similar to: X-lite and Dell Optiplex

Hello every body, I ve installed Trixbox 1.2 on "DELL OPTIPLEX GX 240", i upgreded it to the latest version. I've 2 cards installed in the same pci channel via a bridge or plug i don't know exactly what's his name( but a card (1 pci) that gives 2 pci channels) the first card is TDM400P: it's ok the second is TE110P: it's not ok . No led is on neither the red nor the

Hi, I have tried to run the following (I know it's a huge data set but I tried to perform it with a 1 GB RAM computer): library(foreign) library(MASS) library(nlme) datos<-read.spss(file="c:\\Documents and Settings\\Administrador\\Escritorio\\datosfin.sav",to.data.frame=TRUE) str(datos) `data.frame': 1414 obs. of 5 variables: $ POB : Factor w/ 6 levels

I've got an old Dell Optiplex (Pentium-II, 1998 Vintage) which is successfully running an X100P card. I'm hoping to upgrade to a TDM400. Has anybody tried running these cards in old Optiplex machines? I'm not particularly worried about horsepower - more about the motherboard having a PCI bus that's able to power up the card... -Ronan

I just started having an issue with PXELinux with one particular model of computer. The issue appears to occur on Dell Optiplex 740 computers, and any disk image that we try to boot with PXE Linux comes up with a Boot Disk Failure for two images or Cannot Load Kernel error for Dell Diagnostics. The error only appears to occurs on the Optiplex 740 model. I've tested PXE Linux and our boot

Hi, The CentOS 4.4 installation doesn't work on a Optiplex 745 because it doesn't support the sata controller. Is there a known work-around? (smaller prob: dvi video doesn't work at install time, vga only) If only we had CentOS 5 :-) Cheers, -- Henk van Lingen, Systems Administrator & DBA (o- -+ Dept. of Computer Science, Utrecht University.

Hi, I want to run a HVM domU. I have a Dell Optiplex 755: model name : Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz I have enabled VT in BIOS settings under performance. However, after I boot into a linux kernel (not under Xen), grep vmx /proc/cpuinfo returns nothing. When I boot under Xen, I get (XEN) Intel VT-d has been enabled (XEN) [VT-D]iommu.c:1700: Queued Invalidation hardware not

hi, i upgraded my testsystem running on a Dell Optiplex 780 fine for the last five years from Debian 8 to Debian 9. It also crashes on boot, after complaining abount an errer for the mcelog (-16) mounting the root partition (/dev/md0) loading parport driver (?) afterwards my monitor is out of frequency was not able to run further tests right now. best regards Thomas --------------

On Fri, Jul 5, 2013 at 1:23 PM, Patrick Verner <distrozilla at gmail.com> wrote: > Sorry for the delay, we were too busy drinking and playing with explosives > yesterday. :) No problem. Many do that here. > Here are some tests. We did one on a similar machine and it worked. > We deleted the configuration file, obviously. > > # Dell OptiPlex GX620 > ISOLINUX 5.11

Hello, I'm interrested in testing any possible workaroud for the Dell Optiplex GX620 keyboard problem, as I just can't downgrade the BIOS version on each and every Gx620 I have to (re)install ! (Plus I can't find a link to download the old A10 BIOS itself.) Don't hesitate to give me guidance on how to proceed, because I can't find anything relevant on the website

Our site has many Dell OptiPlex 790s, all of which are unable to use the 'localboot' PXELINUX option as they either hang at 'Booting from local disk...' or immediately reboot depending on which SYSLINUX version is used. Many people have suggested using chain.c32 to chain load the local disk as a workaround, but this causes problems with Windows 7 BitLocker as it detects the chain

Hello All. I have a dell optiplex 320 that I can install centos5 on using pci=nomsi. That seems to be the only way. After the install grub loads but thats about as far as it gets. It looks like a BIOS bug to me, but I just don't know. I left it sit for a few minutes and it just had the echoed boot params on the screen. I've tried booting with noapic nolapic apm=off acpi=off and noprobe

Good morning, Dell has once again obsoleted out hardware and we're moving forward to the Optiplex 790 as a shipping platform with the integrated Intel graphics chip.? We're using CentOS 5.6 32 and 64-bit with a 2.6.18 kernel. What are my options for supporting the newest Intel graphics chipsets? -b

Hi, I am havind deep trouble with a bunch of our newly arrived Optiplex 330 as it can't run Centos 5.2 property. The installation works fine, but when it boots up, it can't be connected to the network. I am getting error saying " link is not ready" when doing system-config-network. I check lspci and it can detect the network controller no problem. The light next to the cable

Shantanu, let's continue here. You first noticed this on a Dell OptiPlex 755. I think it covers all Dell OptiPlex/Latitude/Precision models that are PCIe based with Intel LoM (LAN on motherboard) utilizing the BIOS PXE OROM, based on the similarity of these systems. The symptoms are that PXELINUX requests pxelinux.cfg/<UUID> by TFTP (but it might not strictly be a TFTP issue) when not

After reading: *[1] http://forums.fedoraforum.org/showthread.php?t=141178 *[2] https://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&topic_id=22187& forum=39 *[3] http://wirelessness.wordpress.com/2007/02/07/installing-fedora-linux-on-a-dell-o ptiplex-320/ *[4] http://lists.us.dell.com/pipermail/linux-desktops/2007-January/000148.html 1. I booted with linux rescue 2. chroot

This same system boots with syslinux-4.06. Let me know if there is any further info you need. We tried syslinux-5.11-pre5 as well. Patrick Verner partedmagic.com

On Jul 2, 2013 7:37 PM, "Patrick Verner" <distrozilla at gmail.com> wrote: > > System: Dell OptiPlex GX620 (Both BIOS A10 and A11 affected) > Medium: Physical CD-RW > Observed: ISOLINUX 5.11 0x51D1AE48 ETCD_ is the only line displayed > on-screen. A flashing cursor trails at the end of the line. Escape key does Is "ISOLINUX 5.11 0x51D1AE48 ETCD_" (assuming

On 07/10/2014 04:07 PM, Alexander Perlis wrote: > Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel > Boot Agent 1.3.81 (2.1 build 089). It gets network and launches > lpxelinux.0, I see the PXELINUX banner line, but there it hangs. > > I tried both 6.03-pre18 and 5.10, same hanging behavior. If I instead > use pxelinux.0 or gpxelinux.0, either 6.03-pre18 or

On 07/10/2014 06:39 PM, Gene Cumm wrote: > On Thu, Jul 10, 2014 at 7:24 PM, H. Peter Anvin <hpa at zytor.com> wrote: >> On 07/10/2014 04:07 PM, Alexander Perlis wrote: >>> Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel >>> Boot Agent 1.3.81 (2.1 build 089). It gets network and launches >>> lpxelinux.0, I see the PXELINUX banner line,

I have been using PXELINUX, with "LOCALBOOT 0" when wanting to boot from disk, for many years. Now on new Dell Optiplex 990 machines, PXE boot with "LOCALBOOT 0" hangs after message Booting from local disk... without the expected "Exiting PXE" message. I tried "LOCALBOOT -1" and some other values also, none seemed to work. I tested SYSLINUX 4.04.