Displaying 20 results from an estimated 1000 matches similar to: "RE: Pannel"
2005 Aug 17
3
FW: Asterisk-panel
I am running asterisk at home but have a strange phenomena that is going on
with my flash panel I am using two ips an internal and an external public ip
address on my box. If I go to the page on my asterisk external ip address
the displays the flash panel everything is fine, but on the internal ip wich
used to display the page correctly all the names of my panel users is there
but the panel just
2005 Aug 18
1
pins for users
Hi im using asterisk@home with 30 phones and 50 users, I want the users to
utilize pins when making external calls asterisk supports this, but I want
to take this one step further I want each user to have his /her own pin that
is connected to the mysql databases so in the monitoring system I know which
user used which phone and what number they have dialled, and if they don't
have apin they
2004 Dec 03
1
FOP Asterisk Manager Login Failed?
Hi -
I've told lots of people about the Flash Operator Panel before, but
I've never actually used it myself. I've got it all set up nicely, but
I can't seem to authenticate to the asterisk manager (which is running
on the same box). When I set the op_server.pl to give debug messages,
it shows that it can reach the asterisk manager, but cannot
authenticate:
** Asterisk
2010 Jul 22
5
[AsteriskNow] Errors with clean install (on main screen when making calls)
Hi there,
We did a clean install the AsteriskNOW 1.7.0 64 bits ISO and configured it.
On the main screen (Crtl-ALT-F1) we keep seeing the following lines when
making a call
Use of uninitialized value in hash element at /var/www/html/panel/
op_server.pl line 3367.
Use of uninitialized value in concatenation (.) or string at
/var/www/html/panel/op_server.pl line 3372.
Use of uninitialized value in
2006 Mar 29
1
OT: FOP and reverse_transfer
When I drag and drop a call from the PSTN to a SIP phone (the SIP phone's
icon) using FOP .25 with * 1.0.9 with the intent of transferring it, the
called party gets transferred rather than the calling party. This is
controlled by the reverse_transfer parameter in op_server.cfg but the
behavior is exactly the same whether the parameter is set to 0 or 1. This is
after the call is picked up by
2005 Jun 22
3
flash panel only works with IP address
Hi,
It seems that my flash panel only works when I specify my ip address and
not the host name.
I've tried quite a few things (change host file, dns resolve,
proxying....) but couldn't get it to work.
Anyone knows how to solve this?
Thanks,
Ohad
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2010 Jun 06
1
Error of FreePBX after installing from Yum Repository of Asterisk
Hi Guys,
Just did an Asterisk 1.6.x (repo install) and FreePBX (source install). When
trying to dial a number, I get this:
tel*CLI> Use of uninitialized value in hash element at /var/www/html/panel/
op_server.pl line 3367.
Use of uninitialized value in concatenation (.) or string at
/var/www/html/panel/op_server.pl line 3372.
Use of uninitialized value in pattern match (m//) at
2006 Feb 16
2
Install instructions for FOP Flash Operator Panel do not make sense...
Hi,
Anyone got AFOP working. The install instructions tell you to copy all
of the files extracted under the 'html' directory to a subdirectory
under your main web directory (in my case this is /var/www/html/panel/)
and then the instructions talk about modifying the 'op_server.cfg' file
but they do not tell you were to put this file. There is something wrong
with the
2005 Mar 01
1
Problems Starting Asterisk - FOP AM Portal
Hello All,
I'm new to the list and the whole voip server side. I'm trying to setup
Asterisk to just do internal dialing, no access out to the pstn is
required/wanted at the moment.
I'm running Fedora Core 3 with Cisco 7960's phones (running SIP 6.3).
I've set it up following these guides:
http://www.voip-info.org/wiki-Asterisk+Fedora+Core+3
2004 Apr 08
0
RE: Asterisk-Users digest, Vol 1 #3368 - 12 msgs
This message is in response to Flash operator problem. My op_server.pl seems to be same. I also created the variable.txt to the /var/www/html/panel folder and when I run htt://192.168.0.0/panel it just says at the bottom transferring data. I don't see anything on the screen.
I also checked my manager.conf file. I was able to telnet into the manager interface and it's running fine.
