similar to: Nortel Meridian-1 Line Side E1

Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel Release 11. I need to connect both of them. We are using MFC/R2 for this.. The Diagram: [ NORTEL ] ( AMI ) ------------------------------------------------ (DIGIUM) [ ASTERISK] we have green light at the digium card, and at asterisk we see all 31 channels as idle. But when i want to recive a call from the Nortel to the

Hi List, I'm trying to connect Asterisk with a Nortel Meridian using an E1 with MRFR2 signaling. I've connected both cards, and compiled all the required software... The problem is every call (outgoing or incoming) got dropped, complaining about some "T1 timed out" Only for testing purposes I'm using an application called testcall included on the lib-unicall package, and

Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel Release 11. I need to connect both of them. We are using MFC/R2 for this.. The Diagram: [ NORTEL ] ( AMI ) ------------------------------------------------ (DIGIUM) [ ASTERISK] we have green light at the digium card, and at asterisk we see all 31 channels as idle. But when i want to recive a call from the Nortel to the

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Hi all, I have asterisk 1.4.26 (and I tried 1.4.29) connected PRI all 23 lines and for the most part everything works. Dialing out on 23 lines to phones works fine. I have to use the Local channel to call the intercom system (from call files). If I only call 1 intercom system at a time so it uses DAHDI/1 everything seems to work as I can call all 8 intercom systems and play a message. The

Hi everyone! I'm having some issue trying to place calls with asterisk connected to an E1 R2 from Telmex Argentina. The other E1 port is connected to a Meridian which also uses R2 protocol. Calls sometimes fail with different error messages such as: Unicall protocol error 32773, 32772, 32769. Some other calls fail saying: Far end disconnected(cause=Destination out of

Hi, Some time ago, there was a discussion about the inability of nortel meridian pbx to dial analog tones thru an meridian ATA, and the work arround was to enable 808 function that makes the dtmf tones long for the current call. The nortel meridian is connected via a nortel ATA to a TDM400 to a FXO port. Anyone can say me who to actually use that function (you dial something or is pbx

Hello all, I have Asterisk 1.2.1 and a TE110P connected to a Nortel Meridian Option 81C system. The PRI line is currently setup as DMS100. Here are the relevant lines from zaptel.conf and zapata.conf: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone = us zapata.conf: [channels] language=en context=from-internal musiconhold=default switchtype=dms100

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

Hi list, any one can let me his config files for interconecting a Meridian Op 11 and Asterisk via a E1 PRI CARD. Actually i need the nortell config part, becouse my client nortell provider doesn't know how to config the PRI card at his part. Thanks all. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, What version of asterisk and zaptel are you using? I've used digium TE110P card with mfcr2. I had same "T1 timed out" problem too. I've asked from support and got answer to install latest zaptel. I've installed zaptel 1.2.13 and it solved. In short try latest asterisk v1.2.x packages with unicall. >> Hi List, >> I'm trying to connect Asterisk with a

I try to integrate my old PBX Meridian and Asterisk througth a PRI T1 (I'm gonna use only the asterisk voicemail system) but i don't know how to integrate the MWI protocol between Asterisk Voicemail and my Nortel meridian. Anyone know what i have to do for that.? Any idea is appreciated. Regards. Cristian. _________________________________________________________________ Don’t just

[Reposting, as was bounced for non-member, sorry if this is a dupe] Arrangement: { PSTN }--E1--[PBX]--E1--[*]--LAN--[SIP phones] \__[PBX system phones] Normal calls between PBX system phones and SIP phones work, in both directions. The call logs look like (ignore the no answer, it did ring):

We have a client with a Nortel PBX with digital phone sets. Due to T1 problems (old firmware), we are interested in trying a FXO channel bank. Is there a channel bank (or equivalent) which emulates Meridian digital phone sets? In order words, an FXO channel bank that's Meridian digital? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a couple of questions I'm hoping folks can help me out with. When I search the mailing list, I see folks doing what I'm interested in so here's hoping ! - How are people making out with interfacing to the 7960? I'm considering buying a number of these as they look quite feature rich. But, are they easy to interface to? - Will I be able to interface with softkeys on

Has anyone integrated Asterisk for Voicemail with a Nortel Meridian phone system or know if this could be done? Thanks, John Haigh

I've tried to do it myself, but my head is now bleeding from hitting it on the wall so much. We need someone who knows asterisk and Meridian PRI cards to help! If required, we will pay for a day's consultancy in order to get this thing working. Or, do I need to scrap my plans to keep the meridian system (60 phones ...) ... Please say no .. :) Please contact me offline

----- Original Message ----- > Ooooh, I've got it working a treat, thanks to some great help from people on > this list. I *am* currently writing up a how to, and will post it as soon as > I'm done. > > Basically, take the line from the meridian, and chop the rj45 off. (!) put > another RJ45 on, but with the wires crossed (IOW a cross over cable). Plug > the meridian

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME