similar to: 7 digit dialing to e.164 format

Is it at all possible to set a Global Variable freely whenever a context gets used without having to enter an extension priority to use SetGlobalVar? This is really limiting the dialplan for me. Heres an example of what I would like to be able to do. [globals] AREACODE= [local] exten=_NXXXXXX,1,Dial(SIP/${AREACODE}${EXTEN}/blah) [anyoldcontext1] AREACODE=313 include=local [anyoldcontext2]

Thanks for your reply, [globals] AREACODE=381 [outbound] exten => _NXXXXXX,1,Dial(SIP/SIP-Provider/1${AREACODE}${EXTEN},80) did not work for me, any ideas? Thanks, On 04/27/2015 01:59 PM, Phil Reynolds wrote: > > > On 27 April 2015 21:32:42 BST, Motty Cruz <motty.cruz at gmail.com> wrote: > >Hello, > > > >I would like to add area code if clients dial 7

Hi all, Can someone point me in the right direction here. What I'd like to do with Asterisk is a) dial a 3 digit extention (i.e. 100) on my polycom phones and after the 3rd digit is entered, it dials that extension and b) dial 9 to get out like older PBX systems. Since my internal extensions start with a 1 I think what happens is I enter extension 100 for example, and the phone sits

Hi All, I have been attempting to get an AGI LCRdialout script to work. Basically what I need to have happen is when someone dials out a number the script check to see if it is local if so, go out the ZAP channel. If the ZAP channel is busy, go out the IAX channels, if IAX is all busy, go out the SIP channels. Here is a sample of what I have in my script. #!/usr/bin/perl use strict; use

Greetings, Currently my asterisk box is using Voicepulse. It works fine with the exception that people need to enter the 1+area code for local calls. I'd like to get around this if possible. The following is what I have in my extensions.conf.. exten => _1NXXNXXXXXX,1,Set(CALLERID(num)=6162997590) exten => _1NXXNXXXXXX,n,Dial(IAX2/${VOICEPULSE_GATEWAY_OUT_A}/${EXTEN}) exten

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

Users withing the office can dial a 3 digit extension and that will ring a phone. The problem I'm running into is you have to press xxx then press 'send or 'dial'. The pbx doesn't recognize a 3 digit number as an internal extension and automatically dial it the user has to initiate that call. Asterisk automatically initiates calls w/ 9+7 digits and LD calls,

i am using the freebsd port, which seems to not yet have WaitExten(), which i kinda want to use thusly [ext-666] exten => _.,1,SetVar(areacode=666) exten => _.,2,Background(zz-in-who) ; give them list of extns exten => _.,3,WaitExten(10) ; let them enter extn to call include => extensions include => applications include => speeddials

hi, on our incoming E1-PRI from german telco Arcor the leading 0 for the (area access code in europe) and the 00 (country accescode in europe) are missing on incoming callerids. only prepending a single 0 is not the solution as suggested by some writers on this list, because there is no way to differ between national and international callerids and it's not possible to make the decission

Cross posted from asterisk-biz: > > Is anyone willing to host/manage a website that people > > can simply browse that lists all current DID providers > > and their coverage areas? > It's a good idea and probably not too hard to implement, > it's just a case of deciding how far you want to go.. are > areacodes good enough? or do you need to go to NPA-NXX >

I need to insert/update multiple MySQL columns in a single row with the func_odbc function at the SAME TIME. Someone showed me how to use ARRAY to retrieve multiple values at the same time, but I need to SET multiple values. Can this be done? If not, I will just stick with MySQL, but that's a pain in the ass because the asterisk-addons package has no default rpm spec file for building an

We have now got our new PRI line (10 channels, 100 numbers) connected and everything is working except the outgoing caller ID. Whatever SIP phone I'm using, the CID that's shown is the very first number... ----- s n i p ----- [default] include => outgoing include => priin [outgoing] exten => _NXXXXX.,1,Macro(dial,08${EXTEN},${RINGTIME}) ; Local number (w/o areacode) -

Hello, I am having this mysql error in my ruby on rails application. ActiveRecord::StatementInvalid occurred in > event#lg: > Mysql::Error: Illegal mix of collations > (latin1_swedish_ci,IMPLICIT) and (utf8_general_ci,COERCIBLE) for > operation ''='': select * from locations where country = ''HU'' and > geo_state = ''08'' and city

Hi all, I've been beating my head against this for some time now. For incoming calls, I'd like to send my users a "localized" caller id number. By "localized," I mean one with out the 1+areacode for local calls and only 10 digits (minus the leading 1) for long distance calls. For example: I get a call from 15055551234. Since I live in the 505, I should see:

Hello, I would like to add area code if clients dial 7 digits, it that possible? currently clients dial prefix 9 plus local number, however my SIP provider is requiring to dial 10 digits. is it possible to add area code? Thanks, Motty

i have extensions in locations across a number of telco area codes. when someone in seattle picks up and dials 91234567, it would be nice to transform it to 92061234567. i would prefer not to have an extension context per area code. it would be cool to be able to set a variable in the sip.conf bit for each phone with it's geographic default area code. or other folk may have a better hack.

here is what I have: exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) exten => _9XXXXXXX,n,Set(dialnumber=${l_HomeAreaCode}${EXTEN:-1}) exten => _9XXXXXXX,n,Dial(SIP/SIP-Provider/${dialnumber},80) not having success; "Got SIP reponse 503" Service Unavailable" On 04/27/2015 02:19 PM, Bryant Zimmerman wrote: > Motty > Yes > From your dial plan accept 9 + 7 digits

Will this work to match any number from the 770,404, or 678 area codes? _[404|770|678]NXXXXXX If this won't work, is there a pattern that will do this? Yours, Michael Munger, dCAP 404-438-2128 michael at highpoweredhelp.com <mailto:michael at highpoweredhelp.com> Attachment encrypted? click here <http://www.highpoweredhelp.com/tutorials/wincrypt/> .

Ernest, I hadn't thought of doing that, though having that added protection would be nice. However, what I'm trying to do it have an incoming call at my home number follow me to my cell phone for selected numbers -- Since I already have three way calling, I'd like get Asterisk to essentially three way my cell phone into the call (or my office number, etc.) I understand the

Any ideas? This one would make the 10th email received. Return-Path: <centos-bounces at centos.org> Received: from psmtp.com (exprod8mx192.postini.com [64.18.3.171]) by mail.pdinc.us (8.12.11.20060308/8.12.11) with SMTP id p2LKkur4025229 for <jpyeron at pdinc.us>; Mon, 21 Mar 2011 16:46:57 -0400 Received: from source ([72.26.200.202]) by exprod8mx192.postini.com ([64.18.7.10]) with