similar to: [PLEASE RESPOND] Supervised transfer over SIP to outside POTS lines

Hello all, I am trying to complete my dial plan and have come up with an interesting situation. My configuration is set up with 12 xlite SIP clients on SUSE linux workstation. They are calling out via 10 analog lines, TE110P->rhino 24 fxo. It all works and dials out great ... but ... this unit was brought in to handle the "global" office. So the help desk support on the Suse

Good...it almost works fine! I just have 't' in command Dial, but i also have 'T'. Is it a problem ? This is my Dial() exten => 605,1,Dial(${GIORDANO NAT},60,Ttr) I have only a problem: A and B are speaking, B calls C and ask it if wants speak with A, C accept but if B hang up A is waiting and C get busy tone. To make it works B don't have to hangup but habe to press

Hi folks, I was using the following featuremap: blindxfer => *1 disconnect => *9 atxfer => *2 parkcall => *7 automixmon => *0 and everything worked. Then the need arouse to use some features like automixmon during a conference, but MeetMet has the * key bound to the (admin) menu. Thus, in order to enable features like automon and transfers even during a conference, I

Hi List. I have a small problem in using the transfer key transfer of IP Phone in Asterisk 1.6, I think I spend some detail in the configuration but can not find. What happens is, when I do a transfer using the Transfer button, the phone, does not play the music on hold, which is waiting on the phone is silent, and I have the same settings on a 1.4 server, and the music plays correctly when

Hi list, I'm wondering if it's possible to transfer a call that is still ringing??? I Have some Grandstream GXP-2000 and with the TRNF button it's impossible. So, I've configured some keys to transfer the calls like this: [featuremap] blindxfer => #2 ; Blind transfer (default is #) disconnect => *0 ; Disconnect (default is *) ;automon => *1

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Hello all. Dialing with tT options and function Read (to prompt number) has a trouble for me. Can I temporarily features off during Read? features.conf: [featuremap] blindxfer => ## ; Blind transfer (default is #) atxfer => ** ; Attended transfer I try: exten => s,n,Set(LOCAL(tmp_atxfer)=${FEATUREMAP(atxfer)}) exten =>

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

Hi, I have been trying to enable attended transfer for callee. When the callee pressed *2, DTMF tone was heard by the caller. But when the caller pressed *2, attended transfer started. It's strange. I used two SIP phones. My Asterisk version is "Asterisk CVS-HEAD built by root@router on a i686 running Linux on 2005-06-27 06:07:18". In features.conf, I have: [featuremap]

I am trying to test the call parking, but It doesn't fonction :(these are my config files.extensions.conf:include=>parkedcallsexten => 4000,1,Dial(SIP/4000,60,tT)exten => 4001,1,Dial(SIP/4001,60,tT)exten => 4002,1,Dial(SIP/4002,60,tT)In features.conf:[general]parkext => 700 parkpos => 701-720 context => parkedcalls [featuremap]blindxfer => # disconnect => *0

i have TB instaled and i cant get call pickup when another phone rings i tried ** , *8 , *8# , **+ext but nothing seems to be ok.on extention menu i put call pickup=1 and call group=1 but nothing look at my features.conf; ; Sample Parking configuration ; [general] ; do not manually enter parkinglot config information, use the parkinglot module ; ; the parking_additional.inc file is

I have a group of local users. They want to participate on a conference call to a PSTN line in USA. To connect they need to enter a code there as well. I want to use a local conference room, where LAN users and local users can call in. The conference room should be connected to the conference abroad. features.conf has: [featuremap] blindxfer => #1 ; Blind transfer ;disconnect

Hi Is there a way to disable blind and attended transfer during a call. I am trying this configuration but unfortunately with no luck: - in features.conf [applicationmap] disabletransfer => 9*9,self,GoSub(disabletransfer,s,1) - in extensions.conf [incoming] exten => 99,1,Set(__DYNAMIC_FEATURES=disabletransfer) exten => 99,n,Dial(Sip/alice,120,tT) exten => 99,n,Hangup()

Eric Wrote: ----------- The trick is not to use options you don't understand. "show application dial" will show you what the t and T options are for. Most people use the transfer feature of their phone, rather than using the T/t hack on the Dial line. Sounds like you are using CVS-HEAD and so will have to configure stuff in /etc/asterisk/features.conf. /Snip/ Eric, Thanks for

Just upgraded to 1.8, we use the multi lot parking feature by dialling *4. We are not getting the parking slot announcement being played to the person who parks the call, so it's impossible to tell which slot they've gone into. Could someone check our config? On Debian Squeeze using packages from http://packages.asterisk.org/debsqueeze main (Asterisk 1.8.11.1-1digium1~squeeze)

Hi - I'm trying to implement the applicationmap stuff in features.conf, and I can't seem to get it to work. I'm testing it out on 1.2.2 with Polycom IP500s and Snom190s. My features.conf looks like this: [general] parkext => 700 parkpos => 701-720 context => parkedcalls parkingtime => 240 transferdigittimeout => 2 ;courtesytone = beep

Hi, I recently moved all of my conf files over to a new Asterisk 1.2.4 server and every works except the features enabled in features.conf. Was there a syntax chnage in 1.2.4? Or is there something else... Here is my features.conf: ******************** [general] parkext => 880 ; What ext. to dial to park parkpos => 881-890 ; What extensions to park calls on context

Hi I have configured attended transfer in features.conf like this [general] parkext => 70 ; What ext. to dial to park parkpos => 00-99 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 300 ; Number of seconds a call can be parked for

Dear All, I have a problem with call transfer. When I dial a number and then I want to transfer current call to an extension, I'm getting disconnected. Transfering incoming call works fine. I'm using macro for dialing. extensions.conf: [from-internal] ignorepat => 9 exten => 200,1,Macro(stdexten,200,SIP/dzalewski) [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})})