similar to: Asterisk & ISDN

Hi, I'm wondering if someone tried to use Asterisk and ISDN as an ISDN simulator for Cisco lab. Searched the net but I didn't find anything. Thank you, Mihai ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs

I am one of the few people left in the US with a ISDN connection to the internet. (Internet cable has been promised "Real Soon Now" for a couple years). Worse, my home network runs on a decrepit Cisco 2500 series router, and is double-natted via a firewall, which is why I currently use iax to call anywhere. I have been making ever-increasing use of my asterisk PBX, and I'm ready

Hi All, I currently run asterisk in our office (in Japan) and use a cisco PRI gateway for connection to the PSTN. I would like to setup some more systems for our smaller offices (in Japan) that would use BRI and preferably using a PCI card in the asterisk box and not a seperate Cisco gateway (expensive). HOWEVER, Japan has this INS64 protocol for their BRI lines and im not sure what cards

All, I need to run this by everyone and see if someone has any idea's. I have a asterisk server setup and currently am receiving the inbound calling number where the name should be. My setup is.... One pri terminating into a Cisco 2431 router Sip messages from the Cisco get sent to a asterisk server linksys ata's a each remote end. I can receive the calling name if the call originates

Greetings - We've a pair of ISDN BRI that we use for dialtone, fairly happily except for the recent meltdown of one of our Netgear RT338's. We're in the middle of slowly migrating to a VoIP/Asterisk-on-FreeBSD based phone system. I had originally considered just buying a Digium TDM400 card and continuing to use the RT338's to bring out POTS lines from the BRI's, but the

Hello. It seems very very strange to me that nobody talks about connecting ISDN lines to asterisk using a device with RCAPI Support. There are some devices (most of them isdn routers, like the famous Cisco 800 family) that support this protocol. It basically is an ISDN to IP gateway. There used to be software that used this technology to send and receive faxes, act as voicemail and even ISDN

Hi I am trying to connect asterisk with a Cisco GW 2600 with E1 pri using a Digium, Inc. Wildcard TE210P dual-span T1/E1/J1 card 3.3V (rev 02), Errors: [Jan 28 17:32:33] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 up [Jan 28 17:32:33] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jan 28 17:32:34] NOTICE[6182]

Hello everybody! After checking the complete wiki and the mailinglist archives I still haven't really found out why the following constellation does not work. We have an asterisk-System with some SIP-Phones and an old ISA Fritz-ISDN-Card used with i4l. The whole system is integrated in out (ISDN-)PBX for testing. The ISDN-Card is properly configured, as we are able to phone out, receive

configuration ISDN BRI card : ISDN Olitec PCI 128 (hisax gazel) internet connection by ISDN 64kb/s dynamic IP nom de domaine registered to : dyndns.org avec ddclient to register IP par ddclient asterisk (on internet gateway) configuration pour ISDN BRI par virtual modems /dev/ttyI* (modem.conf) logical telephone SIP "SJPHONE" on 2 local stations "windows" (i don't succeed

I'm experimenting with asterisk. This is my environment: - Debian sarge (vanilla kernel 2.4.29) - Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g - Two sip phones (One cisco 7905 and one soft-phones X-Lite) - Digi International Datafire Micro V (Europe) (rev 02) (zaphfc) After two days of work now I can call between the two sip phones and I can call from sip phones to outside numbers via ISDN card.

Hello All, Just got one general question on ISDN error code 42. As per Cisco docs and Wiki (http://www.voip-info.org/wiki/view/Asterisk+variable+hangupcause) it says "Switch equipment Congestion" with explanation "The destination cannot be reached because the network switching equipment is temporarily overloaded"... My question is are the calls treated as

hi all, i recently subscribe for an isdn and terminate it on a 3825 router. i used it as a sip trunk for my asterisk. i'm a newbie when it comes to ISDN. and i've been experiencing some issues: 1. Call Hangup: When hangup is initiated from the outside the extension (softphone/ip phone) does not hangup, is this normal? shouldn't asterisk hangup the extension as well when it

Hello; we are looking to replace our current PBX with a *-box; it is connected to ONE ppp isdn connection that is terminated by the NC. We got on this box 4 msn's configured. currently we are working with pstn fxo's behind the PBX; it works but we can't use the CSID information behind it. We want to migrate and keep the MSN's to decide routing in combination with the CID.

Hello asterisk community, I have successfully set up asterisk as a SIP PBX and now would like to connect to the outside world using a Cisco 2600 with VIC-BRI as an ISDN gateway. This works already in the lab, but I have security concerns before conecting the gateway to the internet. I currently don't know exactly what VoIP services the Cisco runs by default besides SIP (H.323, MGCP, ...)

On 2016-08-29 12:28, Eric Klein wrote: > Hi Hooman, > > What you probably want is a PRI PBX running Asterisk. > > You should either plan to build your own (with the cards you need) or get one of the low cost options: > > * Allo.com has their Mega PBX with 1 PPR port (http://allo.com/megapbx-line.html) > * Pika Tech has the Warp PBX with BRI

Hi all, I've been playing about with Asterisk for years now on and off, just SIP to SIP calls, using FWD and suchlike. I'm moving house at the beginning of September and have decided to build an Asterisk based system for my home office. I'm in the UK and wonder if anyone can give me advice on lines and hardware to use. Had planned to go with an ISDN2e line coupled with a BT

Hi To troubleshoot FreeBSD panics triggered by ISDN load on an asterisk system, we are looking to buy an ISDN call generator/simulator device. The minimum requirements include: - Not too expensive - PRI support (BRI support is a plus) - CCS+CRC4 farming + HDB3 coding - EuroISDN (DSS1) support. - A minimum of 4 ports (120 channels/concurrent calls) - Compatibility with Digium cards. - DUT in TE

Hi, I live in Italy and I have an Asterisk 1.0.7 box with a HFC monoBRI card connected to my cisco router which is connected to FastWeb provider: does anybody knows why every time my cisco router turns off, my telephone connection to Fastweb drops (while internet connectior is ok)? Restarting Asterisk is worth nothing. TIA Giorgio --

Hi, I need to set up call forwarding from the operator to one of our internal numbers. Asterisk get the incoming call and Operator A or B answer to the call. Then he/she should redirect the call to any of our internal numbers or an internal group. I'm using CISCO 7912 fot the client and two CISCO 7960 for the operator all with chan_sccp. How can I make it possible? Thanks in advance to

Hello, I am using a Cisco-2,811 router with PRI as a gateway between Asterisk and Nortel TX-1. I had problems with name transfer and with the help of Cisco support I've fixed it. Enclosed here are the definitions needed for it. BTW, Cisco's CCM is using MGCP thus the Q.sig is handled by CCM. Here I am using SIP so the router must decode/encode the Q.sig. The Nortel should be defined