similar to: atxfer featuremap

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

I'm wondering whether there's a problem with the blindxfer and atxfer commands. I was using Asterisk STABLE and pressing the # key to transfer calls worked fine, except of course when you called up FedEx and they asked "Enter the number of packages, followed by the Pound key". I found on the wiki (http://www.voip-info.org/tiki-index.php?page=Asterisk+config+features.conf) that

Hi list, This wll be my first post, so I want to thank all the developers for the great product they have created. Now, the question, I have installed asterisk 1.05 on debian sarge (binary package) with an I4l modem and 4 x-lite softphone and 2 SIP hardphones (Yuxin 100) This all works fine, exept for som echo on the ISDN channel, but I'll replace the I4L card with an AVM-C4 card next

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Hello all. Dialing with tT options and function Read (to prompt number) has a trouble for me. Can I temporarily features off during Read? features.conf: [featuremap] blindxfer => ## ; Blind transfer (default is #) atxfer => ** ; Attended transfer I try: exten => s,n,Set(LOCAL(tmp_atxfer)=${FEATUREMAP(atxfer)}) exten =>

I would like to know if atxfer is supported somehow because there seems to be little documentation for this feature. I know most people expect a good SIP/IAX phone to do the job but I think it's nice to be able to do attended trasnfers with a simple ATA-connected analog phone. I have Asterisk 1.2/Freepbx and features.conf has a line regarding atxfer and I set it to *2 (Default). While # works

Hi Is there a way to disable blind and attended transfer during a call. I am trying this configuration but unfortunately with no luck: - in features.conf [applicationmap] disabletransfer => 9*9,self,GoSub(disabletransfer,s,1) - in extensions.conf [incoming] exten => 99,1,Set(__DYNAMIC_FEATURES=disabletransfer) exten => 99,n,Dial(Sip/alice,120,tT) exten => 99,n,Hangup()

Hi folks, I was using the following featuremap: blindxfer => *1 disconnect => *9 atxfer => *2 parkcall => *7 automixmon => *0 and everything worked. Then the need arouse to use some features like automixmon during a conference, but MeetMet has the * key bound to the (admin) menu. Thus, in order to enable features like automon and transfers even during a conference, I

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

Hello. I have a strange problem with the MeetMe application. Configured is a misdn msn to go into a preconfigured MeetMe room. exten => 12,1,MeetMe(1234,pIM) The first caller gets the prompt to enter the pin and then gets connected to the MeetMe room. The second caller gets also the prompt but after entering the right key he hears a dialtone followed by the message: The number you have

Hello all, First of all, let me apologize about the length of this message, but I suppose it was necessary to include the details. I've spent quite some time already trying to get the call transfer function to work on my Asterisk installation. Let me first describe the general situation of the setup I am using, so you might be able to pinpoint the cause of the problem. I'm currently

Eric Wrote: ----------- The trick is not to use options you don't understand. "show application dial" will show you what the t and T options are for. Most people use the transfer feature of their phone, rather than using the T/t hack on the Dial line. Sounds like you are using CVS-HEAD and so will have to configure stuff in /etc/asterisk/features.conf. /Snip/ Eric, Thanks for

Good...it almost works fine! I just have 't' in command Dial, but i also have 'T'. Is it a problem ? This is my Dial() exten => 605,1,Dial(${GIORDANO NAT},60,Ttr) I have only a problem: A and B are speaking, B calls C and ask it if wants speak with A, C accept but if B hang up A is waiting and C get busy tone. To make it works B don't have to hangup but habe to press

Hi folks, I repeat "as is" the title of a post someone did a few months ago, since I am facing the same problem and did not see one single answer to his post. Maybe I'll be a little bit more lucky. When I'm trying to issue an Atxfer AMI command, in the asterisk 1.8 branch, what happens is that some DTMF's are sent, like this : [Mar 22 15:46:27] DTMF[5910]: channel.c:3900

Hi, I am trying to use the attended transfer. So I put this in my feature.conf: [general] [featuremap] atxfer => *0 blindxfer => #0 I completly restart asterik, and not just make a RELOAD. But during a call, when I press # it runs a blind transfer and if I press * I am disconnected. I am using the CVS version of * get as explain here

Hi, I recently moved all of my conf files over to a new Asterisk 1.2.4 server and every works except the features enabled in features.conf. Was there a syntax chnage in 1.2.4? Or is there something else... Here is my features.conf: ******************** [general] parkext => 880 ; What ext. to dial to park parkpos => 881-890 ; What extensions to park calls on context

Hi I have configured attended transfer in features.conf like this [general] parkext => 70 ; What ext. to dial to park parkpos => 00-99 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 300 ; Number of seconds a call can be parked for

Dear All, I have a problem with call transfer. When I dial a number and then I want to transfer current call to an extension, I'm getting disconnected. Transfering incoming call works fine. I'm using macro for dialing. extensions.conf: [from-internal] ignorepat => 9 exten => 200,1,Macro(stdexten,200,SIP/dzalewski) [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})})

I need attended transfers, but I do not have time to talk to another extension and see if they accept the transfer, my features.conf is: [general] parkext => 700 ; What ext. to dial to park parkpos => 701-720 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 220 ; Number of

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf: