similar to: voicetronix openline4 comments

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Is anyone using the VoiceTronic Openline4 PCI (fxo) card? I am trying to setup Asterisk using a Digium 40B (4 port fxs) and an OpenLine4 (4 port fxo), however I can't find any examples or post that utilize this card. I have my stations (Sayson 390) ringing each other, but haven't had any success ringing out. I have the OpenLine4 loaded and all of the new drivers working good, just

Ron, VoiceTronix worked with me last week and backported the new chan_vpb that's in the current HEAD CVS tree to the 1.0 stable branch. So if you are using 0.7.2 or 0.9.0 you can go to the VoiceTronix website now (note that this is very new) and download an Asterisk package. When you download it there is an new chan_vpb.c that needs to be put in your asterisk source code tree. Also there

Hello, list, I am using Asterisk with an OpenLine4 card. It worked well with Asterisk 1.0. Then I upgraded the system, Asterisk 1.4 had some problem to compile chan_vpb, but I managed to compile it manually. Still Asterisk does not work because it refused to load chan_vpb module. I had to revert back to install Asterisk 1.2. Then I get a error: asterisk: hip.cpp:793:

Hi, I am using a voicetronix OpenLine4. I downloaded a recent asterisk CVS from voicetronix webpage but have had no luck to reduce echo on outgoing calls and for it not to crach on incoming calls. I dont think both problems are related though. Here is an output of what happens when a new call comes in and my voicetronix tries to pick it up and crashes asterisk: > vpb/1-1: Event

Hi all, Trying to get fax reception going using a voicetronix openline4 card, however, there are two issues (as far as I can see) (1) Currently the voicetronix world (cards, firmware, drivers, channel prog etc.) does not do fax tone detection. I have spoken to the voicetronix guys , understand what has to happen there and may do some hacking if I can resolve the second issue. Meanwhile, I

I'm looking to use Asterisk to replace my current PBX system. I'm in Australia so I need to use Austel approved equipment. My plan is roughly as follows: - Get a box with a suitable card and install Asterisk - Connect our existing PSTN lines to the Asterisk box - Get suitable softphones/ip phones to connect to the Asterisk system - Route all intra-office calls over our VPN - Route all

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

Hi I'd like to use asterisk with my VoiceTronix OpenLine4 board my board works fine (driver 2.4.0 on kernel 2.6.8) on my Mandrake 10.1 official linux box I installed Asterisk 1.0.6 and it starts without problems I'm new to Asterisk, so I don't know how to test Asterisk with my board..... I'd like to call my phone and have Asterisk to answer somethink like "Hi I'm

Hi all, Just thought I'd pass along some pointers when outdialing with Voicetronix's OpenLine4 card. I was having a tough time dialing out from *, it probably has something to do with chan_vpb.c not waiting to hear the dialtone before telling the card to dial. A quick fix was to insert a "," in the dialstring telling the card to pause before dialing. However when the

Any guidance on how to get my openline4 to get recognized by asterisk@home? I've got my vpb drivers running, but not sure how to add it as a trunk, should it be via zap? or is there another way? Thanks, Chuck

Before I start ... I know there's been a lot of talk over the last couple of days about the list being slow etc... I understand there were problems and that mail is starting to get through now. Just wondering - should I be surprised if something I sent 48 hours ago hasn't turned up at all? And something I sent about 6 hours ago still hasn't turned up (yet). I'm just curious

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

Hi there, I am trying to delay sending out DTMF from Voicetronix OpenLine4 to the CO line. The reason being is that Voicetronix sends out the DTMF too fast even before the line is fully established with the carrier. Usually when dialing an 8 digit number, only 7 digits are actually successfully heard by the carrier. Currently, my dial plan is: exten => _9.,1,Dial(vpb/1-1/${EXTEN:1}) Daniel

I'm sorry if this has been answered before. I seem to remember reading a similar thread a while back, but for the life of me I can't find it (after 30 minutes of intensive googling). I have a voicetronix openline 4 card in an * server running CVS HEAD as of 1st March. Everything is working pretty much as as expected (with a little more echo than zaptel?). The question I have is

Any one has documented how-tos for making voicetronix openline 4 to work with Asterisk. I have been contacting Australian Digium resellers and Digium cards are not approved in Australia. So I suppose Australian users are interested into putting Voicetronix in use. Any expereience to share will be most appreciated. David Kwok -------------- next part -------------- A non-text attachment was

Hi all, Can somebody help me get my OpenLine4 card running with asterisk@home? I've got my VPB drivers configured, but can't figure out how to map trunks and channels the typical way in the AMP config interface for Asterisk@home. Apparently I'm supposed to use /vpb/1 type commands, but I'm not sure how it should work. I'm relatively new to asterisk, I did a bunch of