similar to: Limiting the number of calls

My VoIP provider allows me to have more than one call outbound on the same line simultaneously, for some reason. I am pretty sure that they do not want this to happen, so I'd like instead to limit each line to one call. I do not want the users to have to dial another prefix to go out on another line. Is there any way to add multiple accounts for my _9. extension and have Asterisk

Hi All, Can someone please tell me how to limit incoming calls to SIP channels using the SetGroup & Checkgroup command. I don't want any call waiting on SIP channels and you are somehow meant to be able to do it with these commands. Many Thanks Daniel Niasoff

In our setup, outbound call volume frequently exceeds the line capacity of the DSL line. We do not want to move to another codec to better utilize the line, but instead wish to automatically divert overflow to the Long Distance T1 when the DSL is "full". Ideally the system would also be able to adjust automatically to network conditions such as network outage, high latency, jitter and/or

I am checking on the SetGroup / CheckGroup commands, but I have some troubles to undestand the examples. SetGroup(moh) can be moh anything as I like? Usually moh stands for "music on hold" CheckGroup(1) checks if somebody in in group "moh". Does it mean I can only have one SetGroup(xxx) ?? When I look at example 2 than I see two SetGroup commands and one CheckGroup

How do I limit the length of an extension? In my test IVR/Automated Attendant (whatever it's called), at the beginning it plays "if you know your parties 3 digit extension, you may enter it now) and then it gives a list of options. If the caller puts the 3 digit extension, it goes through fine, if they press 1, or 2 it goes to the selected menu option, but if they dial 91235551212 it

Hi, I have been trying to get my * box to limit an extension to one line for either an inbound or outbound call anyone got a quick example I can look at or a good howto? Cheers, Dee

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

Hi there, I was wondering how I can use setgroup and checkgroup for perfom incoming and outgoing limitation checks. I've have some users that doesn't what to be able to recieve more than 1 call at a time, and I also want to limit a users outgoing call abilities. Any help would be greatly appreciated. Kind regards Cf --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus

I am wondering if there is a way to create a SIP/IAX group of outgoing lines like Zap groups. I am currently using the following method, but would like to use features such as ?g2? that would list all the accounts for a SIP or IAX connection. exten => _1NXXNXXXXXX,1,Dial(SIP/account_name:Password@gw5.voicepulse.com/${EXTEN }) exten =>

Okay, here is the background. I have a PRI with 15 active channels on it. I originally setup all of them in group=1 and all outgoing and incoming calls used this group. The phone number that I have associated with these channels ends with 750 and that is how I direct the calls. i.e. In my extensions.conf I have: exten => 750,1,Dial(SIP/120,20) All this works fine. Now I have the need

Hi all, I've been using the following method to limit calls to sip clients to 1: exten => 200,1,SetGroup(200) exten => 200,2,CheckGroup(1) exten => 200,3,Dial(SIP/200) exten => 200,103,Busy This works fine for a single extension. However, I also need to dial groups of sip clients. It appears that SetGroup can only be used once per channel. This (useless) example would not

I have a rather long dial plan, but it includes support for call waiting. However, the setgroup checkgroup commands don't seem to be working. Can anyone help on this one? Excerpts are below. First exten-vm is dialed and then dial-new. As I understand, priority 1 increments the active channels for the caller and then in "dial-new" priority 8 increments for Arg3, or the Callee

Hi, I seem to have a problem with chanisavail and the call limits on sip phones(incoming and outgoing) The problem seems to be that chanisavail when trying create to create channels and hanging them up afterwards screw up the current usage limit on the phones. Example with chanisavail: Phone A calls voicemail (usage now 1) Phone B tries to call Phone A and uses ChanIsAvail in the dialplan.

Does anyone know if SetGroup and CheckGroup apply to only current context or is it per server based? Ta SJ

I searched and read all the relevant posts, but I still don't have a solution to my problem.. I've got a small queue for tech support calls using AddQueueMember. The agents are using IP300's from polycom. In my example, only one agent is logged int. When a call comes into the queue, asterisk sends the call to the one agent logged in. The agent answers and is talking to the

Alright, folks. I just deployed * into full production at my office. We have around 50 7905's, 5 7940's, and a handful of soft clients. We run a call center with around 15 agents. I also have a queue set up for the receptionists so that they don't get bombarded with calls. Everything seems to be working with a very few minor glitches. I firmly believe that the few problems we are

In the past I used SetGroup and CheckGroup to figure out if my allowed providers lines are all used or not. Since most of my provider have given me a single line anyway, I wonder if there is a way to check if this (provider) line is taken already. How can I do that? Same is with the phone. How can I see in CLI if a phone is now in use or not? "Sip show peers" shows me just if it is

See comments below. Henry Devito wrote: > Here's the problem. When I call 555 to login, it asks for the agent ID > which I enter as 501, it asks for the password which I enter as 1234, > then it asks for the extension I dial 501 It then says that extension is > not valid. What am I missing? Of course 501 is valid I can make and > take calls from it now. > > >

I have a Asterisk @home ver 1.0 running with a TDMB11 card. Several sip extensions and a regular phone connected to the box. All routing works fine from the regular phone connected to the box, whether its going to FWD, broadvoice or the PSTN. The problem I am experiencing comes from making calls from the sip phones. They get routed correctly to the sip and iax trunks but when making calls

Hi John, Kevin, Tor and Wiley (and everyone else) - >> I guess the phone just doesn't register as busy when there is only one >> call on a line. It has to have two calls on a line appearance to >> register as busy. Has anyone figured out how to disable this hold >> feature and just have the second call go to the second line, the third >> call to the third line,