similar to: send an sms through a gateway GSM (stargate)

Hello all, After reading through the Wiki and archives, I decided to take a stab at installing * on Solaris 9 SPARC. I checked it out via CVS last night as well as about an hour ago, and have run into a compile problem that I can't quite figure out. After running into some unlisted dependencies, such as popt, things are almost compiling. Right now the make bombs when trying to find setenv

Hi, I worked with Asterisk 0.7 without problems until I tryed to load H323. I downloaded the last version and after some try I compile it. I followed the description in /asterisk/channels/h323/Readme and the compilation of this part was good. But the new compilation of Asterisk was impossible (problem with chan_h323.so). I search info with Google and I read that the problem could be with the

hi all i'm getting the below error when trying to compile asterisk-1.4 on redhat-9.0 any suggestions ? make[2]: Leaving directory `/usr/local/src/asterisk-1.4.0/menuselect' make[1]: Leaving directory `/usr/local/src/asterisk-1.4.0/menuselect' Generating input for menuselect ... menuselect/menuselect --check-deps menuselect.makeopts Generating embedded module rules ... [CC]

Hello, i just want to activate SMS service between my asterisk local sip accounts and between asterisk and local sip accounts. How can i do this thin? Also i tried smsq to an account but all i obtained is a error message: ---<Cut Here>--- May 22 13:09:37 WARNING[4829] pbx_spool.c: Unable to open /var/spool/asterisk/outgoing/smsq.motx.0.1179827912-4429.1: Permission denied, deleting May 22

How to compile smsq in 1.2? It is compile in 1.4 by default. It is included in 1.2.13, but not compiled. Any rule or method to make it? Yuan Liu

Hi, i've been trying to get fixed line sms working for some time now. Can anybody tell me, if he is actualy using this with asterisk in germany? I have followed the instructions found on voip-info. I was successful a couple of years ago with asterisk 1.0.7 and an normal telekom isdn line. Now i want fixed line sms over an Dokom PRI with Asterisk 1.2.9. Here in Germany the Materna

> > I now have another problem with sending messages back to the phone, > when I run: > smsq -o0198339100 -q101 --mttx-channel sip/phone1 --ud "test" > You need to run smsq as the Asterisk user, or else the file is created with permissions that Asterisk can't read and/or move. James

When i send more than one messages shortly after the other, my log (/var/spool/asterisk/sms ) looks like this and only two of four messages arrive. What am i doing wrong ? I am using an AVM B1 PCI with chan-capi and 1.4.4. and also, when sending with smsq -x only two of the messages are handled. (i thought, asterisk itself handles the queues ? ) Here the log: 2007-07-09T15:04:14 YOM04 0 -

I've been googling and reading a lot, but I'm not getting any closer to getting an SMS sent via Asterisk. Prior to switching to asterisk, I used sms_client on an ISDN line to dial one of two Swisscom SMS centers: 0900900941 or 0794998990. My dialplan looks like this: exten => 0900900941,1,Goto(smsmotx,${CALLERIDNUM},1) exten => 0794998990,1,Goto(smsmotx,${CALLERIDNUM},1) ;

Hi, Searching this list archives, I couldn't find a definitive answer to my question : how to send SMS to Gigaset phones ? My goal is to send Alert SMS such as "This phone system will be stopped in 5mn for maintenance" to every terminal (SIP phones and Gigaset DECT phones). (So at the moment, I'm not looking for way to send SMS from handsets). I could successfully send 1 short

hi guy, i have a problem, i have an sellvoip account and i want configure asterisk for outbound calls. this is my sip.conf register => XXXXX0000000000:PassWord@70.42.34.200 ; this is one of the sellvoip server [sellvoip_out] type=friend secret=PassWord username=XXXXXX0000000000 host=70.42.34.200 dtmfmode=rfc2833 context=testing disallow=all allow=ulaw extensions.conf this is a semplified

Hi all, I've been trying to get SMS operational on my Asterisk box, which has a TDM400P card with a pair of FXO interfaces configured (ZAP/1 & ZAP/2). I've not had luck with either of my lines, after issuing the command "smsq --motx-channel=ZAP/1/1709400X 00000 register". I see the following output in my Asterisk console: -- Attempting call on ZAP/1/17094009 for

Hi, When I build the same asterisk package that I build on i386 on x86_64, I don't get /usr/sbin/smsq. AFAIK, the two machines have the same set of installed packages. What should I be looking for in the output of ./configure to get a clue of what might be missing? TIA. -- Bill in Denver

Hi all, I?m a beginner with asterisk and I want to know if with asterisk I can send sms to a mobile, I?m on Spain, and I don?t know this can be a problem (with the operators...) I have Elastix 1.3.2 and I have seen this url: http://mirror.su.lt/voip-info/wiki/view/Asterisk+cmd+Sms.html I have tried the smsq command but I can get it work, (as I say I?m a begginer and I don?t understand several

I am getting this error from call manager (4.0) and asterisk 1.2.4 I have canreinvite=yes on the call manager setup. I can call into the asterisk box from call manager. THat seems to work. When I am calling out of the box using a call file I see this entry from call manager... What might be the problem with my setup? THanks, JErry ---------------- <Date>03/06/2006

I'm trying to send an sms: smsq --motx-channel=CAPI/g1/0809101000 0607396666 "X" It seems to try to do something, but FT aren't happy: -- Attempting call on CAPI/g1/0809101000 for application SMS(0) (Retry 1) == ISDN4#02: Setting up DTMF detector (PLCI=0x104, flag=1) [Sep 13 15:45:50] WARNING[23584]: pbx.c:5142 ast_pbx_outgoing_app2: CAPI/ISDN4#02/0809101000-1 already

All, I'm trying to send an SMS directly from asterisk but it doesn't seem to be working. The SMS() function does create an outgoing file but doesn't deliver the SMS. Can anyone help me to understand how SMS() works. Thanks. extensions.conf example: same => n,SMS(hello,a,17654307001,"hello nick") - nick

Help, Any ideas ? I guess I missing something. make[1]: Entering directory `/usr/src/asterisk/utils' gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarat ions -g -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DASTERISK_VERSION=\"CVS-HEAD-12/27/04-21:28:39\" -DASTERISK_VERSION_NUM =999999 -DINSTALL_PREFIX=\"\"

Hi, I have been trying to get my asterisk box to send SMS's to my Panasonic dect phone via a Linksys pap2. I believe I have the message centers setup correctly between * and the phone. The pap2 is configured to only use G711a. The Asterisk version is 1.0.7. In my /etc/asterisk/extensions.conf I have [smsphone] exten = 199,1,Goto(smsmorx,${CALLERIDNUM},1) [smsmorx] exten =

Hello, I tried to send sms for local extensions and i observed that file is created but sms isn't delivered yet. Can someone help me with this thing? rr:/var/spool/asterisk/sms/mttx # cat ../../outgoing/smsq.mttx.0.1322430026-20217.1 Channel: Local/1010 Callerid: SMS <1010> Application: SMS Data: 0,s MaxRetries: 0 RetryTime: 30 WaitTime: 10 rr:/var/spool/asterisk/sms/mttx # ls -la