similar to: CAPI problem - need help

Hi, I would like to implement a inexpensive home PBX with Asterisk. I have an internal ISDN bus with 6 ISDN phones. I now thought, I connect a Fritz card to my Mehrgerateanschluss (Point-to-Multipoint) supplied by my provider and a second Fritz card to the internal bus. Will this work? Thanks for the help, Arik

Hi, I have switched a while back from chan_capi to chan_misdn. When the number is dialed and the phone is then picked up everything works just fine. Some users however FIRST pick up the phone and then start to dial... I did not get this to work with misdn. When two digits have been dialed, asterisk sees the extension as complete and does not wait for further digits. I am using an midsn NT

Hi everybody. I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7 My linux is a debian. It was working during a few days an suddenly (after a lot of reboot) I've got this error message that seems to be very popular but I couldn't find any answer on the net : ==============================================. Asterisk Dynamic Loader Starting: == Parsing

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello together, I am setting up a communication server which should also act a very-low-load PSTN gateway. I am usiing a AMD K6 200 running from a 500 MB usb memory stick. What is the ABSOLUTE minimum space requirements for ~ running asterisk to work as gateway between isdn and lan? 50MB or 1 GB?(I would compile, configure, etc. on a separate machine

Hi, I've a Fritz card which was working fine, recently I changed hardware and my nightmare started. Now when I call someone through the chan_capi (0.3.5 or 0.4.0) it works fine but when I receive calls I always get hungup. Can someone please give some help? Here are the logs: *CLI> -- CONNECT_IND ID=001 #0x0000 LEN=0049 Controller/PLCI/NCCI = 0x101 CIPValue

hi, I have dabian sarge with asterisk 1.0.7 and chan_capi 0.3.5 with AVM fritz card. I would like use detecion of fax, but it don't work. So, i would like know if it's possible to work fax detection with this card? And if it's possible how?? Thanks you for your help

Hello, While upgrading * from 1.0.9 to 1.2.5, I have installed chan-capi-head and I can't start asterisk under asterisk group "asterisk -vvvvgc -U asterisk " and "asterisk -vvvvgc -U asterisk -G dialout" work well but "asterisk -vvvvgc -U asterisk -G asterisk" fail. I am thinking about a group permission configuration but I have exactly the same one

Hello configuration as follows, dial-out works: capi.conf: [hfcpci] ;;PointToPoint (55512-0) isdnmode=MSN incomingmsn=* ;msn=61 controller=1 devices=2 context=incoming extensions.conf: [incoming] exten => _XX,1,Playback(demo-abouttotry) exten => _XX,n,Dial,SIP/xlite1 exten => _XX,n,HangUp When call is placed, the following debug info is shown, after the last line, it stalls until

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

Hi List, I'm having a problem with detecting incoming dtmf tones with chan_capi, using an AVM Fritz card. I have set up softdtmf and relaxdtmf, both to 0, expecting that the capi module will detect the tones, but it did not. I also set both to 1, expecting that the asterisk dsp functions will detect them but it did not either. Can anyone provide any ideas how to overcome this issue?

Hi, I was successfully using VoIP Buster via IAX2 for several weeks now. Yesterday/today it spontaneously stopped working. Using the "real" client the connection works well though. Anybody else experiencing this problem? Or asked differently: Is there anybody for whom it is still working? Can anybody tell me what the problem could be from this: -- Executing

Hello Armin, hello List I'm trying to get chan_capi working with asterisk from debian stable (asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2). I managed to get it compiled by providing my own version of ast_copy_string. This is an Austrian PTP line. I can do outgoing calls fine (no comprehensive tests yet). For incoming calls, I'm getting "No answer" on the

Hello all, I'm having problems getting chan_capi 0.3.5 to work well with an Eicon Diva Server card using using the driver from linux kernel both 2.6.10 and 2.6.12 (vanilla versions). I have a (really two) producci?n system(s) running chan_capi in another identical Eicon Card using kernel 2.4.27 and the Diva Server drivers from Eicon. I installed an compiled the source level rpm

asterisk-users-request@lists.digium.com is believed to have said: >chan_capi does not set the NT-mode. Your cards driver need to do that. >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok.

Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to

Hi all, it took a while, but on sourceforge.net I added the new release 0.6 of chan_capi-cm driver. Note: dial string and capi.conf has changed. The main changes are: - added 'relaxdtmf'. - more BSD compatibility - correct PROGRESS handling - added verbose text for capi info/reason error messages. - use correct facility-selector for echo-cancel - added application capicommand() for CAPI

Hi, is anybody running asterisk on a xen domU and can give an opinion on the following: I have delegated a FritzCard and a HFC card to my domU and installed an asterisk setup that was running on the same isdn hardware but on a dedicated machine flawlessly. I experienced what I believed to be timing problems: sometimes calls on the Fritzcard did not seem to "reach" asterisk, when

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo

Hi, can anybody comment on the cost of matching with IPP2P vs. Layer7. Also, does a iptables rule with more complicated matching mechanism also slow down processing if all the packets are matched before they reach the rule. I.e. is the mere existence of a potentially costly rule already slowing down processing or only if packets are actually processed by it? Thanks very much in advance.