similar to: Anybody using SIP Interaction Proxy 2.X and Asterisk CVS head?

Dear Asterisk experts, I've just downloaded Asterisk CVS version (since I'd like to manage its configuration from RealTime). Next, I have kphone on the same Linux host, and VmWare virtual machine with Windows and X-Lite IP phone inside. I successfully tested the demo's with X-Lite, but failed to hear something with kphone (v4.1.1). There were NO problem with this kphone and stable

I know asterisk isn't a real SIP proxy and is more of a multi-protocol pbx with limited SIP support, but... ... is it possible if you have a central registration server that handles all of your dialplan routing and several asterisk PSTN gateways that it routes calls to for an outbound SIP conversation using reinvites and NOT have the registrar box try and send ANY RTP traffic back to the

I have an Asterisk 0.4.0 install working with two grandstream budgetone 100 phones, gnophone, and kphone. This is a private network segment (172.17.x.x), with the PBX configured on my outbound firewall which has a public address (66.x.x.x). - I can make calls between phones - all extensions are working. - I can make IAX calls to IAXTEL. No problems (apparently gsm only) - I can call SIP phone

Hello Asteriskers, I'm confused about why Asterisk is not a SIP proxy and why exactly this can affect the performance of a large Asterisk system. I know that Asterisk acts as a useragent endpoint, but my doubt is why exactly Asterisk could overload the call flow if the RTP voice stream goes from the caller to the called party. Does someone know how many calls or pencentaje that could handle

Folks, I have to admit that I MAY have changed something (at someone's advice) on a previous CVS head (May 28), but I'm not sure. I think that it had to do with changing "digest realm," but that may be a different issue. At any rate, I had both incoming and outgoing with iConnectHere. Now, I made exactly ONE change: I upgraded to the CVS head dated 7/30. I

Hi there I have a pbx (v16.10) on AWS (Ubuntu 18.04) with Freepbx (14) that I am trying to set up the proxy reSIProcate on the same host as pbx. I can make it all work when the proxy is on a different host but when the proxy is on the same host asterisk sends the media address as 127.0.0.1 which the end user then happily sends media to 127.0.0.1 but it doesn’t get anywhere. Asterisk then

After fighting with a "Unable to create/find channel" [1] [2], I gave up on my previous installation and rebuild my asterisk from CVS-Head. I guess the Debian package available today is broken somewhere (after a previous broken release made with an old libpri package), but now I'm having another issue with my 7960 registration (SIP v. 7.1). The call is being (silent) rejected by

Hi all, I have been using asterisk to do such kind of thing, But I must admitt, this is not 100 % conveniant (Mainly because Asterisk isn't a SIP Proxy). I just wanted to know if you knew/used some kind of SBC or packages which would deal both with SIP AND RTP ! SER/OpenSER woulc be a good SIP Proxy ... but then how to deal with RTP ? Any tip, info greatly welcome ! Thanks, JM

I have a problem that has developed within about the past 3 months with my backup outgoing SIP provider (I am not sure when this problem started since it involves only my backup provider which is used rarely). The problem is that most (not all) outgoing calls fail during the earliest stages of call setup, specifically after the provider sends back a "407 Proxy Auth Required" response.

Hi there, i did some tests with two Cisco 7912G phones (SIP stack) yesterday. With both ethereal and tcpdump listening on the Asterisk-Server's NIC, it came up that all RTP packets were doubled, with some small but almost constant delay (~460 us). The setup is 7912G <--> ASTERISK <--> 7912G The tcpdump output shows RTP traffic ASTERISK --> 7912G: 000000 IP $ASTERISK.17944

Hello, short question: is there a possibility to use asterisk as an outbound proxy? iam open for any suggestions, use asterisk trunk, dirty patches, ugly workarounds, everything. What is want to build is: SIP Phone -> via TLS/SRTP -> Asterisk as outbound proxy -> via UDP/RTP -> VoIP-Provider So Asterisk should just forward any incoming SIP messages (INVITE, REGISTER) to the

Hi all! This is my VoIP network scheme H323EndPoint ----- --- GW H323/SIP-IN -- -- SIP Phone | | (Sipquest) | | | | | |

I have a DID but for some reason is not working in asterisk-1.6 The same sip connection in asterisk-1.4 is working OK, but it doesn't work with asterisk-1.6 Here is my sip.conf section: ... [actio-out] type=friend secret=password user=48746612254 username=48746612254 fromuser=48746612254 authname=48746612254 callerpage=48746612254 fromdomain=sip.actio.pl host=sip.actio.pl insecure=very

After getting some ERRORS like this: [Oct 8 21:42:49] ERROR[31903] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[2485] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[31903] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[2489] rtp.c: No RTP ports

Hi all, Today I've stumbled upon a very strange behaviour with an analog fxs/fxo gateway (AddPac AP1002, http://www.addpac.com/english/AP1002.html) connected to a CVS HEAD(from today) Asterisk server. This manifested itself after enabling the CallerID on the pstn lines connected to the FXO ports of the module. Both FXO modules have their own sip username/passwords and are registered to the

Hi All, I have a weird problem. I have asterisk setup using the G729 Codec to receive Incoming calls both from a SIP Gateway (SER and Quintum) and via ISDN using i4l and have rules setup in extensions.conf for sending calls out either back via the SIP Gateway or ISDN. What I want to do is have PSTN calls come in via the SIP Gateway, be answered by the auto-attendant and then sent back out to

Hi, I'm am getting doubled DTMF on some digits with one of my providers who also uses asterisk. We're using SIP, with dtmfmode set to rfc2833, and the codec G.711. Once out of every five or ten calls, there are no problems, but more often than not, the DTMF is getting doubled-up on at least one of the digits of the extension dialed. I've tested with a CVS-HEAD from Febuary, and just

Hi to all the ML. I'm new here. I start to use asterisk with realtime configuration, with pgsql backend connected via odbc. The connection between asterisk and pgsql works fine. I create a table sip_conf with 2 user (for testing purpose), 1401 and 1501. Those are the records: asterisk=> SELECT name,host,type,context,secret,defaultuser from sip_conf; name | host | type | context | secret |

Last week I migrated some of our servers to Asterisk 1.4.18 and we started seeing audio drops of several seconds during SIP calls. After investigating it we noticed that Asterisk was increasing the RTP timestamps abnormally during a conversation. I'm including a text file with a subset of the data collected by Wireshark that shows the problem (I have the complete packet capture if anybody

I have an asterisk server up and running, using Firefly in IAX mode works great, even with Firefly behind a NAT (as expected, since IAX works really well with NAT). Now I'm trying to get X-Lite and/or Firefly to work in SIP mode from behind the NAT, and I can't seem to get there. At this point, the phone will successfully register with Asterisk, and the Asterisk qualify messages get