similar to: Configuring Asterisk@home for Sipgate.

The bounty stands at $5,500. I'm seriously considering taking a shot at it if I can find a decent T.38 provider to test with (I'm still hoping for reliable PAYG T.38). It looks like a lot of very smart people have done a lot of very hard work (t38modem, spandsp) that would go towards getting this working. At this point it appears to be mostly a matter of integration

Hi all, We use AAH to run our office telecoms registered with two Sipgate accounts. Today, Sipgate appeared to have had problems with their server with oneway audio on every call. In order to cause the Sipgate message service to pick up in stead of our AAH box, I simply unplugged the network cable. We now have problems where AAH does not seem to access the network. I plugged the network cable

Hi, have some problem with incoming calls from sipgate. This was working in 1.4 but in 1.6 I get a 401 Unauthorized :-(. Sipgate has mentioned that I have to change the type to friend, but it is already friend, so what's wrong? Kind regards, Michael Here is the sip.conf: [sipgate_out] type=friend nat=yes username=1234567 fromuser=1234567 fromdomain=sipgate.de secret=secret host=sipgate.de

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

Hi, Anyone here using sipgate.de ? It worked for months, but for a couple of days now I'm unable to register with them. My account is ok, because I can login to the website. Asterisk keeps showing me: Feb 25 23:50:18 NOTICE[5144]: chan_sip.c:5269 sip_reg_timeout: -- Registration for 'XXXXX@sipgate.de' timed out, trying again (Attempt #n) I looked at the sip debug stuff, and all I

Hello, I've been looking at the DialPlans by some poeple using Asterisk with SipGate, but the new Asterisk@home 1.0 allows you to create Outbound routes etc, does using the web admin give the same effects? When I add a SIP Trunk with my Sipgate settings and use a pattern of "8|." to place all calls with a 8 prefix tot he sipgate account the softphones dial the number, the Asterisk

Hi all, I have two sipgate accounts (numbers), if I have both accounts register only one will work for incoming calls (which is all i'm interested in). However if I disable either account the other account will work perfectly. Am I missing something obvious? Thanks in advance, Ray. Excerpts from sip.conf - [general] 8<---- SNIP! ---->8 Register => 1212121:aaaaaaaa at

Hi, I have a few accounts with sipgate.co.uk to get some different DiD numbers. However, when an incoming call comes in, it seems to pick the wrong peer from sip.conf which sends the call into the wrong context and it fails because there is no extension in that context to match the register. Using the config's below, if I dial the DiD on account 2222222, it works fine - picks peer 2222222

Hello all. I'm having an odd problem getting * and sipgate to work together. From Sipgate support I have gotten this repsonse to my query: ===== Your Asterisk is registering incorrectly with our servers. It registers like this: sip:s@217.XXX.XXX.XXX:5076 The "s" should be your SIP ID. Anything else is rejected. I don't know where you can find this setting, but from our

All, I've been experimenting with shortcodes for SIPgate etc. Passing calls to SIPbroker seems a good way to go, but the message I've had back from SIPgate is "we don't support SIPBroker"... So whats the easiest way to support SIP <> SIP network calling? At the moment, I've setup some local shortcodes (eg dial **777. to goto sipgate.co.uk) based on what Gradwell

I could call a regular phone through sipgate. Now i can not: Failed to authenticate on INVITE to '"xyz" <sip:4xxxxxx@sipgate.net>;tag=as4ddd4a6f' A call from outside to my sip-phone through sipgate is OK. Can anyone verify ? Is it a sipgate problem ? greetings nicolas

hi anybody running with german SIPGATE? my configuration don't works :-( regards thorsten@gehrig.de

Hi, I have installed Asterisk, Zaptel, Libpri, Addons, Sounds in my Linux system. I got registered with sipgate.co.uk and got the UK phone number i.e., 0207100xxxx. I configured my Asterisk server with 0207100xxxx. When I made a call to this number from outside phone, my XLite extension is not ringing. Its directly going to Voicemail or telling that "person is unavailable". When I

Hi all I use sipgate and FWD but seem not to get it going. I do not have NAT on the asterisk box (static ip). The asterisk box has 2 network interfaces. One internal and one external. Now when I make an call to a FWD or SipGate number all I get is -- Executing NoOp("SIP/113-6d2e", "") in new stack -- Executing Goto("SIP/113-6d2e",

I raised an issue with Sipgate because my Asterisk 1.6 plain refuses to recognize digits pressed on a keypad coming in from a Sipgate trunk. There answer was to set this: dtmfmode=rfc2833 in the general section of sip.conf This has made no difference. I've tried a range of settings (auto, rfc2833,info) but no matter what, it plain refuses to pick up key presses. Locally, if I call from an

Hello all, With some help from people in #asterisk on freenode, I've managed to get incoming SIP calls working. Outgoing calls however are however a different matter. My whole working (incoming calls only) SIPgate configuration can be found here. [1] When I uncommon what's in there, nothing works. There doesn't appear to be any useful error being logged , even when debug is

Hi i have a trunk up and running with Asterisk and Sipgate.de and i can make call out but no call in but the Enddevice Status on the Sipgate Webpage says offline. Maybe somebody had the same problem in the past and can give me some hints ? Regards MArkus

Hi, my zaphfc is flooding my syslog with two messages (even without asterisk running). Is this "normal"?: -------------------------------------------------- zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353, wanted 8 got 7), probably a buffer overrun. zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9). With Asterisk running (asterisk -vvvvvgc)

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

I'm getting really wierd errors from them, like bad packet checksums: Jun 27 18:22:56 NOTICE[29051]: rtp.c:435 ast_rtp_read: RTP: Received packet with bad UDP checksum - a -- "I didn't see it then, but it turned out that getting fired was the best thing that could have ever happened to me. The heaviness of being successful was replaced by the lightness of being a beginner