similar to: IAXPhone

Hi Did someone know how I can use two AVM FritzCards USB V2.1 in an asterisk box? I know how I can use 2 PCI but it's not the same thing for the USB one. Thanks! _____________________________________________ Erwan Desvergnes - ANDIUM - 82/86 rue Ch?teau Gaillard 69100 Villeurbanne Tel. 04 37 43 44 45 / Fax 04 37 43 44 44 E-mail: erwan.desvergnes@andium.fr

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

We've bought the G729 codec for lowering SIP bandwidth usage (we're using grandstream phones) and we're quite happy with it up until I tried using IAXPhone 0.2.0 build 116 with my asterisk 1.0.0 installations. Weirdly enough, calls from IAXphone to the GS phone work just fine. So are calls from both phones to voicemail. And from both phones to analog phones connected to FXS ports.

Hi, if I change Iaxphone settings to qualify=yes it says it's unreachable. Can iax2 clients be monitored with qualify option ? Is this problem related to iaxphone ? Anyone sucessfully using iax qualify feature ? Regards, Rob.

Hi, does anybody know if there's a iax phone running on ubuntu 5.10 which can be used with asterisk? Seems like kiax has got many compiling and libraries problems. TIA Giorgio Incantalupo

Hi, I'm trying to set up two ACT SIP/IAX capable phones to communicate with each other on the same internal network, using asterisk 1.0.9 on SuSE 9.3 (because I intend to grow the situation after this basic setup is functioning) The phone IPs are set to 192.168.0.201 and 202 respectively. I've had a look at iax.conf and extensions.conf but cannot see how to tie these IPs to an

We've bought the G729 codec for lowering SIP bandwidth usage (we're using grandstream phones) and we're quite happy with it up until I tried using IAXPhone 0.2.0 build 116 with my asterisk 1.0.0 installations. Weirdly enough, calls from IAXphone to the GS phone work just fine. So are calls from both phones to voicemail. And from both phones to analog phones connected to FXS ports.

Hi, I'm using IAXphone for remote users which limits me to the GSM codec. Internally I limit the SIP phones to iLBC codec (GS 101 1.0.5.0) I also use voiptalk.org for external PSTN access again using the iLBC codec. The problem I have is that when the IAXphone dials an internal phone or PSTN number either the line hangs up immediately or there is only one way audio from IAXphone. It works

Hello All, I have been looking for a commercial version of an IAX2 Softphone for Windows but the ones I have came across (i.e. Iaxcomm, Iaxphone, Diax) do not seem to have an updated version since April 2004 in some cases. We looked at Firefly but we sent emails to Virbiage/Freshtel with questions and could never get a response from them. Has anyone got any recommendations for commercial

I am using IAX soft clients (firefly, IAXComm, IAXPhone) from a Win2K machine on a NATed private LAN to connect to my IAXTel account. All of my calls to outside numbers(1-800, 1-877, etc) seem to be disconnected after 9 seconds. Has this limit been placed on IAXTel? My call to the echo test number at 1-700-999-9613 seemed to run for as long as I wanted. --

Howdy-- I'm playing with different IAX softphones. I've got DIAX and IAXPHONE on a windows (XP) machine on my network, and I'm running asterisk on a newly loaded Fedora Core 3 machine. I set up a separate IAX account for each phone. I was EXPECTING them to each register seperately with asterisk.... But I am swiftly finding out, that ONLY one registers. The first one to start

I've just installed mandriva 2006, I was using mandriva LE and wine-0.9.2-mdk under which terragen (http://www.planetside.co.uk/) ran pretty well and I registered the program which enables me to use various large terrain sizes. However with the 2006 install and wine-0.9.2-mdk whenever I try to load a terrain file (saved from terragen) with the large terrain size or change the setting to use

Hello, I am having horrible echo problems when using the FireFly client on both the caller and callee sides of the call. When I use another IAX soft client like IAXcomm or IAXPhone I do not have the same echo problems. Has anyone else experienced this and do you know what might be the problem? Thanks, dj -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have just install Asterisk software on my pc (PIII, 2Ghz, 512Mo, Linux 2.4.20 ) connected to a LAN (10 BaseT). I use on the users Pc (Xp windows) a client IAX Phone ( Sokol & Associates\IaxPhone). In my very good surprise all works correctly, but I have a little problem of sound quality: When I use the Voicemail the quality of sound is affected with a noise like "Scrrr"

Hi, I have strange problem. I have 1 SIP client (bt100) and 1 Iax2 client (IAXPhone): - when I call from Iax to SIP sound works - when I call from Sip to Iax sound doesn't work, I get : Jan 25 13:52:22 NOTICE[31334]: channel.c:1314 ast_read: Dropping incompatible voice frame on IAX2/200/1 of format gsm since our native format has changed to ulaw Why is Asterisk not satisfied with gsm

As a test, I was trying to use Iaxcomm and Iaxphone to connect to Asterisk and dial out to my other line. Using either of these soft phones, I can connect to Asterisk and listed to audio just fine. I can even connect across the net to another asterisk server and hear audio just fine, however, when I dial out to my second land line the audio that is transmitted is horribly broken up. It is as if

Announcing a new Windows-based IAX/IAX2 client. Please download it and give it a try. Let me know about any bugs, and any missing features. I have yet to come up with a catchy name for it, so at this point it calls itself IAX Phone. (Suggestions? Non-derogatory suggestions, preferably). Download: http://www.sokol-associates.com/Downloads/IaxPhone.zip Reference & Support Page:

I don't want to rain on Dan's parade, but I'd like to call everyone's attention to an existing project. Steve Kann has developed a crossplatform IAX/IAX2 library, and there are a few clients available for it. I have written iaxComm using the wx toolkit. It compiles and runs under Windows XP using the MinGW tool chain. A precompiled IAX only version is available at

I'm running Asterisk CVS-04/28/04-13:22:35 (fairly current) Today when I setup queues for the first time (with one member in my default queue), I got some really strange behaviour, aside from my hysterical laughing after hearing the default MOH =) I only have one SIP hardphone I'm testing with right now, so I tested using DIAX, Firefly(IAX) and XLite(SIP). My hardphone is an analog