similar to: DTMF issues with SIPPhone?

I have been successfully connected (incoming and outgoing) to FWD for a very long time. A few months ago, I changed from SIP-based FWD service to IAX2-based, and that went fine as well, both incoming and outgoing. At the time, I was running Asterisk 1.0.3 Stable. I rarely use the service, so other than noticing that I was always successfully registered to FWD, I didn't make or receive calls

for inbound calls, i can register context = from-sipphone register => 1747xxxxxxx:passwd@proxy01.sipphone.com but how do i configure to make outbound calls to them? exten => _1747XXXXXXX,1,GoTo(dial-sipphone,${EXTEN},1) .... [dial-sipphone] ; ; SIP to sipphone.com ; exten => _X.,1,Dial(SIP/${EXTEN}@??????) ^^^^^^

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

I have a sipphone.com account, with asterisk set to answer incoming calls, using the following settings (phone number and password omitted) in the Peer Details for the SIP Trunk: allow=ulaw context=from-pstn dtmfmode=rfc2833 fromdomain=proxy01.sipphone.com fromuser=1747xxxxxxx host=proxy01.sipphone.com insecure=very secret=xxxxx type=peer username=1747xxxxxxx The Asterisk machine is

I've beaten myself bloody dealing with this one... No luck so far. In summary, incoming calls from Gizmo establish, but neither get nor send sound. Outbound calls to Gizmo work fine (well a bit choppy but work) My thought is that the SIP connection is being made fine, but the RTP is getting stopped / blocked / misdone somewhere. Here is the thing: Asterisk 2.5 on Linux (No hardware

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

With 1.6.1 svn: [2009-04-26 15:01:00] NOTICE[1844]: chan_sip.c:9927 sip_reg_timeout: -- Registration for '17470121145 at proxy01.sipphone.com' timed out, trying again (Attempt #30) [2009-04-26 15:01:00] WARNING[1844]: acl.c:376 ast_get_ip_or_srv: Unable to lookup 'proxy01.sipphone.com' [2009-04-26 15:01:00] WARNING[1844]: chan_sip.c:10037 transmit_register: Probably a DNS

Hello when i dial a toll free no using sipphone i get this error message. How do i solve this? Any help will be appreciated. console message: Starting simple switch on 'Zap/2-1' -- Executing SetCallerID("Zap/2-1", "17473863282") in new stack -- Executing SetCIDName("Zap/2-1", "Deepak JV") in new stack -- Executing

Hi, Does anyone know how to dial toll-free (800) numbers through FWD or Siphone? Using the configuration below, I can dial out to SIPphone.com users by simply dialing their number (1747XXXXXXX) and can dial out to FWD users by dialing 1383<FWD#> However, when I dial 18005551212 through SIPphone, or through FWD (depending upon which line is selected in "; 800 Toll Free Numbers"

When attempting to call one of the example numbers, like 17474745000, I only get "488 Not Acceptable Here". It works fine when I configure the softphone (Xten X-Lite) to use sipphone's server directly. Am I missing something? Here's my relevant config sections: sip.conf: in [general]: register => 17472442457:mypassword@proxy01.sipphone.com [sipphone] type=friend

Hello All. I started setting up my Asterisk system yesterday and everything was going well, i have registered with sipphone.com and set-up my Asterisk system to register with sipphone per the sip.conf file below. It was registered perfectly but I could not receive calls so I added in the line "insecure-very" and I then used the Washington DC access number to test and the phone

In the following scenario, the user calling from a SIPphone registered phone is able to transfer the called user to another extension. sip.conf: [general] port = 5060 context = from-sip register => number:password@proxy01.sipphone.com extensions.conf: [from-sip] exten => s,1,Dial(SIP/111&SIP/117) exten => 111,1,Dial(SIP/111,20) exten => 117,1,Dial(SIP/117,20) 1. The calling user

I am getting the following on dial-out via Sipphone to a 1-800 number (numbers obscured): ------------------------------------------------- == Spawn extension (macro-sipphone, s, 3) exited non-zero on 'SIP/eric-9546' in macro 'sipphone' == Spawn extension (default, 1747xxxxxxx, 1) exited non-zero on 'SIP/eric-9546' -- Executing Macro("SIP/eric-8e80",

Hi, Anyone know how to set up tftp server for grandstream. I gues it should be somethink like <tftpserver-dir> <mac-address> firmware.bin config.txt Is this correct ? And how should the config-file look like. ? I had search sipphone.com but did'nt find anything. /HHA _________________________________________________________________ Rethink your

Hello, can anyone comment on how one could use SIPphone's $89 All-in-One adapter with Asterisk? Sounds to me like it should work as both a FXO and FXS. It would be a cheap way of getting started with Asterisk and PSTN. Any comments on the SIPphone FX200? Any comments on SIPphone in general? Thank you for your help

Has anyone else had problems registering with Sipphone over the last few weeks? Previously, this had worked fine. I contacted Sipphone technical support, but they're not much help. register => 17471234567:password@northamerica.sipphone.com/123

I'm getting these messages every 7-10 seconds. -- Registered SIP '532' at x.x.x.x port 52956 expires 60 -- Registered SIP '532' at x.x.x.x port 56988 expires 60 -- Registered SIP '529' at x.x.x.x port 51444 expires 60 -- Registered SIP '529' at x.x.x.x port 64044 expires 60 -- Registered SIP '532' at x.x.x.x port 52956 expires 60 -- Registered SIP

Hello all, I'm having a problem with getting incoming callerid to a lan-connected phone. The Asterisk server is connected to the Internet, and a Grandstream BT101 phone on a lan interface: INTERNET ----(eth0) Asterisk (eth1) ---- Grandstream (192.168.1.51) The phone registers with the Asterisk server as ext 20. I can initiate and receive calls from the Grandstream phone fine. The

I am newbie trying to setup about 12 Polycom Ip500's on an asterisk server. I am working on my extensions.conf and am trying to make it so that all my extensions can dial each other. My extensions are number 720, 721, 722, 723 ..etc in my from-sip context I began doing entries such as: exten => 720,1,Dial(SIP/720,20) exten => 720,2,Voicemail(u720) exten =>

Hi all. I found a connection error from sipphone.com. It seems 'realm based authentication' by sipphone.com. any ideas? Regards. mack