similar to: canreinvite = yes with PAP2

Hello, I'm having intermittent STUN trouble. Every one out of perhaps 5 reboots the PAP2 contacts STUN ... on the other attempts it just skips that step all together. I have been verifying this using ethereal which shows the distinctive STUN server DNS lookup followed by about 10 STUN queries (when it works - when it doesn't it skips all that including the initial DNS lookup ...

No, you don't need a sound card. Do you have ztdummy loaded or zaptel device in your system? Regards, Gus ----- Original Message ----- From: "Chris Hariga" <contact@techselesta.com> To: <asterisk-users@lists.digium.com> Sent: Sunday, October 19, 2003 8:19 PM Subject: [Asterisk-Users] Music on hold... > Hi, > > I need a sound card and mpg123 for music on

For canreinvite=yes to work, I think I need to remove the t argument in the Dial(SIP/ext|60|t) application. Otherwise, Asterisk will allways stay in the middle. I don't want that, so I removed the 't' argument. That works. Now, when two UA are calling, Asterisk gets out of the RTP stream. However, when removing the 't' argument, the Music On Hold doesn't work anymore

Can anyone give an example of the difference between the following: canreinvite=no canreinvite=yes canreinvite=update Here is the problem: I have an 800 number sent to me via SIP from a national carrier. Asterisk gets the number and rings my desk phone. Asterisk has 2 NICs, one with public IP and private IP. My phone is on private IP, the inbound call is on public. My phone rings and I answer

Hi, I have been experimenting with NAT and Asterisk a bit now. Though I have made progress along the way, I have come across the following problem. I'll really appreciate if anyone can provide me any help or pointers. Thanks! Successful Scenario: ------------------- All sorts of NAT calls are successful with full two-way media when both end points are locally subscribed users. Problem

I am having an odd problem with a linksys pap2 ata and asterisk... Asterisk won't detect digits from it until I issue a 'sip debug'. As soon as I turn on sip debugging, everything works perfectly (classic heisenbug)! Asterisk is latest Debian 'etch' packaged 1.2.13. sip.conf looks like: [mc_ext01] type=friend secret=ext01 context=mc_ata_in host=dynamic dtmfmode=rfc2833

I have 2 asterisk boxes connected via SIP box 1 sip peer connected to box 2 (ip addresses intentionally removed) [ast20] type=friend host=x.x.x.20 insecure=very context=subscriber dtmfmode=inband qualify=no canreinvite=no disallow=all allow=ulaw box 2 sip peer connected to box 1 [sbb19] type=friend host=64.1.8.19 insecure=very context=inbound dtmfmode=inband

Hi all I am using Asterisk 1.2.2 on frdora core 4. i have two sip UA. if i put canreinvite=yes voice Ok on both sides. and if i change canreinvite=no there is no voice (media through asterisk) one thing more if i try to use playback application for playing some sound file it is also working (like exten => 500,1,Playback(demo-abouttotry) this is working). here is sip.conf

hi all, just wondering what's happening here: i have a pap2 and an spa941. everytime i call my spa from my pap2 i can see it being added dynamically on the regcontext: [Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer 100100 [Oct 7 11:59:08] -- Added extension '100100' priority 1 to sipregcontext but from spa to pap2 i dont see it, i looked

Should the following setup work? SIP UA---NAT---Internet---NAT---SIP UA If both UA's support STUN and report the external IP address in the SIP packet.. I am trying to get away from using canreinvite=no so that traffic can go directly between the UA's and not via the central server but I can't seem to get it to work.. Has anyone set this up and can give me some pointers??

Hi, I'm using opensips as the registrar server for my users. I am redirecting calls going out to pstn to my asterisk server. call flow is basically: ua --> opensips server --> * server --> sip gateway provider if (uri=~"sip:00[0-9]*@sip\.myserver\.com") { xlog("L_INFO", "Call to PSTN\n"); #strip(2); #prefix("011");

I'm having a real problem with one of my linksys pap2. On outgoing calls the callee will ring, but caller (pap2) will not here it ring When the callee answers, no audio is transmitted either way. Asterisk reports the call connected and bridged correctly. Now the kicker is that sometimes it works and other times it doesn't. I have had the most luck calling land lines, but sometime

(Im' answering cc the list, so the knowledge keeps there, and maybe some more qualified answers become). Am Mittwoch, den 15.10.2008, 18:00 -0700 schrieb Francisco del rosario: > Hey Rodolfo... Need some help from you ... > I need to know what hardware do I need to make SIP calls if I set-up > asterisk > So the situation is that I have a PC and configure the software of my PC to

Hello. I have an * server set up on a public IP. I have SIP clients at three different locations, all behind NATs. I have all the SIP users set up this way: [user1] type=friend username=user1 secret=password1 callerid="User 1"<101> host=dynamic qualify=yes context=outgoing All three SIP clients are configured to use STUN (using stun.fwdnet.net:3478). Furthermore, I have

Hi all, I am trying to use canreinvite in sip.conf and park/pick up calls at the same time. Problem: When I have it set up so RTP goes through asterisk (sip.conf: canreinvite=yes), # to xfer works fine. But, when I set it up so the RTP goes direct between endpoints (sip.conf: canreinvite=no), the # to xfer doesn't work. I believe this is because asterisk isn't in the RTP path and

2009/2/5 Olivier <oza-4h07 at myamail.com> > Hi, > > Here http://www.voip-info.org/tiki-index.php?page=Asterisk%20T.38 is a > table listing ATA/Gateways combinations. > Could anyone successfully set a Patton M-ATA to work with another one, > using Asterisk 1.4 ? > > Is reinvite (canreinvite=yes) necessary or not ? > > Regards > > Replying to myself, I

Hello, I need to test canreinvite=yes with 2softphones and 1 asterisk. I want to have that : http://www.panoramisk.com/wp-content/uploads/2007/05/asterisk-call-flow-outb ridge.png But I have that http://www.zimagez.com/zimage/canreinvite.php Canreinvite=yes work for all phones or just asterisk?... Can you help me? Thank you -------------- next part -------------- An HTML

Here is some info that may allow some "locked" PAP2 and PAP2-NA units to be used with Asterisk: I have a PAP2-NA (from a provider other than Vonage) for which I did not know the admin password, though the "user" pages were accessible to me. The provider had set it up to fetch at startup, its configuration file by HTTP from a numeric IP. It was running 2.0.10(LSc). A search

Am I reading the data below incorrectly, or does it appear that even though I have the directive canreinvite=no set for the two asterisk boxes, they are trying to do a reinvite (which fails) anyway? Is this expected behaviour in this situation? If so, how can I prevent this? ---- Lots of output ---- Using CVS Head from 2005-08-28, I have two asterisk boxen, one (box A) has a sip ua (2608)

Is AbsoluteTimeout designed to work with canreinvite=yes? If not, are the any other options for disconnecting a call after a predefined duration when using canreinvite=yes? Thanks! David