similar to: Sip pickup

I have an ISDN line with 10 numbers. The line is then connected to * with one HFC-based card. The format of the numbers is like below: 123456-0 123456-1 ... 123456-9 Now I would like to connect those numbers to different telephones, i.e. when someone dials 123456-0, he/she is connected to the digital receptionist. If someone dials 123456-2, the connection goes to SIP/202 If someone dials

Hello, I've been trying to figure out if it's possible to replace Active Directory with Samba (+ OpenLDAP, Kerberos, DNS etc.) on Linux - but from what I've found I'm not sure. Is it possible, or partially possible (I don't need every feature of AD)? What additional software (besides Samba) will I need? What functionality will I loose? Where can I find any

Hello, I have a following test environment: 1) Samba PDC + OpenLDAP Slave (192.168.1.2) 2) OpenLDAP Master (192.168.1.1). Whatever is changed/added on the Master, it gets replicated to Slave. Now, when a user is logged in, and tries to change the password - he/she must supply the old password, and twice new one (normal behaviour). After pressing OK the user is said that the password

Hi, Does anyone have some experience with Nokia 32 Terminal (it is an analog GSM Gateway)? After a configuration I can make only incoming calls, I'm not able to do any outgoing. Nokia signalize an error (4 short tones), when I try to phone someone. I tried postpaid simcards as well as prepaid simcards with the same result. Does anyone try to connect this gateway to Asterisk PBX if so what

I have multiple voiceage g729 licenses installed on a RH9 box, and have a remote C7960 configured to use it (low bandwidth). In calls like: Remote C7960 -> g729 -> asterisk -> g711 -> C7960 the audio is oftentimes rather choppy. Changing the remote 7960 to use g711 seems to eliminate/reduce the choppyness. Any ideas on what might be behind this?

pstn -> sip gw -> * -> C7960 When I dial into * via the pstn, I hear the ivr menu just fine (good quality). I press 3000 (valid extn), and I begin to hear ringing however the ring back is very very choppy. I answer the C7960, and speech is clear in both directions. Place the C7960 extn on hold, and the MOH is very choppy. Checking 'sip show channels' indicates both the sip gw

Using the following defnitions with a C7960: exten => 3001,1,Dial(SIP/3001,15,r) exten => 3001,2,Voicemail2(u3001) exten => 3001,102,Voicemail2(b3001) exten => 3001,103,Hangup If someone is on this phone (real conversation) and another call comes in, the second call goes through the 15 second timeout and is dropped into the 2-priority as "unavailable" (not the 102 busy as

(Apologies to those Toronto Asterisk Users' Group folks who have seen this message... I figured I'd have more success with a wider audience) I'm trying to boot a Cisco 7960 from an ISC DHCPD server (3.0.3 on FreeBSD 4.11), so far unsuccessful, and getting some odd behaviour on the wire. I wonder if anyone has done this before and therefore can validate whether or not the traffic I am

Hello, I am trying to setup an Asterisk GUI with the help of astman(please visit http://astman.sourceforge.net/am-user-guide.html). I have installed astman and currently assessing my GUI using; http://ipaddress-of-asteriskbox/cgi-perl/am-main.pl I am trying to get the menu options in my GUI to work but to no avail. Currently my parameters are set to; Asterisk Install Directory:

Two asterisk boxes 150 miles apart, both cvs-head as of this morning (and since Sept 27th), connected via iax2 with low-utilized ds3 internet, C7960 calls exten on remote system (also C7960), and call goes to VM. No other calls in either system (eg, no load). Both boxes have iax config'ed as: trunk=yes allow=ilbc jitterbuffer=yes Recorded VM messages are very distorted. Changing only

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

Hello, I'm trying to set up Samba + OpenLDAP as a PDC. I followed the instructions from chapter 6 in Samba-3 by Example, my system is SuSE 9.1. ldap, winbind, nmb and smb are running. testparm says my smb.conf file is OK. I set LDAP password using smbpasswd -w. There was a similar post a few days ago (smbldap-tools don't create machine account properly), but it didn't help me.

Someone recently posted the following list as functions built into * *0# sends flash *8# remote call pickup (pickup phone in your group) *67# disable caller id *70# no call waiting *78# do not disturb on *79# do not disturb off *72# enable call forwarding *73# disable call forwarding *82# enable callerid I'm running a CVS from a couple of weeks ago with multiple C7960's, snom 200,

Hi, I've been struggling with this for a quite long time. Maybe I am not the first asterisk user with this problem, (I try to search on google, but I didn't find anything good). My point is: I try to set up * to work as a fax server. Each incoming fax (from PSTN) should be received on email. Luckily it works. I didn't notice any problem with receiving faxes on email, so rxfax works

I'm about to download Festival source, apply the astrisk diff's, and initiate basic testing. Thoughts are to download v1.4.3 (latest per the fesitval website. If anyone has an existing how-to, install notes, tips, or any suggestions I'd greatly appreciate it. Direct email is fine if you'd rather not post them. Thanks, Rich radamson@routers.com

Are there open problems/issues with iax2 and jitter (quality)? Just upgraded to today's dev cvs about an hour ago, and it seems the iax conversations are lower quality then a month or two ago. iax2 show firmware says version 13. (Test call originated from C7960 with g711.) Using the demo as an example, iax2 show channels Peer Username ID (Lo/Rem) Seq (Tx/Rx) Lag Jitter

I just started service with Broadvoice.com and everything seems to work. However, apparently my understanding of incoming sip contexts is less then what I thought it was. Could someone point me in the right direction? (* on a public address, CVS-HEAD-07/12/04, C7960 phones) In my sip.conf I have: [general] port = 5060 bindaddr = 0.0.0.0 allow=ulaw tos=0x18 ;sets ip tos bits (=lowdelay and

Hi, I have tried both RC4 and from the repository but I can't seem to get samba4 to compile. I have rebuilt the OS (Centos 6.3) from scratch and I am still having the same issue. I get: WAF_MAKE=1 ./buildtools/bin/waf build Waf: Entering directory `/opt/samba-master/bin' Selected embedded Heimdal build [ 133/3978] Generating VERSION [ 168/3978] Generating smbd/build_options.c [1815/3978]

I am having problems in a couple of installations where I have SIP phones (both GS101 and ATA186) connecting to an asterisk box that has a public IP address, where the stations are behind NAT. I'm still testing to make sure I have all the permutations looked at, but from what I can tell, what is happening is that in situations where stations behind the NAT call out, no audio is passed

My ADSL connection speed is 512Kb up and 128Kb down. When making calls from Asterisk to IAX and back to the Asterisk, the sound is choppy and 20% of voice messages was lost. What is the production bandwidth requirement per internet call. I understand there is no guarantee of QoS but at least a benchmark to follow. -- David Kwok Iaxtel/FWD # 17001813482 -------------- next part