similar to: SIP-Trunk problem, Please help!!!

Hello everyone, Well here is my initial posting to the list, and I will admit Asterisk is new to me. I just got everything running here a couple days ago, so still learning the ropes for sure. OK, here is my problem. Currently I have it setup talking to a couple Cisco IP phones, and some Xten softphones, this works great. I also got an account with FreeWorld Dialup using IAX2 and that

i have a prablom here, i want to send a call from A to B use sip trunk , the call can sended B,but not work to PSTN. the message from B server. help pls,what's rong? > > <--- SIP read from 192.168.0.176:5060 ---> > INVITE sip:15921256331 at 192.168.0.151 <sip%3A15921256331 at 192.168.0.151>SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.176:5060;branch=z9hG4bK51a51b96;rport

Hi Guys, I'm having sound problems when diverting a call using asterisk@home 1.5. I am using the following configuration in extensions_custom.conf, extensions_additional.conf and extensions.conf [custom-Sales] exten => s,1,SetVar(DivertNumber=02XXXXXXXX) exten => s,2,Dial(SIP/116, 15) exten => s,3,Goto(outrt-010-outside3,9${DivertNumber},1) (i have replaced the diverted phone

Hi Is there a phone comparison matrix I could consult I have a series of features that I would like to evaluate on the most common phones on the market example: dual-ethernet POE / direct power / both number of lines speed dials programmable buttons BLF LEDS Headset plug conference call built in hands free operation display size codecs communication protocol (SIP, h.323) price availability

I am posting this in case someone need help.. ========================================================= YOU THA MAN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! No sure how I will repay you, but anything you need, just let me know!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you, thank you, thank you!!!!!!!! -- Executing GotoIf("SIP/2007-12c7", "0?4") in new stack

Hi - I've recently bought a mediatrix 1204 and have had a complete nightmare getting it up and running with an asterisk@home setup. I know this isn't a mediatrix list but I'm at my wits end and the support with this product is atrocious. (mine was even shipped with firmware that was incompatible with the win32 software it came with so I wasted a day trying to work out why the SNMP

Hello. I am in a strange situation. I have two asterisk. Asterisk "A" makes a call for asterisk "B" by IAX. Asterisk "B" recives the call and delivers it to Openser by SIP. The problem is openser printing this in the screen: ERROR: parse_to : unexpected char ["] in status 5: <<"David" <sip:>> . ERROR:parse_from_header: bad from header

Hi, I have 2 systems (A and B). I have an 800 number... when someone calls the 800 number it goes: IAX2-->A---IAX---B--->SIP PHONE However.. if the user calling the 800 number is a SIP user that is registered to A it goes: SIP--->A---IAX---B--->SIP PHONE This is the problem... when a call comes in from the IAX2 800 provider, things work fine... however if a SIP user registered to

I've got a fresh (1 day old) svn trunk release SVN-trunk-r225360 of Asterisk and I'm trying to get it to accept a SIREN14 call from Polycom's softphone. Having trouble with SDP negotiation, I want to only allow SIREN14 and nothing else. I also want to record and playback files, any tips on what the Record function parameters should be? In sip.conf I have: disallow=all

im having a strange problem related to call-limit for peers. well im not sure if its related to call-limmit or not. Bottom line is: I call a user A, from user B. user B hears silence, untill it goes to voicemail. when user B hangsup. user B's call limit is reset to 0 but user A's call limit is not reset.strange thing is user A's status on cli is shown as NOANSWER, while user B did not

Dan Cropp wrote: > I had my screenshots flipped. Is there a way to make sure the Contact field is NOT included in the ACK response to the OK (for the Answer)? > > PJSIP is including the Contact for the ACK response to the OK. > Contact:<sip:1234 at xxx.xxx.xx.xxx:5060> > There is no configuration option to configure this behavior. What is the full SIP signaling? -- Joshua

I'm having a horrible experience getting a Cisco ATA-186 to work with *. I can make calls from the ATA with no problems. However, incoming calls make the ATA ring once, and then the call is disconnected. I have no problems with my Sipura 2000 or my Grandstream phones. I am running 2.16.1 sip code on the ATA 186. Neither * nor the ATA is behind a NAT. They are both on public IP addresses

Hi, I am facing an issue while testing the video mail service of Asterisk. I have two different setup on one setup client being used is Mercuro while on the other client is Android based. On the Mercuro setup video mail is stored and retrieved properly while with Android based setup video?mail is not stored (audio is through). Both the client?use H.264 codec with following sdp information:

ping times are fine as well: [root at freepbx asterisk]# ping sipgate.de PING sipgate.de (217.10.79.9) 56(84) bytes of data. 64 bytes from sipgate.de (217.10.79.9): icmp_seq=1 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=2 ttl=57 time=46.4 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=3 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=4 ttl=57

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

I'm new to asterisk and need some help with getting a SIP connection working. I am trying to establish a termination point/DID number in another country. I am currently running Asterisk CVS-HEAD. My foreign provider uses SIP and authenticates via IP address. I am not required to register my SIP connection in order to send or receive calls. Can someone help me with how to understand the

I am debugging an intermittent issue of missing audio on calls that come from a SIP provider into our asterisk-11.10 installation. Sometimes, incoming calls from this provider work correctly, with audio streaming in both directions. Other times, with the same setup, the calling party is unable to hear the IVR recording from the asterisk installation, although in fact the streaming is supposed to

I have ekiga registering to a voip provider (skypho) and receiving external call through the stun server. I want to redirect inconditionally all these calls to my asterisk server, but I can't understand how and what should I configure in asterisk in order to accept the redirected call. In asterisk console I can't see nothing when ekiga passes the call. If I turn asterisk's sip

I have a Linksys PAP2. Identical setups for the two channels in both the unit and in Asterisk. In particular, both channels enable g729 and set it as the preferred codec, and have disallow=all and allow=g729 in sip.conf. If we make a call on one channel, it works (and uses g729), but if we make a call on the other channel when the first one is still connected, it fails. We have three g729

SDP question if * recieves "a=rtpmap:103 telephone-event/8000" it shouldn't it send out the same "a=rtpmap:103 telephone-event/8000" to the other side of the connection? and not something like "a=rtpmap:101 telephone-event/8000"? Thanks