similar to: Emergency Asterisk Guru help needed -- Yucky sound with MOH

911 Help! I accidentially deleted all directories under /var/spool/asterisk I did use the backup facility not too long ago but cannot find the process for restore. However, I don't believe a full restore is needed -- I just need to know the names of the directories under /var/spool/asterisk and re-create them (I hope!). Can some kind soul give me some direction or tell me the directory

Hello Would somebody be able to help me in explaining how to install a printer locallly and also using samba. I can see the printer icon on my laptop but printing does not work. Trying to print locally also fails but I am not to sure how to set up a printer and configure it correctly. Would very much appreciate some help if possible. Running redhat 7.1 Many thanks a enjoyable weekend Roland

Hi, Has anyone tried to use gnokii to send/receive SMS messages via serial or USB with AT commands while running Asterisk? Some of my calls have a "scratchy sound" once in a while. It doesn't seem to be due to packet loss but some kind of interference (CPU is ok, etc.). I've noticed some coincidence in time between this scratchy sound and the gnokii process. I have a bash

Dear All, I have move from the USA to Sydney, Australia. I have gone from a data center environment at work and cable at home to a 513k/128k ADSL line. I'm experiencing two issues; 1) There is a latency of .5 - .8 seconds between me and the USA. 2) I have been in two calls where my voice has been describes as 'Scratchy'? I'm using a SIP Phone from SJ Phone, and a Plantronics

I'm currently working out the config bugs on my * box and I'm noticing that the meetme is very scratchy. As in not usable scratchy tho I can hear the audio it sounds like when you talk through a fan. Anyone have any ideas? Linux 2.6 with RTC installed. Using stable release and SIP devices. -Don

> Hi there. > > > I'm trying to install samba 2.2.5 from source on solaris 2.5 sparc. It > compiles with no problems, and smbd + nmbd will run, and shares are > accessible. However, when I try to use smbpasswd to join the domain the > following occurs: > > smbpasswd -D 5 -j simpsons -r krusty -U administrator%myadminpasswordhere > > > provides the

Hi there.. I'm trying to install samba 2.2.5 from source on solaris 2.5 sparc. It compiles with no problems, and smbd + nmbd will run, and shares are accessible. However, when I try to use smbpasswd to join the domain the following occurs: smbpasswd -D 5 -j simpsons -r krusty -U administrator%myadminpasswordhere provides the following debug info: Initialising global parameters

Hi, it took me 2 days to get my asterisk box running, so now I completed and I am disappointed of the sound quality. When I call other people their voices sound somewhat scratchy. First I thought it might be a codec problem, but I also recognized it during the ring tone or even the DISA connect tone. Sometimes it is better quality and sometimes more scratchy. Where might be the problem? I am

Hi , Just discover a interesting way to connect ror developers locallly. http://www.citycita.org let groups of people who share same interests to plan events and meet offline in local communities around the world. The service is quite new but it seem to have an ROR Oslo community that use it - http://rubyonrails.citycita.org/22498/. Worth a look ! -- Posted via http://www.ruby-forum.com/.

I have a setup which allows users to access my asterisk box via FWD. That is, a user in say, France can call into a local access number for FWD, then hit number 7 which dumps them into a DISA request for a password, which then dumps them into my internal extension so they can dial out through a VOIP provider. Everything works fine until they enter their tones for the number they are calling

asterisk 1.4.35 dahdi 2.3.0.1+2.3.0 one span on a 4port T1 card Got complaints this morning that outbound and inbound calls were "scratchy" and I made a few test calls. It kind of sounds like the gain is too high somewhere, and the audio is overdriven. Is this a problem at the carrier? I'm trying to call them now, but it's Sunday morning in the sticks, and my chances of

Hi all We run an * 1.2.4 under FreeBSD with ztdummy kernel module. zttest reports 99.9something % of accuracy, so timing should be fine. SIP connections work fine, but we have a strange problem with IAX2 connections. When an IAX2 call originates from the FreeBSD Asterisk to another Asterisk, the sound is scratchy (sounds a bit like a 50Hz ground loop). It's not a problem of the

Dear LLVMers, I will be rebooting the LLVM server in 5 minutes (3:35 pm Central Time). The system is experiencing unusually high load, no other remedies have lowered the load, and we think a reboot will fix it. Please make sure any commits to the LLVM repository are done within the next 5 minutes. Thanks, and sorry for the inconvenience. -- John T.

So I have setup my samba box as a PDC and everything is working fine. There is one thing that keeps bugging me: When I run locallly: smbclient -L localhost -U% I get the following: ----------------------------- Domain=[MYDOMAIN] OS=[Unix] Server=[Samba 3.0.14a-2] Sharename Type Comment --------- ---- ------- IPC$ IPC IPC Service

Hi Ext3! I'm running about 30 dedicated MySQL machines under quite decent loads, and they are occassionally crashing. I've been logging console messages recently in an effort to find the cause, and some appear to be related to I perused your lists and found the message I'm replying to. If you don't mind, I've included messages and ksymoops from two crashes that I had

Hi, I'm experiencing a few (but meaningful) cases of audio distortion (or bad quality). I can't say yet how often this happens. Please listen to the following sound file: http://213.96.91.201/temp/distorted_audio_1.wav This was recorded by Asterisk while the local SIP caller was dialing out a SIP trunk (so the problem is on my side, definitely, and it doesn't seem to be related to

Since the irc channel wasn't any help, I will try posting my problem here. I have two TDM400Ps less than a week old in a PC. All of the FXS ports work fine, and all of the FXO ports worked fine up until thisafternoon. If I try to dial in, I get a busy signal, if I try to dial out, all I hear is a very scratchy, very crackly dialtone. If I swap the first FXO module with the second on the card,

Hello Folks, I noticed that all of the IaxClient based softphones with exception of Firefly only seem to have support for GSM but what about iLBC? The quality is excellent with iLBC even on a dialup connection! Meanwhile while the audio on GSM often sounds scratchy. Is anyone looking to implement iLBC in an IaxClient based softphone soon? Errol Biz4Web Solutions Limited

Hi, I'm sorry to bring this up again, but I have been googling forever and whatever solutions are offered don't work for me. I am using x-lite (the latest build) and trying to use Speex. When I do call from the x-lite to another SIP phone or PSTN (through Cisco gateway) My asterisk fills up with this message: WARNING[1007]: codec_speex.c:196 speextolin_framein: Out of buffer space The

Hi, I have an audio quality problem regarding IAX2. I have 2 Asterisk servers interconnected via 2 LAN trunks at 1Gbps (no nat, no firewall). One trunk is SIP and the other IAX2. Normally, I use IAX2 but have noticed easily reproducible audio quality problems (voice in/out is OK but there's a "third" noise overlapping with a "scratchy sound" as if it were some kind of