSTN) in Asterisk. The PSTN Gateway returns a 180 Ringing WITH SDP, but Asterisk forwards the 100 Ringing WITHOUT SDP: As you can see below, the SIP message from 10.254.254.1 (the PSTN Gateway) has SDP, while * (with 192.168.0.173) removes the SDP

Hello I'm working on my RIS server; I got a problem when I use pxelinux.0 to load setupldr.exe from windows XP 32bits (both home and corporate) Here is how I configure a working server, then how to modify it to reproduce the bug: ========================= I suppose you got -a dhcp server configured to load pxelinux.0 to client computer. -a working tftp server (mine is tftpd-hpa, with a rule

Rowland, You're absolutely right - with '128' both DHCP servers listen and *may* reply, therefore besides failover provide load balancing. Even if both servers respond with *Offers* to the client, the client will select one and issue *one Request* to the selected server. E.g., below is a log records from my failover DHCP (192.168.0.2) server: May 17 00:09:37 s-dhcpd-2 dhcpd[1578]:

On 21/05/2020 21:04, Matt Savin wrote: > I think you can continue to use '128' (good for load balancing, > otherwise 255 is fine). I had the same issue, following dhcpd.conf > entries fixed it (the last entry is important): > > one-lease-per-client? true; > deny ? ? ? ? ? ? ? ? ? ? ? ?? duplicates; > ignore-client-uids ? ?? true; > > And it's not a bug,

Tim Legge has passed the following message on to me: hpa wrote: > Quinn wrote: > > Now it seems I have found a bug in PXELINUX with regards to etherboot. > > Up until 2.07 pxelinux was responsive to the keyboard. From 2.08 and > > up the keyboard is locked at the boot prompt when pxelinux is loaded > > via etherboot 5.3.14. > > That would not be a PXELINUX bug,

I have a kickstart file that basically runs the following: install nfs --server=nfserver.blah.local --dir=/vol/updts/staging/CentOS_4.3 #include %some_file.cfg I want to be able to access or "include" a file on the nfs share not the local CDROM I've got this on. How do I do that? === Al

On 10/06/2019 06:16, Tom?? Havl?n via samba wrote: > Good morning, > I have tried upgrade SAMBA to version 4.10.4 and my error still > exists. New created file has mask limited perrmisions if VFS:recycle > module is activated for share. If module is off, rights for new files > works corectly. I have it on 3 servers with Samba 4.10 and 4.9, one > server withj 4.8 works

On 10/06/2019 08:51, Tom?? Havl?n wrote: > Hello > my smb.conf + working and no working ACL share folders > > [global] > netbios name = FENIX > realm = PFCZ.INTRA > server role = active directory domain controller > workgroup = PFCZ > idmap_ldb:use rfc2307 = yes > dns forwarder = 10.254.254.1 > > unix extensions = no > wide links = yes > follow symlinks =

I finally got Solaris to successfully make asterisk, using these instructions: http://sunfreeware.com/programlistsparc10.html#gcc33 Now though, when I issue the make install, I get this error: mkdir -p /var/opt/asterisk/spool/system mkdir -p /var/opt/asterisk/spool/tmp mkdir -p /var/opt/asterisk/spool/meetme install -m 755 asterisk /opt/asterisk/usr/sbin/ install: asterisk was not found

I have two sites running Asterisk PBX. Normally the inbound calls go through a 3rd (colocated) server and are routed via IAX to the site (the site registers with the main server) I created a macro that tries to ring one location and then another. Each site explicitly Answer() the call even though it will only ring all the sip phones at the relevant location. When fall back is in effect it goes to

I had similiar issue on samba 4.8 domain member (new files with wrong permissions), when I realised that You need to list all modules that You wish to use in "vfs objects" every time , there is no inheritance from global -> shares that is if You have e.g. [global] ... vfs object = acl_xattr .. [some share] ... vfs object = recycle .. On samba DC "acl_xattr" is

Dear All, Yesterday evening or cluster has stopped. Two of our nodes tried to take the resource from each other, they haven''t seen the other side, if I saw well. I stopped heartbeat, resources, start it again, and back to online, worked fine. This morning I saw this in logs: Feb 22 03:25:07 node4 kernel: Lustre: 7:0:(linux-debug.c:98:libcfs_run_upcall()) Invoked LNET upcall

Hello Samba List, I am struggling with connecting samba to our AD servers. Thought it will be easy as before but I was wrong. DCs: Windows Server 2012 (2x) with AD Domain Forest/Level 2003 NATIVE. + SBS 2003 (will be removed, migrating from SBS AD to new 2012 servers) -standard AD schema with exchange attributes DID NOT INSTALL UNIX attributes. This is required for SSSD. Thought i would go

Hi All, Looking for some guidance on debugging and also reporting a bug. First off I can't seem to find any information on reproducing the ubuntu 16.04 build with debug symbols, I do have a core file I'd like to introspect to potentially provide a patch. Secondly the bug report itself: I am receiving a segfault signal 11 when one or more machines share a *Address* specific IP. For

Hi all, I''m searching for a tutorial how to setup multiple network cards with xen network bridge setup in debian lenny. My problem is, bridges seams only to work if i put an ip adress in dom0 to them. Thanks, Alex _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello my smb.conf + working and no working ACL share folders [global] netbios name = FENIX realm = PFCZ.INTRA server role = active directory domain controller workgroup = PFCZ idmap_ldb:use rfc2307 = yes dns forwarder = 10.254.254.1 unix extensions = no wide links = yes follow symlinks = yes bind interfaces only = yes interfaces = lo eno1 max log size = 150000 [netlogon] path =

Hello, I am running FreeBSD 4.0 and Samba version 2.0.4b. I am trying get my smbpasswd+samba password to synchronize. At this point when I run smbpasswd <user> as root it will change the samba password and update the UNIX password as well. Problem is, that a user running smbpasswd at his shell prompt or using Passwords (from Control Panel) will not change the smbpassword and not update the

In the fact, I don't undestand. I have no problem with deleted files, and I have 700 on .deleted folder because I don't need to have users be able to open deleted folder with deleted files, it is only for me. If VFS:recycle is enabled, new created files on share folder (not .deleted folder, not deleted files) permission to this folder are limited by mask and owner is "root".