similar to: Compile problems on Solaris SPARC

currently we are able to use our USA sip phone to conenct into the E1 box, but still unable to dial out to chinese phone numbers. They said from their ISDN switch console, it shows D channel not connected to the voip server yet. here si the sip debug msg, we got a Message type: DISCONNECT (69) and unable to dial any numbers. Jul 12 12:56:26 WARNING[1523]: chan_zap.c:1931 pri_find_dchan: No

Greetings to all. I am hoping someone can help me out with a problem I am having getting my Cisco phones, 7960s and 7940s, to download the appropriate files from our TFTP server. The TFTP server is running on Fedora Core 4. The TFTP server appears to be setup properly: service tftp { socket_type = dgram protocol = udp wait =

I was just looking through the Wiki for some info on how to retain the original caller's callerid when make transfers to internal extensions, and I came across the parameter below: useincomingcalleridonzaptransfer=yes There is nothing in the zapata.conf file from vers. 1.2.7 so I am wondering if this is still a valid parameter. If not, does anyone know how I can do this? Thanks, Joe

Anybody know the proceedure to factory reset the a 7960 phone running 6.3 SIP software? I've tried holding # when booting the phone and nothing, i can do that on my 8.2 phone but this phone i just got with 6.3 isnt working. Also **# doesnt work either.. -- ~Shaun

Greetings to all, I ma having a problem with channel variables on a couple of our Asterisk boxes. Here is the setup. Asterisk on customer's site (1.2.5), using IAX to our external GW (1.2.5), IAX to PSTN GW (1.0.10), E1/PRI to PSTN. On the External GW, we also have an IAX trunk to a VOIP provider if for some reason the E1 is down. If the DIALSTATUS is CHANUNAVAIL, which should be

Geetings to all. I am having a hell of a time getting incoming SIP connections to work properly, and am hoping that someone can help me. Here is what I am using as a guide (from the wiki): "Incoming SIP Connections When Asterisk receives an incoming SIP call, the SIP Channel Module first tries to find a [user] section matching the caller name (From: username), then tries to find a [peer]

Hi: i have a problem. Mi extensions.conf: exten => _N.,1,Setvar(VOICEMAILREQ=${EXTEN}) exten => _N.,2,SetAccount(${customer}) exten => _N.,3,SetCDRUserField(${VOICEMAILREQ:1}) exten => _N.,4,ResponseTimeout(5) exten => _N.,5,Background(ifyou) exten => _N.,6,Background(silence/1) exten => _N.,7,Background(ifyou) exten => _N.,8,Background(silence/5) exten

Hi, on 2 different servers, running 7.1-stable + zfs, I get this error rather frequently: Feb 5 17:01:03 warhol-00 kernel: impossible packet length (543383918) from nfs server sunfire:/dist Feb 5 17:01:03 warhol-00 kernel: impossible packet length (1936028704) from nfs server sunfire:/dist Feb 5 17:01:03 warhol-00 kernel: impossible packet length (1869363744) from nfs server sunfire:/dist

Minor fix. I'm using this in my RPM specfile. John --- ./zaptel-1.0-RC1/Makefile.bigu 2004-07-16 17:09:07.000000000 -0500 +++ ./zaptel-1.0-RC1/Makefile 2004-08-18 16:28:45.000000000 -0500 @@@ -316,10 +318,10 @@ elif [ -d $(INSTALL_PREFIX)/etc/init.d ]; then \ install -m 755 zaptel.init $(INSTALL_PREFIX)/etc/init.d/zaptel;\ \ fi - if [ !

I am on a server I called "email. But dovecot says i am on sunfire.outputservices.com ------------------------------------ dovecot --hostdomain sunfire.outputservices.com ------------------------------------ I would like to at least get it to say email.outputservices.com. But what I really want it to say is posta.outputservices.com. First where does --hostdomain get it's

Hi all, Sorry for the slight off topicness, but I''m looking around for an OEM Opteron server (more server will follow later) at the moment that will run Xen 3.0 and Debian Sarge. Basically I''m looking for any ideas and opinions about how well and how easily the hardware is supported by a Xen/Debian environment (for both domUs and dom0). Ideally a server with all the drivers in

Mem: 2075040k total, 1331452k used, 743588k free, 50896k buffers Swap: 2031608k total, 144k used, 2031464k free, 1191532k cached SunFire X2100 running Centos 4.3. Linux maytag1.texoma.net 2.6.9-34.0.2.EL #1 Fri Jul 7 19:24:57 CDT 2006 i686 athlon i386 GNU/Linux rgds/ldv

Hi all, New to the list and (mostly) new to CentOS. We have just moved from running RHEL to CentOS on our main production servers. Anyway, I am configuring a couple of new SunFire v20z servers here at the moment and trying to get the systems' management interfaces to work fully under CentOS. First issue was trying to install the openipmi RPM from the CD that came with the SunFires, this RPM

Hi, we have SunFire X4140 connected to Dell MD1220 SAS enclosure, single path, MPxIO disabled, via LSI SAS9200-8e HBA. Disks are visible with sas-addresses such as this in "zpool status" output: NAME STATE READ WRITE CKSUM cuve ONLINE 0 0 0 mirror-0 ONLINE 0 0 0

We have a SunFire X4500 running Solaris 10U5 which does about 5-8k nfs ops of which about 90% are meta data. In hind sight it would have been significantly better to use a mirrored configuration but we opted for 4 x (9+2) raidz2 at the time. We can not take the downtime necessary to change the zpool configuration. We need to improve the meta data performance with little to no money. Does anyone

Greetings, on this matter, Sunfire x4150 a 1U machine with 2xcpu sockets, "eight" drive bays, 64 GB expandability, 4 NIC packs quite a punch for its size. I don't think I've ever seen such power in such a small package Regards Rajagopal

Hey folks, I'm running RHEL 5.3 on 6 boxes - and on every one of them sensors-detect finds nothing. 5 of them are Sun fire 2250 machines, and 1 is Sunfire 4170. Googling and searching this list does not seem to find anything. When I log into the Sun hardware management interface (web interface) I see that it of course is correctly detecting various temperatures of things. But for some

Hi ! I wonder if the R application is capable of utilizing more than one CPU. I need to know since we run it on a SunFire 3800 with 8 750 USIII cpu:s and on a E420R with 4 USII cpu:s and we don't feel like we get the performance we could expect. I've seen some old discussions claiming that it isn't. With kind regards Lennart Araskoug

Hi all, I just received a SunFire 880 machine and would like to install CentOS on it I think it is possible but should be very interested on advices and tips & tricks on how to do it the best way... Thanks for your help... M$-Internet Exploder est le cancer de l'Internet, voyez pourquoi ici : http://www.aful.org/ressources/documentations/msie-problemes-securite/ -- (?- Bernard Lheureux

I have just built a new SunFire X4100 server with an Adaptec 2230SLP RAID card using FreeBSD 6.2-PRE kernel (from September 20). Everything is working extremely well except I cannot run the aaccli utility on this controller. When I try to open the controller, it gives this error: Command Error: <The current AFAAPI.DLL is too old to work with the current controller software.> On