similar to: How to use * and # as part of number in dialcommand

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

Hi all, I am struggling with the following and I can't get it work: In the Netherlands where I live it is possible to use special codes (aka vertical service codes) to set special 'behaviour' of phonecalls. So e.g. when I want to dial out with a normal phone and I dial *31*<phonenumber to dial> then it will turn off my numberindication (CID) at the called party. They seem to

What is CFU and CFNR? > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Michel Koenen > Sent: Tuesday, August 30, 2005 1:46 AM > To: asterisk-users@lists.digium.com > Subject: RE: [Asterisk-Users] How to use * and # as part of > numberindialcommand > > > From: "Damon

What would be the simplest way to retrieve information form a CNAM database that provides http based query responses? Does an application or script already exist that does this? Basically, I want to do a wget of a URL that contains the callerID number as a variable, and assign the returned text to another variable which can be used to set the caller ID name. Any suggestions?

Hello all I'm trying to get my asterisk config to listen to multiple ports. This is since some clients have port 5060 blocked by their ISP. Does anyone know how to do this in sip.conf or if it is even supported? Thanks!

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

In the real world (or at least in my world) we use undersubscribed internet connections that come with a service level agreement (SLA) that guarantees that the jitter, delay, and packet loss with be within defined parameters in the service agreement. With most DSL and Cable you will not get a SLA, with the cheapest T1s you might get one, but the only penalty to the ISP if they do not meet is a

This has been an interesting discussion for me (except for the sniping). The last post led me, out of curiosity, to this wiki entry: http://www.voip-info.org/wiki-Asterisk+TDMoE I was unaware of this feature, and it looks pretty good. I've been pondering replacing some T1's by leveraging IP capacity but of course have run up against the QoS issue. My idea was different... I

I have added the following to a macro that is used for all extensions so a user can access voicemailmain by pressing * during the voicemail prompt ; check voicemail exten => a,1,voicemailmain(${macro_exten}) exten => a,2,hangup The behavior is a little weird, the * key is not recognized during the portion of the greeting where the extension number is being played back, after it is

Can anyone shed some light on "rules" that might make the task of parsing the country code and city codes from a dialed number in the CDRs? I know that there is almost never a case where a concatenated country and city code could overlap with another country code, but what about city codes and local numbers? Is it possible for a concatenated city code and local number to match another

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an

Hi, I want to know how I can get a value from a table. Say, I have a table sip_buddies for storing sip user account information. There is a field called 'accountcode' that I want to get its value in the dial plan. As I find that there is no direct way to get the value from the table. Does anyone can tell me how can I get its value in the dial plan? Thanks!

Anyone know how to override the 99 message limit in voicemail? (yeah, we have a public VM that gets that many a day). -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050812/1bff12e4/attachment.htm

Can anyone point me to a reference or sample config for bypassing a nailed up (point to point) t1 between two PBXs with asterisk and a pair of t1 cards? Right now I have 2 Nortel norstars connected to each other via a leased line t1. I also have a solid 10mbps low latency microwave link between the 2 sites. My goal is to run an asterisk box at each end with a t1 card and Ethernet card to

Has anyone had success with the Snom 190 displaying caller ID name and number on the Snom 190 on for an inbound call from *? Right now our Snom's only show the caller id name, not number. I know the number is transmitted from the Telco and received by * since the number shows on the incoming call event at the * console. We are not setting the caller id in the extensions.conf, simply passing

Anyone know of any equipment that I can use to connect a laptop running asterisk to a POTS line (RJ11) ? Regards, Dovid __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Can anyone point me to a sample or information on using MeetMe like this? Conference room is set up with 2 PINs, one for the moderator and one for the participants. Participants get music until the moderator joins (to avoid wild, un-moderated tangents). Call is ended and all participants are kicked out when the moderator leaves (or the moderator can kick everyone out via phone keypad).

Just curious... Does anyone know if any companies using Asterisk on embedded hardware (out at the customer premisis), such as the Soekris Net4801, to provide VOIP service? Doug.

Does anyone know what date this memory leak was introduced and/or how to check source code for it? I am running a pre-1.2 CVS head version and would like to know if the potential problem exists. > -----Original Message----- > From: asterisk-announce-bounces@lists.digium.com [mailto:asterisk- > announce-bounces@lists.digium.com] On Behalf Of The Asterisk Development > Team > Sent:

Is there a clean way to disable music on hold for a specific user sip user? I have seen one example that creates a class called [none] that points to an empty directory, which creates log errors that are annoying (but not harmful?) -------------- next part -------------- An HTML attachment was scrubbed... URL: