similar to: TDM 400p

Are there any other relatively low cost analog cards available? I'm interested in finding something that might work a bit more reliably than the TDM-400P.... regards, Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050213/d772539e/attachment.htm

Has anyone figured out how to power a Digium TDM 400P card in a Dell 1750 server? I opened the server and noticed that there is no access to 4 pin power to power the card. Is there some sort of adapter that I need to power the Digium card in a Dell Server? I see that the 1750 is listed on the Wiki. How have others powered the TDM400P in a Dell 1750?

(Sorry of this appears in the list twice, but I wasn't sure if it was blocked or not) Hi there, I'm having a problem with my TDM-400P which has been working like a charm up until very recently. It started to fail last week, and so I was hoping someone could illuminate me with some information as to why. Its configuration is as follows: ------------ FXS (green) module is in position 1,

I'm running a TDM-400P with 2 x FXS and 2 x FXO. I'm finding that there seems to be an odd relationship to sound quality on the card to my local when connecting via a SIP client. When I'm on my local network, if I connect to Asterisk via a SIP client (such as x-pro), and dial an outside line through the card, sound quality seems quite good. However, when I'm at a remote

Hi everybody, I have 3 TDM400P installed in a machine,and though the 4 ports of the first card work fine, some ports on the other two have low or no signal and a noise instead. Can someone help? Thanx __________________________________ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/britneyspears/

It is a cable 4-5 meters long that has handssets connected I don't think its a matter of a distance __________________________________ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/britneyspears/

Hey, We are deploying an Asterisk machine in Malaysia for a client. The machine has a TDM400P with 2 x FXO & 2 x FXS. I'm wondering if there are any Malaysian users out there who might be able to help me out with a running zap config for their phone system. Cheers, Darryl.

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

A bit about my experience with the TDM-04 FXO. Only saw a few post on this subject, thought I would contribute a little about my experience to save others the hassle. a. As an earlier poster noted, the driver for the FXO is in the wcfxs module. Perhaps it should be renamed to something less confusing. b. You need the zaptel,zapata libraries from the cvs, the ones with Asterisk 0.7.2 won't

Hi I have had a TDM400p for a year now, recently I have been having problems with 'static' noise completely drowning out a call ( inbound only not on outbound calls)., has anyone else experience this and able to offer a solution. Also on inbound calls for the first 1/2 second or so I get a 'ray' gun sound and a bit of static then the call settles down and is usable any advice

Using a TDM400P in the UK nearly works fine, but I have a last remaining problem in that if the incoming is ringing and then the caller hangs up, asterisk takes another couple of rings before it spots the hangup. This is annoying in that I sometimes get phantom calls late at night (possibly due to call waiting or the exchange doing a half ring to see if we are live). Also I get phantom calls

Hi: I am working on a new system with a TDM-400P card with three FXO modules and one FXS module. The system has been in place for a week. Users are complaining of echo problems. I have noticed this echo myself. It varies in severity. It is sometimes bad enough to make it difficult to converse, but the users find it generally unacceptable. They miss their old phones, which just worked. As you can

Hi I wonder if anyone has any sugestions I have had a TDM400 for a couple of years, and I have always had problems with noise on the line, so tonight I have been doing some research and have found that if I load the CPU dahdi_test has almost perfect results and no noise dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.997% 99.999% 99.998% 99.997% 99.999% 99.998% 99.998%

Hello, I have configured my TDM01B Card (1 FXO Port ) as follows (below) but it will not pick up an incoming call. Any suggestions/tools to see what the problem is? I have looked at zttool where this line changes but I don't understand what it means (The last digit changed from 0 to 1) Total/Conf/Act: 4/ 1/ 1 /etc/zaptel.conf fxsks=4 loadzone=nl defaultzone=nl

Hi, what new Dell servers are compatible and KNOWN to work with Digium TDM cards? I've looked at Digium's compatibility list at http://www.digium.com/index.php?menu=compatibility. Does this mean that other Dell servers like SC1420, SC1425, 800, 1800 are working just fine with TDM cards? Can someone clarify this? Thanks -David

Hi, Have someone there tried the TDM 2400 with 24 FXO? Have had echo problems? or any other problem ? Recommendations? Optional echo cancellation modules are necessary? TIA, Fernando

I have a TDM-400 from digium with 2FXO+2FXS ports. Any idea on how much power will this drain from the 12 and 5 V connector when all ports are in use? -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ ------------ It's most certainly GNU/Linux, not Linux. Read more at http://www.gnu.org/gnu/why-gnu-linux.html . -------------

In reference to an old post from 2002: http://www.marko.net/asterisk/archives/0203/0103.html How does one go about doing this? Also, what is the present status of the OpenSS7 stack in Asterisk? What can it do now? And is there any possibility in the future of developing a DS3 card for it, if only for the purpose of mostly DACSing? Which is still a level of intelligent call control on the

as my first project with *, i would like to replace our old neax2400(sds) with an * server. i've got an X100p and a TDM400 on hand already. for the CO lines, the X100p works ok with fxsks signaling though there are still strange things happening every now and again but more testing is on the way. my real big problem is the DID lines which our telcos call DDI lines; (incoming calls only) i

Hi All, On my * the faxes in- and outbound are of poor quality. I'm missing some lines. I tried different fxs ports, different fax-machines, different cables. Low speed on the fax. Asterisk 1.0.9-BRIstuffed-0.2.0-RC8j Zapata.conf: faxdetect=incoming ; PSTN signalling=fxo_ks relaxdtmf=yes echocancel=no context=outgoing-fax group = 5 channel => 13 Any idees? Johan van Tongeren