similar to: Return code of txfax

Hi all, Can someone share with me his experience in making asterisk-oh323 talk to quintum gateway without gatekeeper. My set up is QUINTUM GATEWAY ------IP----M ASTERISK (OH323) Both are gateways.. but I don't know what authentication I will set up in oh323.conf and how to set it up I will be glad if anyone can help Goksie

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is to send all my call to the pstn on A104D? The pstn am

Hi, To solve echo problems, I'm considering 2 alternatives. 1> Sangoma A104d - I can't find support for asterisk 1.2.1 2> Desktop echo canceller - http://www.oriontelecom.com/echo_canceller/desktop/e1_ec_desktop.html - I want to know where to buy and price. Any suggestion is appreciated. Thanks. Jason. p.s. : asterisk cli command "reload" can change rx_gain and

hello all, I am looking for an implementation of a 10 man call center. low cost license or GPL will be preferred. I will be glad for your help. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160622/8e2e5ab8/attachment.html>

Thanks Mitul, The server spec is okay but I need information on the fxs hardware to use. Regards On Wed, Feb 17, 2016 at 8:07 AM, Mitul Limbani <mitul at enterux.in> wrote: > Quad core Xeon with 4GB ram > On Feb 17, 2016 12:32 PM, "Goke Aruna" <goksie at gmail.com> wrote: > >> Hello all, >> Can someone recommend what hardware to use for a 1000 analogue

Hello all, I have a set up that answer my customer. and its working well, however, the number of call to technical dept is what i want to reduce. I want all call to get to voice prompt except that that enter when minutes is 15, 30, 45, 60(in multiples of 15 minutes). how can i achieve this and what application can i use to get this done. I will be glad, if someone can give me a hint on this.

Kai, Thank you for the reply. I didn't want to bother the list too much. However, after reading I discover I don?t have a clear cut way of doing transcoding. Can somebody direct me to where I can get document to get this transcoding done. My set up >From [cisco (g729)] ----> [asterisk (sip channel(g729)within the same asterisk) g711 to chan_ss7] -----> [pstn] And vice versa. I

Hello all, Can someone recommend what hardware to use for a 1000 analogue line capacity asterisk PABX? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160217/2bcd322f/attachment.html>

I'm attempting to setup Asterisk 1.4.0 CDRs to use MySQL. Modules show like cdr_mysql.so tells me it is loaded. Reload cdr with MySQL started or stopped makes no difference in the errors. Ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070220/55700f37/attachment.htm

can someone overthere help? the server specs are as follows HP DL380G4 Dual Intel Xeon 3.2GHz processor with 4GB RAM, running fedora core 3 asterisk-1.2.5 ss7-0.8.3d. using sip as advised to receive calls from another gateway in US. using g729 in transcoding way. however, I noticed the call hit the 51 active calls which is 102channels, I run "top" to check the system resources usage

Thanks Harry. I will check and revert. I hope it work perfectly with asterisk. Regards On Wed, Feb 17, 2016 at 8:32 AM, Harry McGregor <hmcgregor at biggeeks.org> wrote: > Hi, > > For analog, I really like telco grade channel banks. > > I would recommend the adit 600, there is a good market on Ebay, and you > can do 48 channels per adit 600, with 2 T1 interfaces. Having

Hello all, I have a set up that answer my customer. and its working well, however, the number of call to technical dept is what i want to reduce. I want all call to get to voice prompt except that that enter when minutes is 15, 30, 45, 60(in multiples of 15 minutes). how can i achieve this and what application can i use to get this done. I will be glad, if someone can give me a hint on this.

On May 16, 2016 22:15, "Telium Technical Support" <support at telium.ca> wrote: > > You don't mention a configuration generator (like Elastix/FreePBX) so I'll > assume you are using a plain old vanilla Asterisk installation. In which > case all user/endpoint information is kept in config (ini) files, and no > user/endpoint manipulation is done through the

Hi I have created a rudimentary perl script that does most of what I want but occasionally in seems that a file will not play. I see the message getting sent to Asterisk but no reply to say that it completed. In fact, the very next SAY DATE command works and everything after that but the previous message seems to be ignored. In addition, I found in one case that I had to read to STDIN

hi all, can anyone give me a guide on any asterisk admin solution / interface for config management, and monitoring? No database use is intended and I prefer open source. Thanks for support. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160516/98f6e448/attachment.html>

Hi, I noticed a strange behaviour: Faxing using spandsp (TxFax) from my asterisk box to my old, common fax machine at home works fine. Faxing from the same box to my office pc-fax (Hylafax) also worke fine. Receveiving faxes on my asterisk box using spandsp (RxFax) also works fine. It is a PSTN number connected to the digium card of that asterisk box. Then I faxed from my asterisk box (TxFax)

hi, I am installing the asterisk-1.2.19 with zaptel-1.2.8 on FC5. I got install installed ok.. after i had disable the xpp_usb module. However, when i try to compile asterisk and having this error I will be glad for your kind response. Goksie "chan_zap.c: In function ?pri_dchannel?: chan_zap.c:9203: error: ?pri_event_setup_ack? has no member named ?call? make[1]: *** [chan_zap.o] Error

Can someone guide me on what package I can use to do least cost routing in asterisk-1.4 without going through the prepaid calling card platforms. I have tried Asterisk::LCR and LCDial without success, if more help on either too. I will be glad. I will be glad for good pointers. Thanks. Goksie

Hi all, Can somebody help me out, to get the call going through to my provider? I connected my A104D Sangoma card to E1/isdn and each I tried to make call I get the errors below. My protocol analyzer can see only setup info and release complete. WIRELESS2*CLI> set debug 9 Core debug was 0 and is now 9 WIRELESS2*CLI> pri intense debug span 1 Enabled EXTENSIVE debugging on span 1 T203

hi, i'm testing asterisk 1.4/1.2 in the following scenario centos5/cpu quad xeon E5335 2.0Ghz - test clients behind nat - 1500+ testing instances - reregister option from 1min to 1hour - qualify set to 5000 top shows over 100% cpu. cpu cores sometimes go to 95% with htop i see ~16threads but only one child have ~95% cpu (how i can get info about that thread? what he is doing?) what is