similar to: Problem with FWD connection rejected

I have a brief from a local hotel to build a PBX using Asterisk but they want to use their exisiting telephones and wiring from an old PBX that no longer works. Basically, I can build the system but an looking for a card that will allow for upto 20 extensions to be wired into the back of the PC. Doeas anyone know of a solution to this Sean-- ICQ: 679813 FidoNet: 2:263/950 Jabber:

Ok, I am going for A@H with the CentOS iso disk. Installed and just checking a few things out. My other question is this, which I forgot to ask before. We have no Broadband here and more than likely will never have, so I am just looking at building Asterisk to handle inbound and outbound calls, at home via a ISDN card and for my hotel job via a PSTN line setup. Is this very complicated to setup

Hello everyone, I want to build an Asterisk Box where i need 8 FXS interfaces to connect 8 phones to. The problem is, that there is only one PCI slot available. What i have is 4 USBs 2.0 interfaces free (if this helps). So here's my question: how am i going to do this? i tried to find any PCI cards supporting 8 FXS interfaces, but without success. does anyone know such hardware? Thanks in

Is there anyway to prevent an extension from dialing certain codes. ie I want to prevent extension 203 from dialing number which start with 00 087 086 etc Sean -- +----------------------------------------------------+ |VOIP: FreeWorldDial 689482 VOIPBuster thecivvie | |GPG Key: http://thecivvie.fastmail.fm/thecivvie.asc | +----------------------------------------------------+ --------------

Hello asterisk-users, Just curious if anyone has the indications for Ireland, tried googling for it to no avail. Sean -- +---------------------------------------------------+ |VOIP= FreeWorldDial: 689482 VOIPBUSTER: thecivvie | |GPG Key http://thecivvie.fastmail.fm/thecivvie.asc | +---------------------------------------------------+ Strange things happen under the midnight sun when Men

What do I need to install for OSS or ALSA for console use only Sean -- +----------------------------------------------------+ |VOIP: FreeWorldDial 689482 VOIPBuster thecivvie | |GPG Key: http://thecivvie.fastmail.fm/thecivvie.asc | +----------------------------------------------------+ -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I currently use courier imapd, exim and ldap on my mail box. There are no users on this box, all info is taken from the ldap server. I note that dovecot does not use ldap as a backend, but curious if this in on the cards, or even mysql backend. Sean - -- Sean Rima http://www.tcob1.net Linux User:

Dear all, I often need to execute functions repeatedly (thousands or more times). While doing so, I encounter two types of problems: 1.) In some models, the estimation process fails due to convergence problems 2.) Some models will run forever. My solution to #1 is to use tryCatch around the function call so that my script does not stop if one of the models will raise an error. This works fine.

Log report is reporting a lot of these lately.. following is just a short snippet from the beginning on one server. WARNING!!!! Possible Attack: Attempt from 104.29.broadband2.iol.cz [83.208.29.104] with: command=HELO/EHLO, count=3 : 1 Time(s) Attempt from 106.7.broadband7.iol.cz [88.102.7.106] with: command=HELO/EHLO, count=3 : 1 Time(s) Attempt from

Hello! I have set up tunnel between a FreeBSD machine and Windows Vista. Tunnel is established, but when I try to ping either end ping fails. I have temporarily switched off firewalls on both machines, no luck. Here is client tinc.conf on Vista: Name = lenovo_client ConnectTo = lenovo_server Interface = tinctap Subnet = 10.20.40.0/24 Sevrer tinc.conf on FreeBSD: Device=/dev/tap0

Yeah....I think that every install I have done the first thing that happens is "why is there a delay before the call connects?" and the answer is "you have to hit dial or wait 10 seconds". -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tom Rymes Sent: Thursday, August 11, 2005

Hello CentOS, I am trying to compile zoneminder which requires libjpeg.a I jave libjpeg.so installed okay. Is there a package or do I have to recompile the libjpeg package Sean -- +---------------------------------------------------+ |VOIP= FreeWorldDial: 689482 VOIPBUSTER: thecivvie | |GPG Key http://thecivvie.fastmail.fm/thecivvie.asc |

Recently we began seeing lots of these log entries on our off-site mx smtp host. I have googled this but I am not clear from what I have read if this is something we can stop altogether or should even worry about. Comments? Logwatch. . . --------------------- sendmail Begin ------------------------ SMTP SESSION, MESSAGE, OR RECIPIENT ERRORS ------------------------------------------

Running CentOS 4.2 with all updates. I've been using sendmail for my MTA since forever. I've grown used to it and I can make it do what I want it to. However (there's always a catch, isn't there)... Lately it seems that some mail is being lost. I've noticed some instances when a message was sent to myself and others which I will only see if someone replies back to

The LoginEngine plugin of RailsEngines can be show working well in the video http://rails-engines.rubyforge.org/movies/engines_intro.mov However it does not work on my pc. I have had the rails 1.0 installed as well as worked under windows enviroment. After I have repeated the steps that the video shows,the login action does not take into effect while not redirect to the home action as the

Hi all, I have the Asterisk set up and 2 softphone (Xlite) set up on two other PC. With the following configuration, I can use one softphone (2000) to call the other one (2001) and/or the voicemail at 2999. Here is my problem: 1. When I dial 9+nxxx-xxxx with one of the softphone to the PSTN via X100P card, I got busy tone. (i.e. I want to use the phone line which is connected to the

ehh, just a little remark/note for the mysql passwd backend users and developers... when adding a user, the 'account desc' field is NOT filled in..! when adding some text manualy, and doing pdbedit -v <user> the field showes up, so when reading from the passwdbackend, the fields are resolved, when writting too the passwdbackend , the description field (and maybe more important

hello, im playin worms armageddon in opensuse with wine 0.9.44, so this works fine. but in windows i became very familar with my self made keyboard layout. i changed space to num 0 for example. i tried some progs now, like key tweak for windows, this doesnt work due to the missing registry entry, which key tweak uses. autohotkey has problems with finding my keyboard layout (showes me errors in

There's nothing wrong with that path. If your DNS is working, you should be able to connect to \\foo, which is your AD domain. It will just pick one of your DCs instead of a static one. Alex On 06/02/17 14:36, basti via samba wrote: > > samba-tool gpo listall > showes also wrong path in gpo > > > On 06.02.2017 15:21, basti via samba wrote: >> When I do an gpupdate

Rowland, thank you for answering! I have investigated this a bit, and I think that using 18.04 for the new DC will not be successful anyway. Reasons: the AD I have has been created back in the days when 14.04 LTS was fresh. The provisioning scripts worked differently. 14.04 has been upgraded to 16.04, and I think that I do not have all of the DNSes configured properly and this might be the cause