similar to: h323 CALL PROBLEM TO / FROM AVAYA(UCENT)inity

Hello, We want to make H323 calls between asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but Asterisk does not. Do

I'm trying to make H.323 trunk between AVAYA&Asterisk. But call from AVAYA is terminated inmediatelly when apps DIAL on Asterisk is started. Does any one use AVAYA and h.323 channel? Thanks Bob.

I am tasked with linking an Avaya Definity switch to an asterisk box using it's IP card that handles H.323. All my googles turn up a lot of results but nothing recent. I am able to find instructions but they are dated from 2005, and often fail halfway through. What is the best way to achieve what I want, which is two way calling between the Avaya switch and Asterisk server using h.323, and

Hi List, I would like create a H323 trunk from Avaya IPOFFICE to Asterisk, but i would like activate a "direct media path" for the RTP transit directly between the phone and the Asterisk. Now, - H323 Trunk is OK - RTP from the phone transit directly to Asterisk (activate "strictrtp=no" in rtp.conf, and "Allow Direct Media Path" option in Avaya Ipoffice) H323: Phone

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

Hi all I have a following problem. I want to use sjphone to connect to asterisk sip server and then I want asterisk to do a conversion to h323 and send this to h323 gateway. sjphone---sip----ASTERISK----h323-----GATEWAY Example: if someone from plane PSTN line dials 123456 the gateway will forward this to asterisk and asterisk will forward this to sjphone and the other way around. Could

I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file. Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11 I tested it with following phones: -- XLite (SIP softphone) -- QMix SIP IP phone (PA168F) -- SJPhone (H323 softphone) -- QMix H323 IP phone (PA168F) -- FireFly (IAX2 softphone) Everything works fine except a problem

Hi all, I'm using following software and equipment and I have very strange behavior: Asterisk CVS-NHEAD-05/30/05-16:42:41 H323 gatekeeper - GnuGK 2.2.2 IAX2 client - Firefly 1.9.8 build 3945 H323 client - SJPhone Build 1.50.271d H323 gateway - Welltech Wellgate 3504A When I dial from Firefly (IAX2) -> SJPhone (H323) everything works as expected. When I dial from SJPhone (H323) ->

hi all, i have one (teles) pbx with a BRI telephone and an outgoing E1 port. The outgoing E1 is connected to an pri_net port from my *. The incoming call will dail out to a h323 soft phone like openphone or sjphone or just netmeeting. The call will be conneted, but i don't hear any sound, from no one of the both sides. Can somebody help me? Thanks, Thomas.

Greetings, I have a problem making a call from Asterisk to Cisco H323 PSTN gateway using H323 channel. I can call but there are no sound in both way. If I call H323 gateway directly from SJPhone I have no problem with sound. Any advice are welcome. Thanks in advance.

Hi All I seem to have a small problem with the music on hold button on SJPhone. I have 2 asterisk installations one from the Rapid distribution and one from the latest CVS. On the rapid dist when I press the music on hold button on my SJPhone I get music on hold. When I do the same I get no music on hold just silence. I create extension like this exten => 1111,1,MusicOnHold(Default),

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Hi, I have about one year of experience with Asterisk, working with ZAP (digium, junghanns) ZAPHFC, SIP and IAX. These technologies are quite clear to me, the problem is that I have no experience with H323, but now, I need to use this also. The problem that I have is very trivial, so I think that this should be a very easy question for you guys whom know how it works. All I want to do,

Dear All. I have installed Asterisk-1.0.6 on FreeBSD-5.4 RELEASE via port, so the chan_h323.so modules already included. When i try the SIP channel, asterisk works fine. In this case, i use the XLite softphone as client, i can hear the voice transfered through clearly. Asterisk is good!! :D The problem is when i try the H323 channel, the voice cannot be transferred through. I have

Hello everybody, I?ve been trying to solve a problem for several weeks now but it really beats me. There are several hard phones connected to an Innovaphone 3000 VoIP gateway. On the other side I have a SIP softphone connected to Asterisk. The problem I have is that on incoming calls (hardphones to softphone) I only have outgoing audio (from soft to hardphone); everything is OK when I call the

Full_Name: Axel Benz Version: 1.7.1 OS: Windows Submission from: (NULL) (137.251.33.43) This feature seems to be a basic bug: > 1=="1" [1] TRUE > as.numeric(1)=="1" [1] TRUE > as.numeric(1)==as.character("1") [1] TRUE isn't it necessary to distinguish beteen numbers and characters?? Best Regards, Axel

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Hi I've a softphone account to a AVAYA H.323 system, basically, it has a numeric ID (which is the extension number) and a numeric password. Instead of using the default AVAYA softphone (H.323), can I make asterisk as a H.323 client and login to the AVAYA system via any one of its h323 modules? -------------- next part -------------- An HTML attachment was scrubbed... URL: