Displaying 20 results from an estimated 3000 matches similar to: "Comfort Noise incomplete - No translator path exists for channel type MGCP (native 4) to 256"
2005 Aug 15
2
No translator path exists for channel type MGCP & Comfort noise support incomplete
ONLY ON MONDAY!
Well it used to work - calls between my aaln's that is. I moved from debain to redhat (same conf. files for asterisk) and this is what I get.. looks like several errors. errors I never got before. Also asterisk isn't observing the digits as I dial them like it used to however it still trys to route the call when I'm finished dialing. Anyone with a though on this?
2009 Dec 17
2
Integrate a CPE with Asterisk in MGCP
Hello all,
I'm looking for some help to try to understand why my CPE doesn't work
good with Asterisk in MGCP.
Here is what I want to do :
- Register a TECOM AH4021 on Asterisk in MGCP with the following profile
in mgcp.Conf :
[general]
port = 2727
bindaddr = 10.95.20.1
disallow=all
allow=g729
allow=alaw
020202020202]
context=mgcp
host=dynamic
canreinvite=no
dtmfmode=rfc2833
nat=yes
2005 Mar 25
2
MGCP issue
Hello List,
I'm trying to setup MGCP channel with a Centile Media Hub box. My
Centile box has 4 ports and I got no dial tone. Can somebody help with
this isuue?
This is my mgcp.conf and extensions.conf
Thanks
Daniel.
; MGCP Configuration for Asterisk
;
[general]
port = 2427
bindaddr = 192.168.11.20
disallow=all
allow=g729
allow=alaw
allow=ulaw
[192.168.11.200]
context=MGCP
2004 Apr 12
2
SwissVoice IP10S not able to dial calls
I have set up a new SwissVoice phone and it can receive calls but I cannot
make calls out from it. The setup is simple for now, 2 phones: SwissVoice
is ext 7726 and Cisco 7960 (SIP) is ext 7999.
I can call from the Cisco phone and it rings on the SwissVoice phone but
when I dial from the SwissVoice phone I get a busy tone upon dialing the
second digit. The log reads as follows:
-- Endpoint
2004 Jan 22
2
MGCP Problem.
Hi.
I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk
with the next configuration files.
'--------------- extensions.conf
----------------------------------------------------
[general]
static=yes
writeprotect=yes
[globals]
ap1 => mgcp/aaln/ap200@64.76.148.186
[macro-apl1]
exten => s,1,Dial(${ARG1},30,Ttmr)
;exten => s,2,Voicemail(u${MACRO_EXTEN})
2003 Oct 20
1
mgcp transfer takeback with ata186 (logs with comments - long post)
Hi,
in following of a recent discussion I got to work on MGCP with the Cisco
ATA186 again, and got it to work very nicely. However, there is a little
thing with transfers I would like to get comments on:
Call comes in from PSTN and goes to an ATA186 (MGCP)
Call is answered and then, using flash, transferred to another extension
If the extension is available, there can be an announcement and
2003 Dec 29
1
transfer with MGCP
Hello,
I`m try to make the attended transfer work Dlink DG-104S via FLASH, when
somebody calls my phone I pickup and press flash to get a second line to
call another extension. When I press flash I hear no dialtone, and only
a long and then small beep. When I try to dial digits I hear again those
long+short beeps, but the extension dialed is not ringing. If I pres
flash again I get back to
2004 Jan 22
3
MGCP w/8x8 DTA-310 and as5300 pstn gateway
Hello folks,
I'm trying to get an 8x8 DTA-310 running mgcp to work. I get no
dialtone & can't get it to ring. My mgcp.conf says:
;
; MGCP Configuration for Asterisk
;
[general]
port = 2427
bindaddr = 0.0.0.0
[172.16.2.25]
host = 172.16.2.25
context = default
line => aaln/1
And here's the interesting bits of extensions.conf:
[globals]
...
TRUNK=H323/BYEXTENSION@pstn_gw
...
2005 May 20
2
MGCP 1.0 / NCS 1.0
I'm trying to use a 4 port ATA that was designed for use with MGCP 1.0 / NCS
1.0 -- is the channel_mgcp compat with NCS -- anything I can do to make it
compat?? This is what happens - below
*CLI> mgcp reload
Reloading MGCP
== Parsing '/etc/asterisk/mgcp.conf': Found
Use EXIT or QUIT to exit the asterisk console
== MGCP Listening on 10.1.22.39:2427
== Using TOS bits 0
mgcp
2003 May 19
1
MGCP and Cisco ubr924
I've been trying to figure this one out for a while, but to no avail.
I have my cisco ubr924 setup for MGCP with Asterisk as the call-agent. I have manually registered the endpoint in mgcp.conf. When I pick up the phone, I get no dialtone and debug shows errors. IOS on the ubr924 is 12.2.
