similar to: Transfer to outside line.

Is it possible to get an internal dial tone when I call to my asterisk and enter password? I would like to call my line enter extension - password - and get internal dial tone. once I'm in I would like to dial based on what context permits, mostly long distance calls VOIP. I can not preset the extension to certain number as I don't know what number I will be dialing. -- #Joseph

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

The way I have my dialplan configured, an internal extension is routed to a different context (with Goto()) on pretty much the first button press. 2 -> internal extensions 0 -> operator 5 -> VM 9 -> outside line etc. So a "201" will go to the internal extensions context, s,1, do some setup and then match on "01". The thing is that when the 9 is entered, I

Sorry for speaking too soon. It is missing from 3.2 which is the version I have been using. If it is already implemented than it is very good news. Thanks. -----Original Message----- From: Eli Bendersky [mailto:eliben at google.com] Sent: Monday, November 26, 2012 9:25 AM To: Manny Ko Cc: Albert Graef; Benjamin Kramer; LLVM Developers Mailing List Subject: Re: [LLVMdev] Removing old JIT

Thanks Andrew for the update. Does it support NotifyFunctionEmitted? Cheers. -----Original Message----- From: Kaylor, Andrew [mailto:andrew.kaylor at intel.com] Sent: Monday, November 26, 2012 1:06 PM To: Manny Ko Cc: LLVM Developers Mailing List Subject: RE: [LLVMdev] Removing old JIT CodeEmitters for ARM and PPC The current 3.2 code branch has events being broadcast from the MCJIT engine

Hello, I have an installation in Austria; ISDN service provided by Austria Telekom. The main number of the service is 6 digits. Incoming calls may contain 2 additional digits, which I then use to route the call to the correct extension. Telekom sends me all the digits. My problem is that when someone tries to dial an 8 digit number to an extension from an outside analog phone, AT sends the call

Hi Friends, I am facing a strange problem with DISA. I have installed and configured Trixbox. I've created a secret extension i.e., 555 and called this extension in Digital Receptionist using custom extension i.e., created in extensions_custom.conf file. When I call from my mobile phone to my PSTN number, which is connected to FXO port, my IVR is responding. After entering my DISA

I see. If I am writing my own listener can I still get back the (llvm::Function, void* Code, size_t Size)? Ciao. -----Original Message----- From: Kaylor, Andrew [mailto:andrew.kaylor at intel.com] Sent: Monday, November 26, 2012 1:24 PM To: Manny Ko Cc: LLVM Developers Mailing List Subject: RE: [LLVMdev] Removing old JIT CodeEmitters for ARM and PPC No. It adds a new event,

No. It adds a new event, 'NotifyObjectEmitted'. The Intel JIT listener that I mentioned then uses the emitted object to find the functions (which are all emitted together). Because of the way that MCJIT is implemented, it isn't really feasible to reconstruct things like the EmittedFunctionDetails in the NotifyFunctionEmitted event. -Andy -----Original Message----- From: Manny Ko

I'm running CentOS 4 with Blue Quartz on a white box, and having problems with installing Portsentry vi the .tar.gz route. Various errors, etc. Anyone here know of a source, like an RPM or something, for Portsentry for CentOS? ... or a similar app? thnx, Manny

> I'd like to create the following: a user picks up the phone > (gets a dial tone), dials '0' for an 'outside' line, gets a > second (different?) dialtone, and is able to enter an > external phone number. Klaus-Peter Junghanns has something like this on his page: http://83.137.99.170/jn/relaunch/asterisk/page19.html It didn't work for me correctly so I

Hi all, How can I configure, in extension.conf, to call and extension and have a dialtone so I can compose a number to dialout? Basically, I want to be able, when I am out of the office, to call in my asterisk box and then dialout from it. Regards, Francois

Hello, list! I'd like to create an extension that points to an offsite location (a number on the PSTN), the purpose of which would be to see if that offsite location is still on a call forwarded to it by Asterisk. This way a receptionist could choose to transfer calls to a mobile phone only if it's finished with the last call the receptionist forwarded to it. If I configure a custom

The current 3.2 code branch has events being broadcast from the MCJIT engine when a new object is emitted, but the profiling listeners do not do anything with the events (and I don't expect they will before the 3.2 release becomes official). I have implemented some code in trunk since the 3.2 branch to traverse the emitted object and pick out named functions in the IntelJITEventsListener. An

I have a closed network (no outside access) with a small user base (less than 20), with no other network connections) running Samba 1.9.18p10 on Solaris 2.4. Problem: Some users utilize the workstations on the network as stand alone systems. They need access to printers, but I don't want to create an account just for this purpose. I would like to provide access to the printers without

I've been downloading a software for a friend with wget, but as my connexion to internet is not so good, wget downloaded in three parts by example: SetupDxLabelMakerSoftonic.exe SetupDxLabelMakerSoftonic.exe.1 SetupDxLabelMakerSoftonic.exe.1.1 My question is: Is there any way to join all of this or Do I have to download that again? Hope an answer thanks to all manny -- "Nuestra

I know the old JIT pretty well but have only used the MCJIT from the client side. Most of my experience is on the x86backend though. Another critical feature missing from MCJIT is the JITEventListener. This is usually for supporting debuggers and profiling tools. Ciao. -----Original Message----- From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-bounces at cs.uiuc.edu] On Behalf Of Albert

DISA is currently disconnecting when I dial 8888 to access DISA. Below is my extensions.conf file from A@H and some lines which shows the disconnect. Should DISA be loaded as a module in modules.conf? When I do a 'show applications' i see that DISA is there. Help! -------------------------------------- ;Asterisk CLI as I placed a call from cell into the system. Playing

I'm having trouble getting an AGI exec command to spawn app_disa. The script executes properly, but does not spawn DISA. The CLI gives no helpful clues. Am I doing the exec incorrectly? I want to have a way to authenticate callers to the extension by Caller ID... if their caller ID is in my database and set to active, they can call out. [like a calling card but auth'd by CID instead

-------------------------------------------------------------------------------------------- Originally posted at http://forums.digium.com/viewtopic.php?t=18045 -------------------------------------------------------------------------------------------- Hi! I'm trying to configure a DISA setup (Asterisk 1.4.11). Only, executing DISA seems to prevent any DTMF detection capability when using