similar to: Some info about Cisco's 79xx, and Sipura's phones

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

Hello, I managed to terminate calls from cisco: as5300 and 7206 to asterisk over h323. I tested both oh323 from inaccessnetwork and JerJers chan_h323. I used 1.12.2 version of oh323 and 1.5.2 version of pwlib. After latest changes from JerJer chan_h323.c works ok when receiving traffic from ciscos. I havnt found any audio problems although I didnt send much traffic. Latest oh323 has some

Hello, How to reproduce this bug (?) : 1. register sipura spa2 with 2 lines on asterisk. 2. use first line to call somewhere. 3. while using first line try to call from second line somewhere else in 3 step i hear fast busy tones on second line and asterisk console gives me this short error: Mar 27 07:01:43 NOTICE[29656]: chan_sip.c:3629 process_sdp: No compatible codecs! My sipura adapter

Hmmm... Folks, I beg you pardon, if I'm telling something which was said before, but actually I have not found this anywhere, neither on Voip-info.org or in several Asterisk's docs. So, here is the statement: If SIP extensions are in DIFFERENT CONTEXTS, then RTP traffic between them will ALWAYS go via Asterisk. I.e. Asterisk WILL NOT issue Re-INVITE even if: 1. Both UAs have

Hello, I have one question regarding *. Default configuration for asterisk is to keep configuration(s) in ordinary text based config files. My question is simple: is it possible to keep those config info (at least, to start from - sip.conf, extensions.conf and voicemail.conf) on a database, which asterisk access via ODBC. If it is possible, I'd appreciate if someone points me where I can

I have recently started experimenting with Asterisk. I am running the system the other side of the a NAT router and trying to connect to FWD. I have opened UDP ports and have configured sip.conf to handle NAT. The problem: I can call from the FWD phone and the extension on Asterisk rings and there is two way sound so no problem. Now if in the extension.conf file I have, exten =>

Hi list, Well I really didn't want to see things get to this point, but Sherman at Sipura along with their President Jan F. leave me no other choice. SIPURA has been provided a letter from our attorney for Breach of Contract and damages. They have yet to respond. A quick background. 1. Sherman (SIPURA's Director of Marketing), stated that we would do a join press release for the Oct

Shawn, That's a complete load of manure. I have an office full of 7960's, they work great with asterisk with the SIP images loaded. I'm about to pick up a lot of 7912's (simple one line phones, same as the 7905 but it has a built in switch). These phones have also been confirmed to work with Asterisk. I would recommend not going directly to cisco, and just find a reseller who

Hi, To push voice through a long thin wan (dsl) there are two choices: (1) have the cisco's (7912G) talk g729a to each other (reinvite=yes), or (2) have the cisco's talk to their local * in ulaw (reinvite=no), which talk to each other through a more advanced low-bandwidth codec (ilbc or speex) which is best? (2) would have more latency, wouldn't it? Did I miss a third option?

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

Hi there everyone! I've bought a Sipura SPA 3000, and succesfully connected it to my Mac, where I installed Asterisk 1.4.0. Both ports (FXO and FXS) are well configured). However, living in Brazil, I'd like to know if there are optimal settings to my PSTN that I should enter into the config of the device. I experience a little bit of echo on the FXO probably because I raised the gain of

Hello, I have something like this: SIPUSER <-sip-> ASTERISK <-oh323-> AUDIOCODEC <-e1-> PSTN After calling from SIP to PSTN (and from PSTN to SIP too) I can't hear anything only in my SIPUSER. At the PSTN side everything is OK. I have another network with another h323/sip (in the place of asterisk) and there everything is OK. In AUDIOCODES logs I see that everything goes

I'm trying to get working a spa3000 with asterisk. My problem is I cant get wroking the incomming calls (I installed the lastest firmware). My problem is asterisk is rejecting the authentication from the spa3000. Asterisk answers forbidden (SIP/2.0 403 Forbidden) and I think I placed the username and password correctly... Sip.conf says this: [linea2] username=linea2 type=peer secret=1111

I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk. When I connect to the Sipura to dial out on the PSTN line connected to the Sipura's FXO port, it gives me the dialtone of the PSTN line and then I can hear the DTMF for the number I dialled beforehand. It does work but the customer perceives this delayed second DTMF feedback as "unprofessional" and the

Hi folks, In an effort to save bandwidth (our 7905s run over a WAN) we've switched from ulaw to g729a. We purchased 4 licenses from Digium (4 SIP clients, low call volume), and they seem to have been accepted: [codec_g729a.so] => (Annex A/B (floating point) G.729/PCM16 Codec Translator) == G.729 Host-ID: 07:53:aa:d3:e2:f2:bd:cc:27:60:9d:5f:da:eb:5d:e9:6e:09:a1:4e == Found license

The thing I dislike the most about the 79xx phones is that in DHCP mode, they expect the DHCP server to tell them their TFTP server address. They won't let you set it manually. So if I don't have DHCP server that gives TFTP server info, which is most of the DHCP servers at out there, then the phone won't be able to download any updates made to the SIP000*.cnf file. Using dhcpd on

I am hoping that someone has had better luck with this than I have. I would like to connect Cisco 7940s and 7960s to the Netgear FS116P, and take advantage of its POE. I know that the Cisco phones use Cisco's "pre-standard" POE implementation, but as I understand it the difference is really only two pins. I bought a bunch of PowerDsine inline power adapters which supposedly change

Does anyone have a Sipura 3k running, and using the FXO? I've got things working right, but if I try to toss a *67 in the dialplan, it seems the sipura is throwing a 403 forbidden back. For example: exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/${EXTEN:1} works fine exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/*67${EXTEN:1} does not (even if I toss a couple Ws in) I can't

I have Asterisk version 1.0-RC1 running on Debian Woody. I have 1 analog phone working, 2 inbound lines working, X-Lite is working. The problem that I am having is with Cisco 7960 with SIP version 7.2 software. I can make outbound calls and they work fine, I even get a notice that I have voice mail on the phone and it seems to register properly but I can seem to dial to the phone.