Any help is appreciated.
from mgcp.conf:
[ubr924]
host=65.37.86.203
context = from-sip (just as a
2003 Dec 24
8
G729 troubles
Hello,
I've successfully installed Asterisk from last CVS and configured it
for using with DLINK-DG104S as mgcp CPE and PGW2200 as external sip
server.
All are work fine at G711 codecs, but then I disable all codecs except
g729 some calls failed (Not all calls. Some calls passed at g729
succesfully).
All my devices configred to use only g729 and I don't see other codecs
at mgcp or sip
2004 Oct 15
1
Asterisk crashes on special Transfer with MGCP/ATA 186
Hi all,
i am using CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a with Cisco
ATA-186 3.1.1 atamgcp
We are used to make an special ;) blind transfer like
(Flash)Number(Hangup before anyone answers or ring).
Then * crashes (see below) if the man in the middle is an cisco-ata-186-mgcp
If one waits until the last one rings, then hangup, everything is fine.
If one waits until the last one
2004 Dec 22
1
MGCP Transaction identifiers
I know this is not the most appropriated list to this, but I will try:
Does anyone know what is the criteria to the generation of the transaction identifiers in MGCP? I mean, are they generated by a randomic method?
I'm using Asterisk and MGCP eyeP Phone and observed that the RSIP and NTFY (methods created by the gateway) use high values in the transaction identifiers, while the RQNT, AUEP,
2003 Apr 24
3
new mgcp patch errors
see below
I tried to call 98013356 from the following phone (from mgcp.conf)
[iptlf03]
host = 192.168.33.3
context = default
inbanddtmf = 1
callerid = 22545062
line => aaln/1
Console output:
== Spawn extension (capiring, 9988001133335566, 1) exited non-zero on
'MGCP/aaln/1@iptlf03-1'
-- MGCP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03
-- Delete connection 4
2004 Aug 18
2
Festival Installation - Asterisk 1.0-RC2 && Debian Woody
Hey All,
Thought I'd take a bash at trying to get Festival to work here on my lab
system with the aim of using it to create our IVR menu prompts. I've
spent most of the afternoon searching through the Wiki, the Festival
website and Google and I've got a couple of questions.
First one is that the 'Asterisk+festival+installation' page on the Wiki
mentions the RedHat 9 RPMs
2003 Oct 30
4
SwissVoice MGCP IP10S
I have a SwissVoice IP10S but can not seem to get it to have dialtone or
dial on *. Calls to or from 3001 don't work.
Any ideas are appreciated.
Robert
mgcp.conf is:
[general]
port = 2427
bindaddr = 192.168.0.110
[ip10]
host = 192.168.0.5
context = from-sip
line => aaln/1
The portion of extensions.conf is:
exten => 3001,1,Dial(MGCP/aaln1,20)
exten => 3001,103,Hangup
2003 Jun 30
3
MGCP with Cisco doesn't work
I'm trying to link up Cisco MGCP-enabled router (residential gateway) with
Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP
0.1 vs 1.0?
Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk):
MGCP read:
NTFY 2 aaln/0@voip-gw1 MGCP 0.1
X: 0
O: hd
from 192.168.154.99:2427MGCP read:
NTFY 2 aaln/0@voip-gw1 MGCP 0.1
X: 0
O: hd
from 192.168.154.99:2427Verb:
2003 Jul 11
3
mgcp problems
I strange error messages when using mgcp and ata186 .
This session is simply dial into 600 demo extension - echo test
...
Handling request 'NTFY' on aaln/1@10.0.1.19
Transmitting:
200 29 OK
to 10.0.1.19:2427
-- Endpoint 'aaln/1@10.0.1.19-1' observed '0'
-- MGCP Asked to indicate tone: on aaln/1@10.0.1.19-1 in cxmode:
sendrecv
Posting Request:
RQNT 306
2005 May 12
1
Asterisk with ShoreTel 210 (MGCP)
Okay, so I'm a noob.
Asterisk looks very promising, so I say "thanks" and "good job" to all who
contribute.
My * test box is up and running with soft phones using IAX and SIP, so now I'm
on to testing hard phones.
I borrowed a couple ShoreTel 210 phones from somebody who had them on hand but
they only support MGCP. I see that there's an mgcp.conf in
2003 Sep 29
1
Can't place a call with MGCP Phone
Hello,
I have just received an MGCP Phone for test purpose and I can't place a
call from my MGCP Phone.
I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf:
;
; MGCP Configuration for Asterisk
;
[general]
;port = 2427
;bindaddr = 0.0.0.0
;[dlinkgw]
;host = 192.168.0.64
;context = default
;line => aaln/2
;line => aaln/1
[192.168.10.10]
host = 192.168.10.10
context =