So I am
2005 Mar 21
1
Flash pannel: time display
I have three different time displays:
Flash panel caller 615 48:00
called 620 58:18
Snom phone shows for the same call 47:55
Why is there a difference at all?
bye
Ronald
2006 Feb 07
1
AMP 1.10.010 Config Problem
I have a fresh install of AMP. In the AMPortal, Setup, Devices or Users, I
get:
Cannot connect to Asterisk Manager with user/password (set respectively)
This module requires access to the Asterisk Manager. Please ensure Asterisk
is running and access to the manager is available.
I checked /etc/amportal.conf, /var/www/html/panel/op_server.cfg, and most of
the conf files in /etc/asterisk/
Am
2007 Mar 27
1
"Couldn't load variables.txt?aldope=xxxxx "
HI!!!Sorry this post about FOP but it's important.
Ive installed asterisk and freepbx. the interface of FreePBX works
fine, but when i acesse FOP
(Flash Operator Panel) i get this error: "Couldn't load
variables.txt?aldope=xxxxx "
I search in the google and see a sugestion to edit line
flash_dir=/var/www/html/panel/flash in file op_server.cfg.
Any Sugestion please?
--
2009 Feb 23
1
Flash Operator Panel with Asterisk 1.6
Hi,
I know this is not a 100% Asterisk question, but is there anyone who has the Flash Operator Panel working with Asterisk 1.6??
In asternic.org there is a version that show call status but you cant make transfers or originate a call.
Has anyone fixed the op_server.pl file to fully work with Asterisk 1.6???
Thank you very much, Pablo Bernasconi
-------------- next part --------------
An HTML
2006 May 09
3
Announcement: FOP 0.26 released
I'm pleased to announce that Flash Operator Panel 0.26 has been released!
FOP is a GPL'd switchboard type application for the Asterisk PBX. It
runs on a web
browser with the flash plugin. It is able to display information about
your Asterisk box in real time. It is included in FreePBX,
Asterisk@Home, DeStar, startShop, and several other projects both free
and commercial. You can grab the
2005 Aug 29
1
Call waiting setup/Confenencing problems in AAH
Hello
I have couple issues with AAH. 1.5
1. Flash panel doesn't show proper status. Sometime accessing with IP
seems to work and it shows current line status etc. Sometimes accessing
with hostname of the asterisk server seems to show lines, but it doesn't
show off hook etc when we pickup a extension and talk.
In /var/www/html/panel/op_server.cfg I have tried setting manager_host
to all
2010 Sep 23
0
Installing Asterisk + FreePBX from Repsitory spits out some warnings and errors for ever
Hello,
This is what what I see after a Yum install asterisk16 asterisk16-config
freepbx:
Use of uninitialized value in string ne at
/var/www/html/panel/op_server.plline 4997.
Use of uninitialized value in substitution (s///) at /var/www/html/panel/
op_server.pl line 5439.
Use of uninitialized value in substitution (s///) at /var/www/html/panel/
op_server.pl line 5440.
Use of uninitialized value
2006 Oct 05
2
xyplot
Hi,
for the data below:
time<-c(rep(1:10,5))
y<-time+rnorm(50,5,2)
subject<-c(rep('a',10),rep('b',10),rep('c',10),rep('d',10),rep('e',10))
group<-c(rep('A',30),rep('B',20))
df<-data.frame(subject,group,time,y)
I'd like to produce a plot with a single pannel with two loess curves one
for each group. the code below does
2006 Nov 15
2
safe_asterisks pawning multiple asterisk process???
We have 1 server that after a few hours operating has multiple process
of asterisk running. Here is the pstree output:
# pstree
init-+-atftpd
|-auditd---{auditd}
|-bash---safe_opserver---op_server.pl
|-crond
|-cwASTcall.pl
|-dbus-daemon
|-events/0
|-hald-+-hald-addon-acpi
| `-2*[hald-addon-stor]
|-httpd---3*[httpd]
|-khelper
|-klogd
2006 Mar 29
3
FOP flash panel: how to reload config files when running
Hi,
is it possible to force FOP to reload its configuration files
(op_buttons.cfg and op_style.cfg) while it is working? I tried to click
on the refresh icon but nothing happens.
TIA
Giorgio Incantalupo