similar to: Garbled threads.

Any idea on timing of 4U2? Reason being is https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=140002 and a pair of DPT SmartRAID V Milleniums. -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

CentOS made second place after Ubuntu and ahead of Fedora, according to my just-received Linux Journal. Congratulations CentOS team! -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

I'm posting here before going through all the fun to do up a real bug report to see if anyone else has seen this behavior. I have two identical Dynex external USB3 drive enclosures with identical 3TB drives in each enclosure. The dmesg output shows: $ dmesg |grep TOSHIBA [ 59.942546] scsi 7:0:0:0: Direct-Access TOSHIBA DT01ACA300 PQ: 0 ANSI: 6 [ 86.301123] scsi 8:0:0:0:

Ok, had a real oddity here, and am working to track it down. I've done a few updates to 7(1708) via CR at this point, and hadn't had any real issues, so during a slack time today updated our email server.? Now, prior to the update, I had our email server set up with postfix, but after the update the system had sendmail enabled and postfix disabled.? Like I said, I'm still looking

Ok, trying to install amavisd-new from Dag. Getting into a lot of problems, all of which seem to stem from Perl dependency issues. I have built several of the required modules by hand, but then got down to perl-MIME-tools. It builds FINE, but will not install. Why? Turns out, the perl RPM 'provides' perl(MIME::QuotedPrint)=3.01 but the module itself is 3.03. Build a perl module

Ok, I have a small dilemma, and I'm hoping someone here has had to do this before. I have at a site (not PARI) a server running some mission critical software that was written in 1997 for libc5, under AOLserver 2.3.? No, source code is not available for that version of AOLserver (it wasn't open-sourced until version 3.0, and the API changed rather dramatically at that point), not that it

While I know that, technically, the only i586 machines are the Pentium and Pentium MMX, it is still nice that I can use some headless AMD K6/2 machines I have lying around for CentOS 4. Many thanks for the effort expended to get that working. -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

Hi, I checked the sendmail and it is: [root at godslove root]# which sendmail /usr/sbin/sendmail Plesk uses sendmail and this is what is listed in my form that was working. I tried my form at 7:27 am this morning and this is the last listing in /var/log/messages Jul 3 07:05:42 godslove authpsa: IMAP connect from @ [67.138.221.157] There are no listings in /var/log/maillog. These are the

With the Dell OpenManage question on my mind (and having seen it answered very well), I was reminded of an interesting and a little surprising thing I saw yesterday. I upgraded a PowerEdge 2850 from CentOS4 to Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal

One system I have is configured thusly: AMD Duron 1200 (I have frequency restrictions in this application, and must stay below 1.3GHz or must be above 2.0GHz, and the 1200 fits nicely in our interference plan; besides, I was given the chip, and it's fast enough for the application). Soyo DRAGON KT400 motherboard, 512MB DDR RAM (DDR266). Silicon Image SATA interface card. Machine boots

Ok, got a quickie. I have an eSATA drive, a 750GB Seagate in an eSATA external enclosure, and a Silicon Image sil3132 ExpressCard controller for my laptop. The disk and controller work great in CentOS 5 (or F7, for that matter), if I specifically mount it. This is not how I want to have to use this drive, however. I want to hotplug it; that is, plug the controller into the laptop, and then

The apology first. If I've offended anyone, or just annoyed anyone, I apologize for that. I sometimes can go 'off the deep end' when I'm being sarcastic (an old habit from my news.admin days when I ran a Usenet site in the early 90's), and I'll try to not go into news.admin mode here in the future. Now, the question. I have a few ideas about how to do this, but am

Ok, did some experiments. Here's the scoop. You will need a live USB key of CentOS 6 with a persistence layer (overlay) and the EPEL gdisk package installed to make this thing boot. On a system with Chameleon already installed, boot the CentOS 6 install media. Installing Chameleon without OSX is an adventure that I've not done, so a 'testing' OSX install (10.6) with the

After reading through the various SELinux threads, I really became quite perturbed. I mean, really quite perturbed. As an IT Director (and the entire IT department, currently), if I were hiring a sysadmin I know for a fact that someone whose first response to a question on why something doesn't work is 'turn it off' would not get a job here. Neither would a sysadmin with as much

Hi After a kickstart install how do you get a yum update to run as the final stage of the install? a 'yum update' in the %post does not seem to do anything at all - no errors just nothing? thanks

Hi all, I have tried to install this beta release on PWS 433 au but I can not boot /kernels/vmlinux.gz image. Error is: "unsupported compressed image". Is not posible to install under this Alpha model?? Thank you. __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ?gratis! Reg?strate ya -

Hello I have an OS installation and data on a 40 gb drive that I would like to image to a 80 gb drive. I don't care if the resulting partition layout on the new drive is only 40 gb making me lose space. I just want to move everything from the older drive because I think it's failing. I have looked at partimage and mondo rescue as imaging solutions but both deal with partitions. CAn someone

Hello CentOS users, Is there any sort of package tracking system for CentOS? I'm used to Debian where I can view a changelog for each *Debian* specific package. This is great because I can see specifically what has been fixed and what known issues remain from release to release in the Debian package, which is subtly different from the upstream release. For instance, I can see

OK ... there has been an awful lot of attributing problems to the 4.4 upgrade that are not really upgrade problems. The best I can tell there is really only one major problem: 1. You need to install python-sqlite before sqlite (or at nearly the same time). To accomplish this you can do this: yum update python-sqlite sqlite Then after that, a normal yum update works fine. There are 2 other

Hello Everyone, I was using OpenGroupware but just hosed my system. Since I'm starting from scratch I would like to know what everyone's using for web based mail. I currently implemented cyrus-imapd and postfix which I used before. I was going to give dovecot a try but it wouldn't start even though it was supposed to be easier. I would like to move my postfix to a chroot but have