similar to: DUNDi Install

Does anyone know how to maximize music on hold quality on calls inbound from PSTN? I know that it is common to have choppy and static sounding music on hold when connecting via PSTN but how can that be minimized? I assume that the bitrates, type of music, etc can minimize the effects. Does anyone have any experience in this area? Do you know where I should look for more information?

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

>From the reading and testing I have done it doesn't look like SIP supports a username and password in the Dial string. I currently have the following mapping. priv => dundi-extens,0,SIP, dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial On the sending side I see NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi' and not

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On

Are there DUNDi CLI commands for Asterisk 1.4? I have searched google and I only see the dundi commands in Asterisk 1.6, although I see reference to them in older version's of Asterisk such as Asterisk 1.4 here: http://www.asteriskguru.com/tutorials/cli_cmd_14.html. When I view the CLI commands through help I don't see any of the dundi commands and there are errors when I run a command

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

hi: i am new to asterisk and dundi. we have some branch office which will use asterisk in the future. they will form a full-mesh structure so every site can contact each other directly. i want to try setup dundi, then we don't need to modify every pbx when a new site add in the cloud. thanks to the great dundi document "caveman can do it" and other resource in the

Hi few weeks ago I read about redundancy (HA) of asterisk boxes using DNS, DUNDi, so I decided to give it a try. OS FreeBSD 6.1-RELEASE, asterisk 1.2.7.1 on one peer I get: lk110*CLI> dundi show peers EID Host Model AvgTime Status 00:11:43:3d:69:e6 195.28.109.37 (S) Symmetric Unavail OK (1 ms) 1 dundi peers [1 online, 0 offline, 0

Hi guys!! This is something that have always bother me, hope you can help me... :) I've 8 server connected using IAX / DUNDi, it works just fine. However, sometimes when some of our links goes down the server takes forever to appear back as OK at DUNDi's list and people can't call the other Box. It's happening right now: CLI> dundi show peers 00:14:22:16:54:c5 200.X.X.6

This is driving me nuts. Why doesn't the DUNDILOOKUP function return the weight of a path to a number? The CLI 'dundi lookup' command does. What about the mac address and expiry period? The CLI command returns those, but the DUNDILOOKUP function does not. Why? We absolutely need this in order to perform out routing logic. It has become quite apparent to me that DUNDi is _NOT_ suited

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

Hi guys, I'm building a PoC Asterisk 12 cluster based on a number of guides I've found on the net. The basic concept is using ARA in conjunction with DUNDi. I have set up ARA with pjsip according to this excellent guide here: https://wiki.asterisk.org/wiki/display/AST/Setting+up+PJSIP+Realtime This is working nicely, so now I am turning my attention to DUNDi, as per this guide here:

Is there a way to have a dundi host advertise extensions for another server? A-----------B-----------C I'd like A to reach C through B. A and C would handle the call, B would just be the DUNDi intermediary. Assuming A has 101-199 B has 201-299 And C has 301-399 A sample dundi/extensions/iax config for B is all I need. I can get single DUNDi queries running fine(A->B, B->C,

Hi Well it is well some time that my last DUNDI peer has become unreachable. I guess too many issues with spoofed numbers etc. But I am wondering, do people, especially larger entities like telcos, still use DUNDI? I know that in some Hamradio communities, DUNDI is used to interconnect PBXes, but that is with private phone number ranges, not connected to the public. Want some DUNDI peering?

Hi, i'm having asterisk with sip working fine, including dundi lookups. The only problem i'm having is that the dundi answer allways contains my internal, private ip. Is there any way to set the targeting ip that is sent out in the dundi answer (to my public ip or any other where i want to receive the call)? Regards, Andreas.

With all of the recent talk on the list about DUNDi, I have a question. From the outset it appears that SER is often used for high availability solutions and as a tool for almost clustering Asterisk boxes behind it. It appears to me that DUNDi is providing a lot of this as well. Now I know DUNDi is not an application by itself to proxy SIP requests but can I hear any information out there that

> Questions: > > 1. Is the wiki DUNDi example and the dundi.conf file too difficult to > follow for new users? > I wouldn't exactly say that it is too difficult but that the target audience for the default examples is not the average person/entity that could make use of the power inherent with DUNDi. When an average * user/admin wants to use DUNDi they will want to start out

Hi All, I've been banging my head on a small dundi problem... I have two * servers setup, both have almost identical dundi.conf files: root@tsjonge:/opt/asterisk/etc# cat dundi.conf [general] department=thuis organization=pipsworld locality=Amsterdam stateprov=NH country=NL email=remco@pipsworld.nl phone=+31207508308 ;bindaddr=0.0.0.0 ;port=4520 entity=00:02:b3:49:69:5e ttl=16

Who said I was a C programmer? -----Original Message----- From: Terry Wilson [mailto:otherwiseguy@gmail.com] Sent: Wed 6/14/2006 6:03 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: Re: [Asterisk-Users] DUNDi Not Able to Handle Complex FailoverSituations pbx/pbx_dundi.c in dundifunc_read(). shouldn't be too hard to have it set some variables (i.e.

Good afternoon gentlemen (and ladies). A costumer of mine has many servers and each one maps their SIP extensions to the others via DUNDi. It works like a charm. SIP extensions can only register at one server, the one they "belong" to. In case one extension wants to call other that is registered in another server, DUNDi takes care of that by calling the other server using IAX2 and G.729