similar to: oh323 driver and RFC2833

Hi all, Sorry if this has been answered previously, but I have not had any luck trying to find it. I am trying to connect my Asterisk server (1.0 stable, Fedora Core 2, kernel 2.6.8-1.521) to connect to a gateway that can only support H323. I have installed the asterisk-oh323 channel driver (version 0.6.3b) using Open H323 1.13.5 (patched as per asterisk-oh323's instructions) and PWLIB

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Hi, I just installed OH323 Plugin and im now tryin to make simple Configuration to connect Openphone and Xlite to my Asterisk-Server. All works fine, i just wanna know if there's a better way to do it? Is there anything wrong with my Config? OH323.conf [general] listenAddress=0.0.0.0 listenPort=1720 connectPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=8000 udpEnd=8005 fastStart=no

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Hi, ALL: I install my oh323 channel driver following steps of http://www.oinko.net/astrecipes/index.php?action=artikel&cat=270174&id=10&artlang=en I works my asterisk well before install the chan_oh323.so. But after I do "make install" the oh_323, my asterisk crash and show me the following message (asterisk -vvvvvvc). Does anyone have any idea about it? What's wrong

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

I am using Asterisk (Debian unstable packages) with an OH323 connection to my provider. Everything is working except for the generation of ringback tones when I receive inbound calls from the PSTN. My provider tells me that we're sending call progress indications and that because of this they're expecting us to generate the ringback tone. Does anybody know how to configure this in

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Hello there. Is there somebody with this connection working? I can't seem to make this work at all. Could someone please share some .conf files? Cheers, Vedran. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050818/71480bd9/attachment.htm

Hi, try to setup asterisk as an ISDN2H323-Gateway. The only problem i have after establishing a call is, that Audio works only from IP to ISDN-Phone but not from ISDN to IP-Phone. A known problem ??? Thanks in advance Michael i am using asterisk-cvs, pwlib V1.6.6 (janus), openh323 V1.13.5 (janus) and oh323-0.6.0 Here are my config's ############## # modem.conf # ##############

I've complied the OH323 .so successfully and can easily receive calls from my H323 gatekeeper (using 711u), however it seems that all outgoing calls are refused and I'm getting "reason 23 (Temporary failure)" as an error code which I can't find documented everywhere. My H323 gatekeeper needs a 001NXXNXXXXXX to dial out to the PSTN even if I'm in north america (Montreal)

Hi Every time I hangup on my AGI script Asterisk crashes if it is not running in console mode. (happens when using python and perl AGI scripts) I'm desparatly trying to get my employer to let me use Asterisk. So I must get this to work. I've posted about this before, I'm sorry, but I'm desperate. I'm running RedHat 9.0 (kernel 2.4.20-8 everything else updated) I'm

I'm trying to connect an asterisk server via oh323 to a Lucent iMerge. I patched the code due so that Lucent can handle asterisk's ver4 h323 http://www.voip-info.org/wiki-Asterisk+Lucent+iMerge+Configuration I can now successfully dial in to our company over multiple lines. The issue is when I dial out The first outgoing call connects to an outside user A The second call drops the first

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Hi everyone, Could somebody enlighten me on this one? I have configured my asterisk to run on oh323 using codec g729. Incoming calls are working okay. But the thing I want to work is say pressing some options, say dial 1 to go to voicemail or dial a certain number to dial a specific extension. I have a config for this and tried calling from a normal PSTN and is working. But i just can't seem

Hello list, I have many IP hardphone like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider I have this problem: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider ( G729 ) only if I disable