similar to: ZoomTel x5v Model 5565: is it any good?

I'm looking to handle 3 PSTN lines with my Asterisk server. I have a Digium TDM22B and Sipura 3000. The Sipura works great, but the TDM22B seems to have terrible problems with my board---virtually all peripherals need to be disabled in BIOS, and then there is terrible noise, terrible silence and virtually no ability to use DTMF in IVRs. I really wish the TDM22B worked, because I much

Just noticed this today: Digium TE220B Dual Span T1/E1 PCI Express Card with Octasic DSP-based Echo Cancellation Module<http://www.voipsupply.com/product_info.php?products_id=3352> It's about time Digium got on the ball and made PCI-e cards. What are people's experiences with this card? Anyone know if there are plans for a PCI-e analog card for FXO use? -------------- next part

Considering getting the card pictured here, http://www.voipsupply.com/product_info.php?products_id=2419&searchid=341962, and was wondering if anyone had any experience with those in a 2950's case. From the picture it looks to be a pretty large card. I'd hate to get it and have it not fit! -- Kyle Sexton

Hello everyone, I'm trying to set up a Asterisk server. I have two cards - one is an BeroNet BN2S0 with two ISDN lines (4 channels): http://www.adcomtec.com/webstore/beronet_bn2s0.php?cat=90 and a Rhino R8FXX with one FXO module and two FXS: http://www.voipsupply.com/product_info.php?products_id=2940 I would like to set up an Asterisk server with 8 phones, which will share the phone

Hello all, Just a question, on asterisk box : I looking on the web , for asterisk at large , and 'asterisk future of telephonie' ... If we would like to change our OLD PABX 600 phone with 4 E1, to install a asterisk with full ip phone in SIP, Could we use 1 Box for asterisk with voicemail, zap channels and some agi script ? thanks Fabrice

Hi there, I know this question is kind of stupid. But, I don't know anywhere else to ask. I've received some answers when I asked about the need of having a zaptel interface to make the meetme application work, that said that it was better to have a real hardware then the zaptelrtc software modules. So, my question is, would any of the following cards work with the meetme

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

We are extremely pleased to announce that we have finalized the schedule (http://canadaonrails.com/yvr06-schedule.html) for the upcoming Ruby on Rails conference in Vancouver, BC on April 13th - 14th, 2006. There are 15 speakers packed into two full days of presentations ranging from 30 minutes to 90 minute keynotes. Presentation topics include: * Where will Rails be riding next? * Enterprise

I'm considering building a network gateway using a Via EpiaCN10000EG motherboard like seen here: http://www.logicsupply.com/product_info.php/cPath/79/products_id/444 I've heard that this is a pretty recent mobo and drivers for it are in Ubuntu but that a 2.6.9.x CentOS kernel might have troubles with it. Anyone have any opinions on this mobo? Thanks jed

Dear All. I'm very new to CT, but attracted by asterisk. I plan to start learn to build IVR, based on asterisk. Do I need FXO/FXS card to start building simple IVR box ? Can I use OEM X100P - FXO PCI Card ( http://www.digitnetworks.com/store/product_info.php?products_id=28 ) to start build an IVR box ? What is the cheapest FXO PCI card that can use with asterisk to build my first IVR box ?

I'm open to flames if this has already been posted. http://www.sparkfun.com/commerce/product_info.php?products_id=8300 As of April 17th, SF listed a new Ogg Vorbis decoder chip that is seriously listing for $10 USD. I'm excited. I think I'll buy a couple and integrate them into an IR streaming project I've been tinkering with. -Chris Harrington

Hi, I'm trying to work out a way to build a really cheap 24 port GSM gateway. Currently this is the best way I've come across: - Purchase 3 GSM-WT208 GSM Gateways with 8 x Analogue / GSM Channels (Off http://www.discountcomms.co.uk/ - Approx. USD $1200) - Purchase 1 RHINO Channel Bank off VoIPSupply.com (approx. $1800 for a 24 FXO channel bank) - Purchase 1 cheapo Intel based PC

Hi, during gradual migration to Asterisk, I put Asterisk in front of a legacy Alcatel PBX: PRI PSTN <--> Asterisk <--> E1 cable <--> Alcatel PBX After successful deployment of VoIP phones, it's time to drop Alcatel PBX! I'd like to keep some of analog lines to support modem, fax and some older stuff. What's the best choice? A channel bank or a TDM2400P card? Can I

Canada on Rails presents, Riding the Rails Workshop on May 27th and 28th in Vancouver, BC, Canada. This is a two day intensive workshop for those eager to get into Ruby on Rails. Alex will drive you through the principles behind Ruby on Rails, such as MVC, convention over configuration, Code Generators, and the other core principles driving Ruby on Rails to be the most celebrated technology

BCIT Downtown Campus[1] has been chosen, with a maximum capacity of 300 people. With already over 50% of the seats filled, be sure to register soon or you might miss out on one of the most exciting technical events to come to Vancouver. YVR06 will be twice the size of the last conference by Open Source Events[2] held last June, and with 4 times the amount of speakers, during the two days. All for

G'day. Has anyone here used the Dualphone SIP products (their LAN range) together with Asterisk sufficiently to comment on them? http://dualphone.net/ https://www.dualphone.com.au/product_info.php/products_id/51 I am interested, specifically, in these questions: * are they generally reliable and good quality, especially audio quality? * do they work well with Asterisk for

First of all, don't shoot me if I got some things wrong. I personally recommend (without much success :-)) to buy from www.cheeplinux.com (Definite Software), because I believe this is of some help to the CentOS project. At least, to some people involved in it (please correct me if I'm wrong). ?1. Anyway, as PayPal is _not_ an option for some countries, donations to CentOS.org can't

Hi List, Yesterday night after a power off due to a faulty UPS my asterisk doesn't want to start anymore. Here is what I get on the CLI: Asterisk Ready. *CLI> Disconnected from Asterisk server: Bad file descriptor. Executing last minute cleanups == Destroying musiconhold processes Asterisk uncleanly ending (0). I use 1.2.7 I think on a debian sarge and cdr_pgsql too. Any ideas?

Thank you very much for this hint. My apologies that I messed up a thread for my post - I had a message open and simply clicked on the link ... slap slap. Would anyone know of a better choice to multiplex three fxo lines into an asterisk box? I can still use three Digium X100P cards, but methinks, a seperate unit would be better. Thanks again, Peter >> I am located in the UK and

Date: Fri, 31 Aug 2007 13:19:32 +0300 From: "Dovid B" < > Subject: Re: [asterisk-users] phone as control interface (was 99 bottles of beer) To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com> Message-ID: <05bf01c7ebb8$6ff3ffc0$0a00a8c0 at DovidLaptop> Content-Type: text/plain; format=flowed;