similar to: asterisk + chan_mISDN = undefined symbol: ast_pickup_call

Hi List, I?m having problems compiling chan_misdn: asterisk:/usr/src/chan_misdn-beta-0.0.3-rc4 # make install cc -ggdb -Wall -D_GNU_SOURCE -Wno-missing-prototypes -Wno-missing-declarations -fPIC -I/usr/src/asterisk/include -DAST_CONFIG_DIR=\"/etc/asterisk/\" -I/usr/src/mISDNuser/include -I/usr/src/linux-2.6/include -I/usr/src/mISDNuser/i4lnet/ -Wall -c -o chan_misdn.o chan_misdn.c

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

Hi, I have a Digium B410P 4-port BRI card. I installed misdn 1.1.3 with hfcmulti driver and misdnuser 1.1.3. I configured the card "correctly" as misdnportinfo reports: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- Port 2: TE-mode BRI S/T interface line (for

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

Hello I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine. I am using the OpenVox B200P ISDN card. My problem is that even though chan_misdn module seems to be loaded correctly with Asterisk (I can see it using 'module show' command) the misdn commands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas

Hi list, I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in zaptel dir and: make, make install, make b410p. Everything is ok. Now I want to compile Asterisk but can't activate the chan_misdn channel which depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E) When I made the make b410p, all

Quick question: Is there a way to distinguish between calling MSN's when using chan_misdn? More info: I've got my ISDN2 (EuroISDN) up and running here in Romania with 1 base number plus 5 MSN's. Now I want to my * to do different things when receiving a call on from different MSN's (like forwarding the call to my FAX machine or forwarding the call to my mobile). The obvious way

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

Hello everyone. I've got a HFC ISDN card that I'm using with chan_misdn and it basically behaves like crap. Echo is waaay worst then echo I get TDM400 card, sound is "choppy" (there other side is allays complaining about sound interruptions) and to top it all it detects fake DTMF's all the time. Is this a chan_misdn problem or is it a card problem? I really need to get

Hi all, I have a cologne chip card which is connected directly to the ntba. Outgoing and incoming calls work fine, but incoming calls from ntba have the wrong callerid (first 0 is missing). I'm using current jolly misdn drivers and chan_misdn-14_04_05 with asterisk stable. Is anyone seeing this behaviour too? Thanks in advance Christian

This is my second attempt trying to get help and I am hoping someone can. When the musiconhold extension is matched, Asterisk attempts to execute musiconhold and stops right away, this is what I gets: Executing MusicOnHold("OSS/dsp", "") in new stack -- Started music on hold, class 'default', on OSS/dsp -- Stopped music on hold on OSS/dsp Is there a file that

What are the advantages in using mISDN over other solutions? If I knew why it was a good idea (like does it have better sound quality than alternatives?) then I would put the time in to test it, and also improve the Wiki. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Thomas H?ger Sent: Friday, January 21,

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

Hi there, we've announced a new release of our chan_misdn channel driver. chan_misdn is a GPL channel driver for the new Linux ISDN-Layer mISDN (www.isdn4linux.org). So you can use all from mISDN supported ISDN catds in Asterisk. Feel free to donwload and test it at : http://www.beronet.com/download/chan_misdn-beta-0.0.3-rc4.tgz You can report bugs and feature requests to

Hi there, we've announced a new release of our chan_misdn channel driver. chan_misdn is a GPL channel driver for the new Linux ISDN-Layer mISDN (www.isdn4linux.org). So you can use all from mISDN supported ISDN catds in Asterisk. Feel free to donwload and test it at : http://www.beronet.com/download/chan_misdn-beta-0.0.3-rc5.tgz You can report bugs and feature requests to

Has anyone got chan_misdn working with passive BRI cards yet? I've tried both hfc (hfcpci.ko) and w6692 (w6692pci.ko) cards, but when I start asterisk I get the following when chan_misdn is loaded: [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found == Registered channel type 'mISDN' (This driver enables the

Hello, I'm evaluating to possibility to use chan_misdn as a short term workaround, in case latest Dahdi is not stable enough for what we are planning to do (we wish to use Junghanns and Digium BRI hardware with Asterisk 1.6) . I've read www.mISDN.org but still have a couple of questions : 1. Is correct that in a 2.6.27 (and up) enabled kernel, the "embedded" mISDN version is

Hi, Has anyone had experience installing it? yum install asterisk-chan_misdn I'ts the latest Trixbox Distro version and same issues exists if add in the Trixbox repo. FAILS as per below: I have a ISDN single port PCI BRI card installed and detected. __________________ Loaded plugins: fastestmirror, kmod Loading mirror speeds from cached hostfile * addons: www.ftp.saix.net * base:

Hi For use my isdn card in NT mode I have compiled chan_misdn. When I launch asterisk it stop with th e message : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables the asterisk to use hardware which is supported by the new ) Locking