similar to: US CallerID and TDM04B

Hello, I am looking for 4 port FXO low profile PCI card that could be used with Asterisk. Digium TDM04B sound like a good choice but it is half high PCI card and I can not plug it in my Dell box (small box). I am looking for adequate low profile PCI card (55mm high or similar but definitely smaller than TDM04B so I can plug it in). Does anyone know where to search for it? Thank you in advance,

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: VoIP.gif Type: image/gif Size: 17666 bytes Desc: 1197705770-VoIP.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060213/7ca1c4ac/VoIP.gif

Hi, I'm currently running asterisk 1.0.9-r1 and zaptel 1.0.9_p1-r1 (the current gentoo ~x86 versions), with the UK CallerID patches from http://www.lusyn.com/asterisk/patches.html applied. The Zap interface itself seems to work fairly well - although it's a little quiet, there is no echo. Unfortunately, there's also no CallerID. My zapata.conf is as follows: [channels]

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic analog, audiocodes SBC, etc, and we use ATA Converter to convert from SIP to Analog (CO Line)

I have a customer running Asterisk 1.2.13 with Zaptel 1.2.11 that is having calls dropped. Sometimes you can stay on the phone for a long time and sometimes the call is dropped within a minute. There are 9 lines connected to 3 TDM04B cards. The Panasonic Pbx we replaced did not have this problem. There are 8 SIP phones and 16 analog phones connected to two Astribank-8 units and everyone

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am an Asterisk newby, and I cannot seem to get Caller ID information from our T1 line. When calls appear at the phones, they say the call came from "asterisk" and unknown number. I know how Caller ID information is passed on an analog phone line (between the rings) but with a T1 line, I don't know technically how it is done. I don't see the caller's number in the

Hello, We have 4 'Onramp-2' Telstra ISDN BRI services operating on Asterisk Server with Eicon 4BRI card. For most part the service is okay. However, we are are having problems with passing callerID to internal extensions. This is the set of command executed. exten => <pattern>,1,Answer ; Answer the line exten => <pattern>,2,NoOp(${DNIS}) ; debug statements exten =>

On how to even search for this "feature" as I have no idea on what it can be. I've got a meridian linked to * (by EuroISDN) which is linked to a ISDN30. I can make calls from the meridian, and receive calls into the meridian. Great stuff. However, if someone dials an invalid number, then instead of hearing a "three tone", the line just drops and goes dead. The console

Hi, I have been trying to get my asterisk box to send SMS's to my Panasonic dect phone via a Linksys pap2. I believe I have the message centers setup correctly between * and the phone. The pap2 is configured to only use G711a. The Asterisk version is 1.0.7. In my /etc/asterisk/extensions.conf I have [smsphone] exten = 199,1,Goto(smsmorx,${CALLERIDNUM},1) [smsmorx] exten =

Hi guys, I posted a somewhat similar question about a month ago and got a thoughtful resonse from Steven Critchfield, but I've got a quick follow up question to it. I'm looking to setup a 16 extension / 10-14 phone line Asterisk install for a customer who would like to have DID numbers for the extensions, since they're currently on Centrex and already have the 1-to-1

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

I apoligize in advance for this newbie question on what I perceive as a mostly advanced level list... I did some searching, but would like some of your expert opinions. I'm building an asterisk server to be used in the home, both to learn, and as proof of concept of applying this solution in a home. To keep costs down, I'm considering one X100P ($25 ebay clone) card to connect the

Hello everybody, i'm from Mexico, at the time i?m working on a production server with asterisk 1.2.25 + spandsp-0.0.4 + libmfcr2-0.0.3+libsupertone-0.0.2+libunicall-0.0.3 and zaptel-1.2.22. I installed this version of astunicall that i downloaded from http://www.moythreads.com/astunicall/ Everything works fine, i'm able to make outgoing calls and recive incoming calls with all ANI and

I am not getting any caller Id with my standard T-1. Is a standard "T" capable of sending callerid? I don't want to spend time troubleshooting my PBX if Asterisk can't send it down that type of trunk. Jordan -------------- next part -------------- An HTML attachment was scrubbed... URL:

Okay, I can't find what might be causing this. Here is what I got: Asterisk server hooked up to a digital T1 line (full 24-channel) via a Digium card. Verizon has turned on caller ID on the first line (I can guarantee it is on as I can hear the FSK tones on this line but not the others). Using zttool an ZapScan() I have determined the following: 1) The RxB/RxD bits toggle from 1 to 0

I currently have: Telco-PRI ---- Panasonic DBS576 PBX ---- E&M wink T1 ---- Asterisk. I have configured the Panasonic to forward my Asterisk DIDs to the Asterisk extensions over the T1. I do not get DID nor CID on the Asterisk, so I want to use PRI between the PBXs. I do not want to pay for another PRI card for the Panasonic. (T1 and PRI are different cards) I see this as my least

I am trying to receive both CID and DNIS from the telco through a non-pri T1. Currently I have the T1 setup and operational both outbound and inbound calls are completed as should be expected. The calls came in and were placed in the context specified in zapata.conf on exten => s,1. I have requested that the telco provide callerid (they call it ANI) along with 10 digit dnis for my 800

Hi, I have three R2 installation on different carriers, all shows the same inconsistency at varying degree. But, on most test calls we made, it reaches T3. The worst part of these, the carrier claims that it's my R2 box that is not responding in time. Please, check the attached file and take note of the timestamp, you'll find that in some call, it already contradict what the carrier

Hi! I'm here again with echo canceller problem... :-( I think I've done everything to enable echo canceller feature, but it still doesn't work... Can anybody tell me if there is some error or something missing in this configuration please? I'm using Eicon Diva Server 4Bri. http://www.eicon.com/worldwide/products/MediaGateways/disv4bri.htm?techspec=1&regID=4999 Card