similar to: T.38 decoding

I'm looking for somehting like the standard house hold linksys/dlink router. Basically it needs to have at least 1x100mbit port, wireless G capabilitys and at least 1 x anolog voip/sip connection. I've found linksys's WRT54GP2 which appears to do what i want. Anybody use this? Does it require vontage's service? I'm looking for any recommendations. Thanks -- ~Shaun

Hi, I just bought the E100P from digium. It has both keys: 3.3V and 5V, so it would fit both, in a 5V-PCI slot and in a 3.3V PCI slot. Is it true, that I can plug it without destroying it in an ordenary 5V PCI slot? Roger.

Hi all, I know that this has been passed around before, and I know that it happens about every 3 months or so, but evertime the answers change, so I thought I would pass it around again. A company I work for has 3 incomming lines and 4 phones. They require voicemail and MOH. Their phone systems VM hard drive died today, they were quoted a $2000 to replace it. I started to talk to them about

I have a problem with including extra data in a lattice graphic. I am trying to put some calculated values in an extra column of a boxplot. A minimal example should show what I am trying to do: foo <- data.frame( Treatment=rnorm(1:12,2),

Hi everybody! I've setup my dialplan so that if an extension dials *21*, that extension is added/removed as a queue member to a queue. (State toggled). But it would be great to get an "optical feedback" of that phone's state regarding the queue membership. Does someone know if it is possible to light up a LED under this szenario? Many thanks! Norbert

Hi, the following szenario leads to a problem: I connect an CAPI channel to an AGI-Script per Manager API. This Agi script starts the MeetMe-Application. The Person on the Capi Channel is now able to speak with the other conferess in the MeetMe-Room. But if the CAPI channel hangs up, the busy tone is streamed into the MeetMe Room for several seconds, until the CAPI HANGUP-Signal is finally

addition to my last post: http://groups.google.com/group/llvm-dev/browse_thread/thread/afd85c3f303ec2a9 i know that using static on my globals will remove them - no other compilation unit can then extern the vars but my question is - in this closed szenario clang is "directly" producing the exe - isn't clang aware of that the vars are not in use? btw: the microsoft compiler

Hello List, I have a problem with the CA on my Puppetmaster. This Puppetmaster is connected to different Networks with different sub domainnames. The Puppet clients connecting via different Interfaces. There is no routing between subnets. Only one subnet can connect successfully. This is because the subject in the Certificate is the name of this subnet. All other clients get: Could not

Hello, I have anolog lines coming throug Dahdi to Asterisk Server, one of the anolog lines is used for fax line. I received fax fine without any problems using Iaxmodem with Hylafax Server. Outgoint fax is the problem, when IAXMODEM dial out using Dahdi channel, dahdi answers and start to dial the outside number however Iaxmodem thinks that dahdi is the remote fax machine and starts sending fax

Due to security reasons smb signing has to be activated and this share between linux and windows is now dead. And I do not find the correct settings to do a public share in this szenario. It has to be public, because the linux is'nt allowed to join the domain and on the other way, the win-clients cannot leave their domains. And I think, just signing smb-messages should not speek against a

Hi all, I'm trying to send FAX with an anolog fax behind a Patton M-ATA to an other analog fax plug on directly on the PSTN network. I use the last stable version of Asterisk 1.4 ... Somebody have any information why it's doesn't work a all ? Thanks a lot, Thomas

Hello Gluster Community, I am using Gluster3.10 in a 2-Node-Szenario (with CentosOS7-machines). After restarting one of the nodes, sometimes one of these two phenomena occurs: 1. The brick process of a volume on the newly started node is no longer running 2. The Brick Process Is Running But The First Knot Still Believes He Can not Reach The Brick (Health info reported "Transport

On 2012-07-05 12:53, Dennis Luehring wrote: > addition to my last post: > http://groups.google.com/group/llvm-dev/browse_thread/thread/afd85c3f303ec2a9 > > i know that using static on my globals will remove them - no other > compilation unit can then extern the vars > > but my question is - in this closed szenario clang is "directly" > producing the exe -

Hi, I have a simple use case, but can''t get the dependency resolution to work on first run. This is not critical, but I want to understand what''s going on. Here''s the szenario: * puppet --version: 2.6.4 * on the bare system, I have vim 6.4 installed (no vim-base) * I first want to upgrade to the latest version in repo, which is 7.1, * and then install vim extensions for

Hi Dimitry, On 05/07/12 13:30, Dimitry Andric wrote: > On 2012-07-05 12:53, Dennis Luehring wrote: >> addition to my last post: >> http://groups.google.com/group/llvm-dev/browse_thread/thread/afd85c3f303ec2a9 >> >> i know that using static on my globals will remove them - no other >> compilation unit can then extern the vars >> >> but my question is -

Hi List, I have a szenario where I need to reach a host on the internet from a "firewalled" network but there is a HTTPS-proxy runnnig. As some people know you can tunnel all TCP-connections through this proxy because it can't decide if someone is really doing SSL or just Telnet to port 443 (or use SSH in our case). So I've written a patch for ssh to make it send the CONNECT

Hi Rowland The client is stopping communication, not the server. With error 1240. And since it is working with the client setting RequireSecuritySignature=0 without any problem, ' hosts allow' cannot be either the problem nor the solution. So - setting RequireSecuritySignature=1 at the client needs a corresponding setting at the server - I guess. But even explicit settings on samba side

Hi dear group members, I have finally an Asterisk box working, capable of receiving and making calls. I have this issue while calling mobiles from our SIP softphones: -------------------------- linux*CLI> -- Executing NoOp("SIP/2000-6850", "3487024125") in new stack -- Executing Dial("SIP/2000-6850", "ZAP/g1/3487024125") in new stack -- Called

Is is possible to have samba, upon request from the client machine, query a remote database for the username associated with the client machine, and accept that as user authentication? -- ian

Hi all, i have a xen 4.3 installation and would like to have a bridge bond szenario: *** eth0 eth1 | | bond0 | br0 | vif = [ ''bridge=br0,mac=xx:xx:xx:xx:xx:xx'' ] *** With the network script in debian wheezy *** /etc/network/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1