similar to: RxFax problems.

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091111/2b828eff/attachment.htm -------------- next part -------------- Hello. I am trying to execute an fax reception script and i am getting the following: [Nov 11 08:40:52] WARNING[12800]: app_system.c:88 system_exec_helper: Unable to execute '/var/lib/asterisk/scripts/mailfax ""

Hey All, I'm still (since April) having problems getting RxFax to work over an ISDN4Linux channel. Just wondering if anyone has had any luck getting it to work? I have done a CVS update today (about half hour ago) and made sure I have the latest version of spandsp according to Steve's website (spandsp-0.0.1k). When I was compiling asterisk, I got the following warnings:

I have this in my extension.conf: [incoming_28345474] ; 8862100 is the hotline number of the Welltech 3804 ; exten => 8862100,1,NoOp(${CALLERID(num)}) exten => 8862100,2,Wait(1) exten => 8862100,3,Set(CALLERID(num)=${CALLERID(num)}) include => fax2emailstart [fax2emailstart] exten => 3000,1,SetVar(CALLEDFAX=${EXTEN}) ; me exten => 3000,2,Answer exten =>

Hi All I am using asterisk version cvs-v1-0-04/15/05 and spandsp 0.0.2pre18. I can receive and then email most faxes without issues, but recently I am having this issue when receiving faxes from a particular person. I can receive the faxes ok, but there are alot of bad rows as indicated by my logs below and the fax is not readable. I have included a good (from another user) and a bad fax. We

Hello all, Can this be done ? Would setting the variable FAXRESOLUTION to a appropriate value affect this change ? > http://www.asteriskguru.com/tutorials/rxfax.html Variables connected with the application LOCALSTATIONID - used by to application to identify itself to the remote end LOCALHEADERINFO - used to generate a header line on each page REMOTESTATIONID - set by the application, the

Hi All I am using asterisk version cvs-v1-0-04/15/05 and spandsp 0.0.2pre18. I can receive and then email most faxes without issues, but recently I am having this issue when receiving faxes from a particular person. I can receive the faxes ok, but there are alot of bad rows as indicated by my logs below and the fax is not readable. I have included a good (from another user) and a bad fax. We

Below is my extensions.conf for the fax part [incoming_28345474] ; ;******************************************************************** ; BEGIN - Inbound call handlers ;******************************************************************** ; exten => 8862100,1,NoOp(${CALLERID(num)}) exten => 8862100,2,Background(if-u-know-ext-dial) exten =>

Hello All, I am looking to receive faxes via my inbound SIP, but I can get it to answer the fax. Now I did test the SIP inbound to a phone and that does work it is just the fax part I am having issues with any help would be great. This is the error I am getting Mar 11 15:08:49 NOTICE[14322]: rtp.c:430 ast_rtp_read: RTP: Received packet with bad UDP checksum Mar 11 15:08:49 WARNING[14322]:

How should be the macro rewritten? [macro-faxreceive] exten => s,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif) exten => s,2,DBGet(EMAILADDR=extensionemail/${MACRO_EXTEN}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,Set(EMAILADDR=ronald@elmit.com) exten => s,104,Goto(3) ... [Jan 23 10:43:38] -- Executing Macro("Zap/3-1", "faxreceive") in new

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf:

Hello! I'm try to implement a fax service using spandsp (0.0.2-pre10) and NVFaxDetect (since I'm using a SIP channel). I receive the call from pstn on my SIP/PSTN gateway (welltech 3804). The fax is detected by NVFaxDetect and than a macro is started. The welltech use Alaw codec. The problem is the following: NOTICE[22270]: Dropping incompatible voice frame on

Hello: I have been using the asterisk system now for almost 5 months. I'm very happy with it's performance, however I have been using the RXFAX on and off for the last month or so. I gave up after a while and just had it route to my analog fax machine in the fax context. However, I have always had the implementation that it would go to a macro.. macro-faxreceive, and to the rxfax of the

is /usr/local/sbin/mailfax flagged to 755? ________________________________ Von: asterisk-users-bounces@lists.digium.com im Auftrag von Rob Danz Gesendet: Mi 13.07.2005 17:17 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] SpanDSP rxfax, no tiff. Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the

Hi all, Here's our setup: Asterisk 1.4.18 Agx-ast-addons 1.4.5 Problem: When accepting a fax, the fax itself comes through just fine, and it does successfully create a tiff file. However, the dialplan should be executing a system command right after that completes, but isn't due to hanging up early. I'm getting a cause 16 hangup, which I believe is a "Normal Hangup", but

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

I have managed to get spandsp working, and if I dial a specific extension I can receive faxes. WhooHoo. However, I was wanting to use the "fax detect" option in order to allow individuals to receive faxes, but can't get that to work. Given the following extensions (mainly copied from examples on the wiki), why is the call simply passed onto the sip device rather than being

Hello All, I have downloaded and installed spandsp and downloaded rxfax, etc and rebuilt asterisk with app_rxfax. I have added the following to my extensions.conf: [macro-faxreceive] ; ${ARG1} - sendto e-mail exten => s,1,Wait(2) exten => s,2,Answer exten => s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) exten => s,4,SetVar(EMAILADDR=${ARG1}) exten =>

Well, my faxes passes through asterisk successfully, however I still have some problems about fax reception by rxfax. The softfax answers, and negotiates transmission, however then as some stage of communiation something is wrong. But I have nothing more but this log: Jun 2 00:10:21 DEBUG[16900]: chan_zap.c:4242 zt_read: DTMF digit: * on Zap/10-1 Jun 2 00:10:22 DEBUG[16900]: chan_zap.c:4242

Hello All, I just started to use asterisk with Digium card (4 fxo ports) and I've met some problems ( I'm just new in asterisk so questions may be stupid ) my environment: Debian testing, asterisk 1.0.9 zaptel-1.0.9 TDM04P 1) when asterisk receiving incoming call on TDM card all networking cards stops to send or receive any data for some time nothing suspicious in the log files,